Download or read book Mechanics for the Growth of Bridged Cracks in Composite Materials written by L. N. McCartney and published by . This book was released on 1991 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics for the Growth of Bridged Cracks in Composite Materials written by LN. McCartney and published by . This book was released on 1992 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fracture mechanics analysis valid for long cracks is applied to three crack-bridging problems that arise in the composites area, namely, (1) matrix cracking in perfectly bonded unidirectional composites, (2) transverse cracking in perfectly bonded cross-ply laminates, and (3) matrix cracking in unidirectional composites in which frictional slip occurs at fiber matrix interfaces governed by the constant shear-stress shear-lag model of stress transfer.
Download or read book Cracks in composite materials written by George C. Sih and published by Springer. This book was released on 2012-03-01 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites offer great promise as light weight and strong materials for high performance structures. One of the major advantages of these materials as compared with metals is the basic way in which heterogeneity resist crack extension. In a fiber/matrix composite system, the fibers tend to cause cracks to form at closer spacing and delay the formation of a large crack. The enhancement of local failure such as fiber breaking, matrix cracking and interface debonding further reduces the energy level which might have otherwise reached the point of catastrophic failure. Even though substantial tests have been made on composite materials, little has been gained in the understanding and development of a predic tive procedure for composite failure. There are fundamental difficulties associated with incorporating the nonhomogeneous and anisotropic prop erties of the composite into the continuum mechanics analysis. Additional uncertainties arise from voids and defects that are introduced in the composite during manufacturing. Even a small quantity of mechanical imperfections can cause a marked influence on the composite strength. Moreover, the interface properties between the fibers and matrix or bonded laminae can also affect the load transmission characteristics significantly. It would be impossible to establish predictive procedures for composite failure unless realistic guidelines could be developed to control the manufacturing quality of composite systems.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Erian A. Armanios and published by ASTM International. This book was released on 1997 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Structural Integrity of Carbon Fiber Composites written by Peter W. R Beaumont and published by Springer. This book was released on 2016-11-26 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a diverse compilation of inter-disciplinary chapters on fundamental aspects of carbon fiber composite materials and multi-functional composite structures: including synthesis, characterization, and evaluation from the nano-structure to structure meters in length. The content and focus of contributions under the umbrella of structural integrity of composite materials embraces topics at the forefront of composite materials science and technology, the disciplines of mechanics, and development of a new predictive design methodology of the safe operation of engineering structures from cradle to grave. Multi-authored papers on multi-scale modelling of problems in material design and predicting the safe performance of engineering structure illustrate the inter-disciplinary nature of the subject. The book examines topics such as Stochastic micro-mechanics theory and application for advanced composite systems Construction of the evaluation process for structural integrity of material and structure Nano- and meso-mechanics modelling of structure evolution during the accumulation of damage Statistical meso-mechanics of composite materials Hierarchical analysis including "age-aware," high-fidelity simulation and virtual mechanical testing of composite structures right up to the point of failure. The volume is ideal for scientists, engineers, and students interested in carbon fiber composite materials, and other composite material systems.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1993 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Ronald B. Bucinell and published by ASTM International. This book was released on 1998 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties for Design of Composite Structures written by Neil McCartney and published by John Wiley & Sons. This book was released on 2022-06-07 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROPERTIES FOR DESIGN OF COMPOSITE STRUCTURES A comprehensive guide to analytical methods and source code to predict the behavior of undamaged and damaged composite materials In Properties for Design of Composite Structures: Theory and Implementation Using Software, distinguished researcher Dr. Neil McCartney delivers a unique and insightful approach to the development of predictive methods for the properties of undamaged and damaged laminated composite materials. The book focuses on presenting compact analytical formulae for several important effective properties—including mechanical, thermal, and electrical—that can be applied to a variety of reinforcement geometries. The author introduces a compact notation that enables an explicit treatment of laminate property determination, including the out-of-plane shear properties required for three-dimensional numerical simulations of structural features using finite and boundary element analyses. There is also a detailed consideration of ply crack closure and a useful study of the interrelationships between the effective thermoelastic constants of damaged laminates. The book also offers: A thorough introduction to the principles and formulae for homogenous materials and applications, including continuum and fracture concepts for homogeneous materials A comprehensive exploration of the properties of undamaged composites, including undamaged composite materials with multiple phases and the properties of a single undamaged lamina Practical discussions of the properties of damaged composites, including matrix cracking in UD composites and damaged laminates Consideration of effects of delamination, fatigue, and environmentally induced damage In-depth examinations of derivations of key results, including the analysis of bridged cracks and stress transfer mechanics for cross-ply and general symmetric laminates Perfect for composite design engineers in all types of material-supplying industries and manufacturing companies, Properties for Design of Composite Structures: Theory and Implementation Using Software will also earn a place in the libraries of undergraduate and graduate students in engineering, aerospace, and materials departments.
Download or read book Modeling Damage Fatigue and Failure of Composite Materials written by Ramesh Talreja and published by Elsevier. This book was released on 2023-09-29 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling Damage, Fatigue and Failure of Composite Materials, Second Edition provides the latest research in the field of composite materials, an area that has attracted a wealth of research, with significant interest in the areas of damage, fatigue, and failure. The book is fully updated, and is a comprehensive source of physics-based models for the analysis of progressive and critical failure phenomena in composite materials. It focuses on materials modeling while also reviewing treatments for analyzing failure in composite structures. Sections review damage development in composite materials such as generic damage and damage accumulation in textile composites and under multiaxial loading. Part Two focuses on the modeling of failure mechanisms in composite materials, with attention given to fiber/matrix cracking and debonding, compression failure, and delamination fracture. Final sections examine the modeling of damage and materials response in composite materials, including micro-level and multi-scale approaches, the failure analysis of composite materials and joints, and the applications of predictive failure models. Provides a comprehensive source of physics-based models for the analysis of progressive and critical failure phenomena in composite materials Assesses failure and life prediction in composite materials Discusses the applications of predictive failure models such as computational approaches to failure analysis Covers further developments in computational analyses and experimental techniques, along with new applications in aerospace, automotive, and energy (wind turbine blades) fields Covers delamination and thermoplastic-based composites
Download or read book Failure Criteria in Fibre Reinforced Polymer Composites written by M. Hinton and published by Elsevier. This book was released on 2004-08-31 with total page 1276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber reinforced polymer composites are an extremely broad and versatile class of material.Their high strength coupled with lightweight leads to their use wherever structural efficiency is at a premium. Applications can be found in aircraft, process plants, sporting goods and military equipment. However they are heterogeneous in construction and antisotropic, which makes making strength prediction extremely difficult especially compared to that of a metal. This book brings together the results of a 12year worldwide failure exercise encompassing 19 theories in a single volume. Each contributor describes their own theory and employs it to solve 14 challenging problems. The accuracy of predictions and the performance of the theories are assessed and recommendations made on the uses of the theories in engineering design. All the necessary information is provided for the methodology to be readily employed for validating and benchmarking new theories as they emerge. Brings together 19 failure theories, with many application examples. Compares the leading failure theories with one another and with experimental data Failure to apply these theories could result in potentially unsafe designs or over design.
Download or read book Concise Encyclopedia of Composite Materials written by Andreas Mortensen and published by Elsevier. This book was released on 2006-12-08 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concise Encyclopedia of Composite Materials draws its material from the award-winning Encyclopedia of Materials: Science and Technology, and includes updates and revisions not available in the original set. This customized collection of articles provides a handy reference for materials scientists and engineers with an interest in composite materials made from polymers, metals, ceramics, carbon, biocomposites, nanocomposites, wood, cement, fibers, etc. Brings together articles from the Encyclopedia of Materials: Science & Technology that focus on the essentials of composite materials, including recent updates Every article has been commissioned and written by an internationally recognized expert and provides a concise overview of a particular aspect of the field Enables rapid reference; extensive bibliographies, cross-referencing and indexes guide the user to the most relevant reading in the primary literature Covers areas of active research, such as biomaterials and porous materials
Download or read book Life Prediction Methodology for Titanium Matrix Composites written by W. Steven Johnson and published by ASTM International. This book was released on 1996 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the March 1994 symposium are organized into five sections that progress from basic understanding of mechanical damage mechanisms and environmental effects to life prediction methodology. Five papers discuss the interplay between interfacial strength, residual thermal stresses, an
Download or read book Fracture of Polymers Composites and Adhesives written by A Pavan and published by Elsevier. This book was released on 2000-10-10 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a selection of fully peer-reviewed papers which were presented at the 2nd ESIS TC4 Conference, held in Les Diablerets, Switzerland 13 - 15 September 1999. The meeting was designed to reflect the activities of the Committee over the last 15 years, and to plan future activities. The papers have been divided into four chapters under the headings of Composites, Elastic-Plastic Fracture, Adhesion, and Impact and General Fracture. These are convenient groupings, but there are many interactions between the areas, with the common theme of Fracture Mechanics underlying it all.
Download or read book Fracture Mechanics of Ceramics written by R.C. Bradt and published by Springer Science & Business Media. This book was released on 2010-01-11 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th International Symposium on fracture mechanics of ceramics was held in on the campus of the University of Houston, Houston, TX, USA, on February 25-28, 2003. With the natural maturing of the fields of structural ceramics, this symposium focused on nano-scale materials, composites, thin films and coatings as well as glass. The symposium also addressed new issues on fundamentals of fracture mechanics and contact mechanics, and a session on reliability and standardization.
Download or read book Mechanics of Composite Materials written by J.N. Reddy and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everyone involved with the mechanics of composite materials and structures must have come across the works of Dr. N.J. Pagano in their research. His research papers are among the most referenced of all existing literature in the field of mechanics of composite materials. This monograph makes available, in one volume, all Dr. Pagano's major technical papers. Most of the papers included in this volume have been published in the open literature, but there are a few exceptions -- a few key, unpublished reports have been included for continuity. The topics are: some basic studies of anisotropic behavior, exact solutions for elastic response, role of micromechanics, and some carbon--carbon spinoffs. The volume can be used as a reference book by researchers in academia, industry, and government laboratories, and it can be used as a reference text for a graduate course on the mechanics of composite materials.
Download or read book Delamination Behaviour of Composites written by Srinivasan Sridharan and published by Elsevier. This book was released on 2008-10-21 with total page 787 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such advantages as low weight compared to strength and toughness, laminated composites are now used in a wide range of applications. Their increasing use has underlined the need to understand their principal mode of failure, delamination. This important book reviews key research in understanding and preventing delamination. The first part of the book reviews general issues such as the role of fracture mechanics in understanding delamination, design issues and ways of testing delamination resistance. Part two describes techniques for detecting and characterising delamination such as piezoelectric sensors, the use of lamb waves and acoustic emission techniques. The next two sections of the book discuss ways of studying and modelling delamination behaviour. The final part of the book reviews research on delamination behaviour in particular conditions such as shell and sandwich structures, z-pin bridging and resin bonding. With its distinguished editor and international team of contributors, Delamination behaviour of composites is a standard reference for all those researching laminated composites and using them in such diverse applications as microelectronics, aerospace, marine, automotive and civil engineering. Reviews the role of fracture mechanics in understanding delamination, design issues and ways of testing delamination resistance Discuss ways of studying and modelling delamination behaviour A standard reference for all those researching laminated composites
