Download or read book Mechanics and Model Based Control of Smart Materials and Structures written by Hans Irschik and published by Springer Science & Business Media. This book was released on 2009-09-30 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics and model-based control are both rapidly expanding scientific fields and fundamental disciplines of mechatronics, sharing demanding mathematical and system-theoretic formulations and methods. The papers in this volume deal with smart materials, which allow the design and implementation of new types of actuator/sensor fields and networks. Main topics treated are fundamental studies on laminated, composite and functionally graded materials, thermal and piezoelectric actuation, active and passive damping, as well as vibrations and waves in smart structures. The book is based on the 1st Japanese-Austrian Workshop which took place in Linz in Fall 2008.

Download or read book Mechanics and Model Based Control of Advanced Engineering Systems written by Alexander K. Belyaev and published by Springer Science & Business Media. This book was released on 2013-12-12 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics and Model-Based Control of Advanced Engineering Systems collects 32 contributions presented at the International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines, which took place in St. Petersburg, Russia in July 2012. The workshop continued a series of international workshops, which started with a Japan-Austria Joint Workshop on Mechanics and Model Based Control of Smart Materials and Structures and a Russia-Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. In the present volume, 10 full-length papers based on presentations from Russia, 9 from Austria, 8 from Japan, 3 from Italy, one from Germany and one from Taiwan are included, which represent the state of the art in the field of mechanics and model based control, with particular emphasis on the application of advanced structures and machines.

Download or read book Dynamics and Control of Advanced Structures and Machines written by Hans Irschik and published by Springer Nature. This book was released on 2021-09-20 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected contributions to the 4th International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. The workshop, which was held in Linz, Austria in September 2019, continued a series of international workshops — the Japan-Austria Joint Workshop on Mechanics and Model Based Control of Smart Materials and Structures, the Russia-Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines, and the first three editions of the International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. The chapters cover a broad spectrum of topics in the field of Advanced Structures and Machines both with respect to theoretical aspects as well as applications to contemporary engineering problems.

Download or read book Adaptronics Smart Structures and Materials written by Johannes Michael Sinapius and published by Springer Nature. This book was released on 2020-08-24 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1980s, scientists have been researching adaptive structures for materials, for multifunctional elements or even for complete systems. Adaptronics (smart materials, smart structures, smart systems) is a field of distinct interdisciplinarity. The book therefore offers an interdisciplinary view of adaptronic systems, materials and functional elements and their applications. The subject matter integrates various engineering disciplines, from electrical engineering and information technology to manufacturing and control engineering, materials engineering and structural mechanics - to name but a few of the relevant subject areas. Starting from the basic principles and variants of adaptronic systems and functional materials, the textbook explains the different construction methods of functional elements. Building on this, readers learn how to apply this knowledge to active shape control, active vibration control and active vibroacoustics. For each of these topics the author presents current examples from research, discusses research results and future research questions. Each of the nine chapters closes with references to further literature. An index of the mathematical symbols used and a keyword index facilitate learning for readers.The book is aimed at Master's students in engineering courses such as mechanical engineering, aerospace engineering, mechatronics, automotive engineering and related courses. The book provides a comprehensive overview for industrial practitioners who want to familiarize themselves with the field of adaptronics and also serves as a reliable reference book.

Download or read book Dynamics and Control of Advanced Structures and Machines written by Valerii P. Matveenko and published by Springer. This book was released on 2019-03-08 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes 30 contributions from the 3rd International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines representing the frontiers in the mechanics of controlled machines and structures. The Workshop, held in Perm, Russia in September 2017 continued a series of international workshops, starting in with the Japan - Austria Joint Workshop on Mechanics and Model Based Control of Smart Materials and Structures, the Russia - Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines and the first two editions of the International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. The previous workshops took place in Linz, Austria in September 2008 and April 2010, in St. Petersburg, Russia in July 2012 and in Vienna, Austria in September 2015. The up-to-date contributions are authored by internationally re-known leading experts in dynamics and control representing a broad spectrum of topics in the field of Advanced Structures and Machines; both, with respect to theoretical aspects as well as applications to contemporary engineering problems.

Download or read book Multibody System Dynamics Robotics and Control written by Hubert Gattringer and published by Springer Science & Business Media. This book was released on 2013-01-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume contains 19 contributions by international experts in the field of multibody system dynamics, robotics and control. The book aims to bridge the gap between the modeling of mechanical systems by means of multibody dynamics formulations and robotics. In the classical approach, a multibody dynamics model contains a very high level of detail, however, the application of such models to robotics or control is usually limited. The papers aim to connect the different scientific communities in multibody dynamics, robotics and control. Main topics are flexible multibody systems, humanoid robots, elastic robots, nonlinear control, optimal path planning, and identification.

Download or read book Smart Materials in Structural Health Monitoring Control and Biomechanics written by Chee-Kiong Soh and published by Springer Science & Business Media. This book was released on 2012-12-03 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Smart Materials in Structural Health Monitoring, Control and Biomechanics" presents the latest developments in structural health monitoring, vibration control and biomechanics using smart materials. The book mainly focuses on piezoelectric, fibre optic and ionic polymer metal composite materials. It introduces concepts from the very basics and leads to advanced modelling (analytical/ numerical), practical aspects (including software/ hardware issues) and case studies spanning civil, mechanical and aerospace structures, including bridges, rocks and underground structures. This book is intended for practicing engineers, researchers from academic and R&D institutions and postgraduate students in the fields of smart materials and structures, structural health monitoring, vibration control and biomedical engineering. Professor Chee-Kiong Soh and Associate Professor Yaowen Yang both work at the School of Civil and Environmental Engineering, Nanyang Technological University, Singapore. Dr. Suresh Bhalla is an Associate Professor at the Department of Civil Engineering, Indian Institute of Technology Delhi, India.

Download or read book Progress in Smart Materials and Structures written by Peter L. Reece and published by Nova Publishers. This book was released on 2007 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Smart" materials respond to environmental stimuli with particular changes in some variables. For that reason they are often also called responsive materials. Depending on changes in some external conditions, "smart" materials change either their properties (mechanical, electrical, appearance), their structure or composition, or their functions. Mostly, "smart" materials are embedded in systems whose inherent properties can be favourably changed to meet performance needs. Smart materials and structures have widespread applications in: 1. Materials science: composites, ceramics, processing science, interface science, sensor/actuator materials, chiral materials, conducting and chiral polymers, electrochromic materials, liquid crystals, molecular-level smart materials, biomaterials. 2. Sensing and actuation: electromagnetic, acoustic, chemical and mechanical sensing and actuation, single-measurand sensors, multiplexed multimeasurand distributed sensors and actuators, sensor/actuator signal processing, compatibility of sensors and actuators with conventional and advanced materials, smart sensors for materials and composites processing. 3. Optics and electromagnetics: optical fibre technology, active and adaptive optical systems and components, tuneable high-dielectric phase shifters, tuneable surface control. 4. Structures: smart skins for drag and turbulence control, other applications in aerospace/hydrospace structures, civil infrastructures, transportation vehicles, manufacturing equipment, repairability and maintainability. 5. Control: structural acoustic control, distributed control, analogue and digital feedback control, real-time implementation, adaptive structure stability, damage implications for structural control. 6. Information processing: neural networks, data processing, data visualisation and reliability. This book presents leading research from around the globe in this field.

Download or read book Fifth European Workshop on Structural Health Monitoring 2010 written by Fabio Casciati and published by DEStech Publications, Inc. This book was released on 2010 with total page 1425 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Thermal Stress Analysis of Smart Materials and Structures written by Zengtao Chen and published by Springer Nature. This book was released on 2019-09-03 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first single volume monograph that systematically summarizes the recent progress in using non-Fourier heat conduction theories to deal with the multiphysical behaviour of smart materials and structures. The book contains six chapters and starts with a brief introduction to Fourier and non-Fourier heat conduction theories. Non-Fourier heat conduction theories include Cattaneo-Vernotte, dual-phase-lag (DPL), three-phase-lag (TPL), fractional phase-lag, and nonlocal phase-lag heat theories. Then, the fundamentals of thermal wave characteristics are introduced through reviewing the methods for solving non-Fourier heat conduction theories and by presenting transient heat transport in representative homogeneous and advanced heterogeneous materials. The book provides the fundamentals of smart materials and structures, including the background, application, and governing equations. In particular, functionally-graded smart structures made of piezoelectric, piezomagnetic, and magnetoelectroelastic materials are introduced as they represent the recent development in the industry. A series of uncoupled thermal stress analyses on one-dimensional structures are also included. The volume ends with coupled thermal stress analyses of one-dimensional homogenous and heterogeneous smart piezoelectric structures considering different coupled thermopiezoelectric theories. Last but not least, fracture behavior of smart structures under thermal disturbance is investigated and the authors propose directions for future research on the topic of multiphysical analysis of smart materials.

Download or read book Computational Engineering written by Günter Hofstetter and published by Springer. This book was released on 2014-05-15 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents state-of-the-art works in computational engineering. Focus is on mathematical modeling, numerical simulation, experimental validation and visualization in engineering sciences. In particular, the following topics are presented: constitutive models and their implementation into finite element codes, numerical models in nonlinear elasto-dynamics including seismic excitations, multiphase models in structural engineering and multiscale models of materials systems, sensitivity and reliability analysis of engineering structures, the application of scientific computing in urban water management and hydraulic engineering, and the application of genetic algorithms for the registration of laser scanner point clouds.

Download or read book Optimization Methods for Structural Engineering written by Ishaan R. Kale and published by Springer Nature. This book was released on 2023-06-06 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed book focuses on optimization methods inspired by nature such as Harmony Search Algorithm, Drosophila Food-Search Algorithm, Cohort intelligence algorithm and its variations, fuzzy logic along with their hybridization variants. It also focuses on multi-objective optimization algorithms such as Non-Dominated Sorting Genetic Algorithm, Particle Swarm Optimization, Evolutionary Algorithm, Pareto Envelope Selection Algorithm, and Strength Pareto Evolutionary Algorithm. The content focuses on topics such as the optimal design of truss systems with various applications, the design and simulation of quarter car systems for comfort design, the road handling design and a balanced system, and topology optimization of 2-dimensional and 3-dimensional structure in linear elasticity, plasticity and fracture mechanics among others. This book is a useful reference for those in academia and industry.

Download or read book Smart Materials Structures and Mathematical Issues written by Craig A. Rogers and published by CRC Press. This book was released on 1989-08-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected from a US Army Research Office Workshop, this collection of papers describes applications in electrorheological fluids, sensor/actuator films, self-adaptive structures, and shape-memory materials. Smart materials, a new class of materials of strategic and economic importance, are viewed as providing new opportunities in polymer materials, ceramics, electronic materials, metals, and composite materials. No index. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Proceedings of the ASME Conference on Smart Materials Adaptive Structures and Intelligent Systems 2010 Active materials mechanics and behavior Modeling simulation and control Bio inspired smart materials and structures written by and published by . This book was released on 2010 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Smart Structures and Materials written by Aurelio L. Araujo and published by Springer. This book was released on 2016-12-20 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work was compiled with expanded and reviewed contributions from the 7th ECCOMAS Thematic Conference on Smart Structures and Materials, that was held from 3 to 6 June 2015 at Ponta Delgada, Azores, Portugal. The Conference provided a comprehensive forum for discussing the current state of the art in the field as well as generating inspiration for future ideas specifically on a multidisciplinary level. The scope of the Conference included topics related to the following areas: Fundamentals of smart materials and structures; Modeling/formulation and characterization of smart actuators, sensors and smart material systems; Trends and developments in diverse areas such as material science including composite materials, intelligent hydrogels, interfacial phenomena, phase boundaries and boundary layers of phase boundaries, control, micro- and nano-systems, electronics, etc. to be considered for smart systems; Comparative evaluation of different smart actuators and sensors; Analysis of structural concepts and designs in terms of their adaptability to smart technologies; Design and development of smart structures and systems; Biomimetic phenomena and their inspiration in engineering; Fabrication and testing of smart structures and systems; Applications of smart materials, structures and related technology; Smart robots; Morphing wings and smart aircrafts; Artificial muscles and biomedical applications; Smart structures in mechatronics; and Energy harvesting.

Download or read book Smart Materials and Structures written by Peter L. Reece and published by Nova Publishers. This book was released on 2007 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Smart" materials respond to environmental stimuli with particular changes in some variables. For that reason they are often also called responsive materials. Depending on changes in some external conditions, "smart" materials change either their properties (mechanical, electrical, appearance), their structure or composition, or their functions. Mostly, "smart" materials are embedded in systems whose inherent properties can be favourably changed to meet performance needs. Smart materials and structures have widespread applications in: 1. Materials science: composites, ceramics, processing science, interface science, sensor/actuator materials, chiral materials, conducting and chiral polymers, electrochromic materials, liquid crystals, molecular-level smart materials, biomaterials. 2. Sensing and actuation: electromagnetic, acoustic, chemical and mechanical sensing and actuation, single-measurand sensors, multiplexed multimeasurand distributed sensors and actuators, sensor/actuator signal processing, compatibility of sensors and actuators with conventional and advanced materials, smart sensors for materials and composites processing. 3. Optics and electromagnetics: optical fibre technology, active and adaptive optical systems and components, tunable high-dielectric phase shifters, tunable surface control. 4. Structures: smart skins for drag and turbulence control, other applications in aerospace/hydrospace structures, civil infrastructures, transportation vehicles, manufacturing equipment, repairability and maintainability. 5. Control: structural acoustic control, distributed control, analogue and digital feedback control, real-time implementation, adaptive structure stability, damage implications for structural control. 6. Information processing: neural networks, data processing, data visualisation and reliability. This book presents leading new research from around the globe in this field.

Download or read book Dynamics of Smart Systems and Structures written by Vicente Lopes Junior and published by Springer. This book was released on 2016-06-03 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a team of experts that has been working together for several years in the context of a research network involving international institutions, this book brings several applications related to smart material systems such as vibration and noise control, structural health monitoring, energy harvesting and shape memory alloys. Furthermore, this book also provides basic knowledge on the fundamentals of smart material systems and structures. Consequently, the present title serves as an important resource for advanced undergraduate and graduate students. In addition, it serves as a guide for engineers and scientists working with smart structures and materials both with an application and basic research perspective. Smart material systems and structures represent a new paradigm which is increasing the capabilities of engineering systems. Adaptability and versatility are some important aspects related to such systems. In brief, research on smart materials is characterized by synergistically combining different physical features, such as mechanical, electrical, chemical, and magnetic. As a result, smart material technologies have a huge potential to enhance the performance of engineering structures opening unlimited opportunities to innovation and economic benefits.