Download or read book Mechanical Engineers Handbook Volume 3 written by Myer Kutz and published by John Wiley & Sons. This book was released on 2015-03-02 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full coverage of manufacturing and management in mechanical engineering Mechanical Engineers' Handbook, Fourth Edition provides a quick guide to specialized areas that engineers may encounter in their work, providing access to the basics of each and pointing toward trusted resources for further reading, if needed. The book's accessible information offers discussions, examples, and analyses of the topics covered, rather than the straight data, formulas, and calculations found in other handbooks. No single engineer can be a specialist in all areas that they are called upon to work in. It's a discipline that covers a broad range of topics that are used as the building blocks for specialized areas, including aerospace, chemical, materials, nuclear, electrical, and general engineering. This third volume of Mechanical Engineers' Handbook covers Manufacturing & Management, and provides accessible and in-depth access to the topics encountered regularly in the discipline: environmentally benign manufacturing, production planning, production processes and equipment, manufacturing systems evaluation, coatings and surface engineering, physical vapor deposition, mechanical fasteners, seal technology, statistical quality control, nondestructive inspection, intelligent control of material handling systems, and much more. Presents the most comprehensive coverage of the entire discipline of Mechanical Engineering Focuses on the explanation and analysis of the concepts presented as opposed to a straight listing of formulas and data found in other handbooks Offers the option of being purchased as a four-book set or as single books Comes in a subscription format through the Wiley Online Library and in electronic and other custom formats Engineers at all levels of industry, government, or private consulting practice will find Mechanical Engineers' Handbook, Volume 3 an "off-the-shelf" reference they'll turn to again and again.
Download or read book Springer Handbook of Mechanical Engineering written by Karl-Heinrich Grote and published by Springer Nature. This book was released on 2020-12-09 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.
Download or read book Mechanical Engineering written by and published by . This book was released on 1908 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Text Book of Machine Design written by Rajendra Karwa and published by Firewall Media. This book was released on 2002 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Mechanism and Machine Science written by Masafumi Okada and published by Springer Nature. This book was released on 2023-11-04 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 16th IFToMM World Congress, which was held in Tokyo, Japan, on November 5–10, 2023. Having been organized every four years since 1965, the Congress represents the world’s largest scientific event on mechanism and machine science (MMS). The contributions cover an extremely diverse range of topics, including biomechanical engineering, computational kinematics, design methodologies, dynamics of machinery, multibody dynamics, gearing and transmissions, history of MMS, linkage and mechanical controls, robotics and mechatronics, micro-mechanisms, reliability of machines and mechanisms, rotor dynamics, standardization of terminology, sustainable energy systems, transportation machinery, tribology and vibration. Selected by means of a rigorous international peer-review process, they highlight numerous exciting advances and ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book A History of Mechanical Engineering written by Ce Zhang and published by Springer Nature. This book was released on 2020-01-03 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the history of mechanical engineering since the Bronze Age. Focusing on machinery inventions and the development of mechanical technology, it also discusses the machinery industry and modern mechanical education. The evolution of machinery is divided into three stages: Ancient (before the European Renaissance), Modern (mainly including the two Industrial Revolutions) and Contemporary (since the Revolution in Physics, especially post Second World War). The book not only clarifies the development of mechanical engineering, but also reveals the driving forces behind it – e.g. the economy, national defense and human scientific research activities – to highlight the links between technology and society; mechanical engineering and the natural sciences; and mechanical engineering and related technological areas. Though mainly intended as a textbook or supplemental reading for graduate students, the book also offers a unique resource for researchers and engineers in mechanical engineering who wish to broaden their horizons.
Download or read book Human Engineering Guide for Equipment Designers written by and published by Univ of California Press. This book was released on with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Invention of the Sewing Machine written by Grace Rogers Cooper and published by DigiCat. This book was released on 2022-08-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: DigiCat Publishing presents to you this special edition of "The Invention of the Sewing Machine" by Grace Rogers Cooper. DigiCat Publishing considers every written word to be a legacy of humankind. Every DigiCat book has been carefully reproduced for republishing in a new modern format. The books are available in print, as well as ebooks. DigiCat hopes you will treat this work with the acknowledgment and passion it deserves as a classic of world literature.
Download or read book Mechanical Design of Machine Components written by Ansel C. Ugural and published by Taylor & Francis. This book was released on 2018-09-03 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyze and Solve Real-World Machine Design Problems Using SI Units Mechanical Design of Machine Components, Second Edition: SI Version strikes a balance between method and theory, and fills a void in the world of design. Relevant to mechanical and related engineering curricula, the book is useful in college classes, and also serves as a reference for practicing engineers. This book combines the needed engineering mechanics concepts, analysis of various machine elements, design procedures, and the application of numerical and computational tools. It demonstrates the means by which loads are resisted in mechanical components, solves all examples and problems within the book using SI units, and helps readers gain valuable insight into the mechanics and design methods of machine components. The author presents structured, worked examples and problem sets that showcase analysis and design techniques, includes case studies that present different aspects of the same design or analysis problem, and links together a variety of topics in successive chapters. SI units are used exclusively in examples and problems, while some selected tables also show U.S. customary (USCS) units. This book also presumes knowledge of the mechanics of materials and material properties. New in the Second Edition: Presents a study of two entire real-life machines Includes Finite Element Analysis coverage supported by examples and case studies Provides MATLAB solutions of many problem samples and case studies included on the book’s website Offers access to additional information on selected topics that includes website addresses and open-ended web-based problems Class-tested and divided into three sections, this comprehensive book first focuses on the fundamentals and covers the basics of loading, stress, strain, materials, deflection, stiffness, and stability. This includes basic concepts in design and analysis, as well as definitions related to properties of engineering materials. Also discussed are detailed equilibrium and energy methods of analysis for determining stresses and deformations in variously loaded members. The second section deals with fracture mechanics, failure criteria, fatigue phenomena, and surface damage of components. The final section is dedicated to machine component design, briefly covering entire machines. The fundamentals are applied to specific elements such as shafts, bearings, gears, belts, chains, clutches, brakes, and springs.
Download or read book Truss and Frames written by Aykut Kentli and published by BoD – Books on Demand. This book was released on 2020-03-04 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the application of new techniques in analyzing truss and frame structures. The book contains two main sections: Numerical Analysis of Structures and Mass-Saving in Structures. Under each section, different approaches on the topic are given. Covered in these sections are dynamic stability analysis, design optimization considering vibration, FEM analysis, topology optimization methods, and recommendations to build lightweight structures. It is believed that this book will be helpful to its readers for new perspectives on the analysis of structures.
Download or read book Theory of Gearing written by Stephen P. Radzevich and published by CRC Press. This book was released on 2018-05-15 with total page 1587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading expert, Theory of Gearing: Kinematics, Geometry, and Synthesis, Second Edition is intended for engineers and researchers in the field of gear design, gear production, gear inspection, and application of gears. It focuses on the scientific theory of gearing, in all its aspects, and its application to new gear types and designs.
Download or read book Fluid Mechanics and Fluid Power Volume 3 written by Krishna Mohan Singh and published by Springer Nature. This book was released on 2024-01-16 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed proceedings of the 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP 2022). This book brings together scientific ideas and engineering solutions put forth by researchers and practitioners from academia and industry in the important and ubiquitous field of fluid mechanics. The contents of this book focus on fundamental issues and perspective in fluid mechanics, measurement techniques in fluid mechanics, computational fluid and gas dynamics, instability, transition and turbulence, fluid-structure interaction, multiphase flows, microfluidics, bio-inspired fluid mechanics, aerodynamics, turbomachinery, propulsion and power and other miscellaneous topics in the broad domain of fluid mechanics. This book is a useful reference to researchers and professionals working in the broad field of mechanics.
Download or read book Mechanics of Machinery written by Mahmoud A. Mostafa and published by CRC Press. This book was released on 2012-11-07 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Machinery describes the analysis of machines, covering both the graphical and analytical methods for examining the kinematics and dynamics of mechanisms with low and high pairs. This text, developed and updated from a version published in 1973, includes analytical analysis for all topics discussed, allowing for the use of math software
Download or read book The Kinematic Geometry of Gearing written by David B. Dooner and published by John Wiley & Sons. This book was released on 1995 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describing a dynamic new approach to the design, manufacture and evaluation of gears, The Kinematic Geometry of Gearing is an indispensable tool of the trade for gear and power transmission engineers and tribologists. It presents an entirely new and comprehensive methodology for the design and manufacture of virtually all types of toothed bodies for general function transmission. The authors develop, from first principles, the kinematic relationships necessary to design and manufacture circular and non-circular gears and other contact-type motion/force transmission mechanisms. They also demonstrate--with the help of the enclosed software--how the user specifications can be implemented in an interactive PC environment such that gear pairs and cutter pairs can be designed concurrently. The revolutionary approach outlined by Professors Dooner and Seireg is based on mathematical derivations from various theories of kinematic geometry, especially the screw theory. This approach arms engineers and tribologists with a powerful new tool for enhancing the performance of conventional gears mounted on parallel or non-parallel axes. Furthermore, it has been proven capable of greatly facilitating the design and manufacture of new devices, revealing heretofore unexplained phenomena which currently hinder the advancement of the gearing art beyond application to constant speed transmission. It also provides a means of developing and manufacturing tools and gear forms which were previously difficult to conceptualize or implement. The Kinematic Geometry of Gearing is divided into three sections, with the first being devoted to introducing the basic concepts and various types of toothed motion/force transmission mechanisms. Part II builds upon those concepts to develop a comprehensive methodology that can be applied to the design and manufacture of various types of gears and motion function generators. Part III discusses the design procedure itself. The authors supply a number of simplified design formulas, and, with the help of numerous examples, they clearly illustrate the capabilities of this versatile new approach to the integrated, interactive CAD/CAM of gear pairs and their production process. This groundbreaking book presents an entirely new and comprehensive methodology for the design, manufacture and evaluation of gears and virtually all other types of toothed motion/force transmission mechanisms. In it, the authors develop the kinematic relationships necessary to design and manufacture gear pairs and, with the help of the enclosed software, demonstrate how those relationships can utilize the design specification in an interactive PC environment to produce the design and manufacturing information and performance characteristics concurrently. A powerful new tool for evaluating and enhancing the performance of gear pairs and dealing with previously unexplained phenomena * An evolutionary leap in the design and manufacture of gear pairs provides a method for developing and manufacturing tools and gear forms which were previously difficult to conceptualize or implement * Design formulas and numerous real-world examples clearly illustrate the capabilities of this versatile new approach * Enclosed disk demonstrates to designers how to implement the described method into a fully integrated CAD and CAM process
Download or read book Mechanical Handling and Works Equipment written by and published by . This book was released on 1919 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Freedom in Machinery Volume 1 Introducing Screw Theory written by Jack Phillips and published by Cambridge University Press. This book was released on 1984-12-20 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does a machine run well by virtue of its accuracies, or its freedoms? This work presents an exciting, diagrammatic display of the hidden geometry of freedom and constraint. It bolsters the imaginative design of robots, but applies across all fields of machinery. The figures and their captions comprise alone a self-standing story, and this connects effectively with the rigorously argued text. The seamless combination of the two volumes (1984, 1990) renders the internal cross-referencing (forward and backward within the volumes) easier to look up. The appearance of this paperback is a clear testament to the work's ongoing readership. The term screw theory occurs throughout. This relates (after Ball) to the book's philosophy; and one might equally mention kinetostatics (after Federhofer). An all-pervading, counter-intuitive fact accordingly presents itself: while, analogously, angular velocity relates to force, linear velocity relates to couple. A direct consequence of Freedom in Machinery is a more recent book by the same author. Specifically titled General Spatial Involute Gearing and published in Germany (2003), it exemplifies the many ways in which Freedom in Machinery clarifies the enigmatic field of spatial mechanism. That field continuously expands with the current, continuous thrust of ordinary engineering practice.
Download or read book Kinematic Geometry of Gearing written by David B. Dooner and published by John Wiley & Sons. This book was released on 2012-04-09 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the first edition published in 1995 this new edition of Kinematic Geometry of Gearing has been extensively revised and updated with new and original material. This includes the methodology for general tooth forms, radius of torsure’, cylinder of osculation, and cylindroid of torsure; the author has also completely reworked the ‘3 laws of gearing’, the first law re-written to better parallel the existing ‘Law of Gearing” as pioneered by Leonard Euler, expanded from Euler’s original law to encompass non-circular gears and hypoid gears, the 2nd law of gearing describing a unique relation between gear sizes, and the 3rd law completely reworked from its original form to uniquely describe a limiting condition on curvature between gear teeth, with new relations for gear efficiency are presented based on the kinematics of general toothed wheels in mesh. There is also a completely new chapter on gear vibration load factor and impact. Progressing from the fundamentals of geometry to construction of gear geometry and application, Kinematic Geometry of Gearing presents a generalized approach for the integrated design and manufacture of gear pairs, cams and all other types of toothed/motion/force transmission mechanisms using computer implementation based on algebraic geometry.
