Download or read book Mechanics and Chemistry in Lubrication written by A. Dorinson and published by Elsevier. This book was released on 1985-08-01 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although it is widely recognized that friction, wear and lubrication are linked together in a single interdisciplinary complex of scientific learning and technological practice, fragmented and specialized approaches still predominate. In this book, the authors examine lubrication from an interdisciplinary viewpoint. They demonstrate that once the treatment of lubrication is released from the confines of the fluid film concept, this interdisciplinary approach comes into full play. Tribological behavior in relation to lubrication is then examined from two major points of view: one is mechanical, not only with respect to the properties and behavior of the lubricant but also of the surfaces being lubricated. The other is chemical and encompasses the chemistry of the lubricant, the surfaces and the ambient surroundings. It is in the emphasis on the interaction of the basic mechanical and chemical processes in lubrication that this book differs from conventional treatments.
Download or read book Mechanics and Chemistry in Lubrication written by A. Dorinson and published by . This book was released on 1985 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemistry and Technology of Lubricants written by R. M. Mortier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use oflubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricatingpractice has precededan understandingofthescientificprinciples. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the under standing of lubricant phenomena will continue to be developed at a mol ecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in machinery, and continuing improvements to lubricant performanceand life-time. More recently, there has been an increased understanding ofthe chemical aspects of lubrication, which has complemented the knowledge and under standing gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who requirea more fundamental understanding oflubricants.
Download or read book Chemistry and Technology of Lubricants written by Roy M. Mortier and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Chemistry and Technology of Lubricants" describes the chemistry and technology of base oils, additives and applications of liquid lubricants. This Third Edition reflects how the chemistry and technology of lubricants has developed since the First Edition was published in 1992. The acceleration of performance development in the past 35 years has been as significant as in the previous century: Refinery processes have become more precise in defining the physical and chemical properties of higher quality mineral base oils. New and existing additives have improved performance through enhanced understanding of their action. Specification and testing of lubricants has become more focused and rigorous. "Chemistry and Technology of Lubricants" is directed principally at those working in the lubricants industry as well as individuals working within academia seeking a chemist's viewpoint of lubrication. It is also of value to engineers and technologists requiring a more fundamental understanding of the subject.
Download or read book Chemistry and Technology of Lubricants written by Roy M. Mortier and published by . This book was released on 2014-09-01 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lubricants written by Marika Torbacke and published by John Wiley & Sons. This book was released on 2014-05-12 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Those working with tribology often have a background in mechanical engineering, while people working with lubricant development have a chemistry/chemical engineering background. This means they have a tradition of approaching problems in different ways. Today’s product development puts higher demands on timing and quality, requiring collaboration between people with different backgrounds. However, they can lack understanding of each other’s challenges as well as a common language, and so this book aims to bridge the gap between these two areas. Lubricants: Introduction to Properties and Performance provides an easy to understand overview of tribology and lubricant chemistry. The first part of the book is theoretical and provides an introduction to tribological contact, friction, wear and lubrication, as well as the basic concepts regarding properties and the most commonly made analyses on lubricants. Base fluids and their properties and common additives used in lubricants are also covered. The second part of the book is hands-on and introduces the reader to the actual formulations and the evaluation of their performance. Different applications and their corresponding lubricant formulations are considered and tribological test methods are discussed. Finally used oil characterisation and surface characterisation are covered which give the reader an introduction to different methods of characterising used oils and surfaces, respectively. Key features: Combines chemistry and tribology of lubricants into one unified approach Covers the fundamental theory, describing lubricant properties as well as base fluids and additives Contains practical information on the formulations of lubricants and evaluates their performance Considers applications of lubricants in hydraulics, gears and combustion engines Lubricants: Introduction to Properties and Performance is a comprehensive reference for industry practitioners (tribologists, lubricant technicians, and lubricant chemists, etc) and is also an excellent source of information for graduate and undergraduate students.
Download or read book Friction and Lubrication written by William Morris Davis and published by . This book was released on 1904 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lubricants and Lubrication 2 Volume Set written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: “Contains something for everyone involved in lubricant technology” — Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
Download or read book Lubricant Additives written by Leslie R. Rudnick and published by CRC Press. This book was released on 2003-01-29 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text details the design of cost-effective, environmentally friendly lubricant additive technologies and components for the automotive, industrial, manufacturing, food, and aerospace industries. Presenting methods to improve the performance and stability of lubricants, protect metal surfaces against wear, and to control deposits and contaminant
Download or read book Chemistry and Technology of Lubricants written by Roy M. Mortier and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricating practice has preceded an understanding of the scientific principles. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the understanding of lubricant phenomena will continue to be developed at a molecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in and continuing improvements to lubricant performance and machinery, life-time. More recently, there has been an increased understanding of the chemical aspects of lubrication, which has complemented the knowledge and understanding gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who require a more fundamental understanding of lubricants.
Download or read book Friction and Lubrication written by William Morris Davis and published by Forgotten Books. This book was released on 2015-06-25 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Friction and Lubrication: A Hand-Book for Engineers, Mechanics, Superintendents and Managers The subject of lubrication and lubricants, from a practical, or rather a mechanical point of view, has not received the attention at the hands of experienced writers that it deserves. A few books have been written on lubricants by chemists, treating these subjects wholly from a chemical standpoint; these are of great value to those who have a knowledge of chemistry, but have little of value to the mechanical man. In these days of rigid economies, and close attention to details, the engineer or manager who desires to attain to the greatest efficiency and economy in the operation of the machinery in his charge must consider closely the cost, the quality, and the best methods of applying lubricants, as well as of fuel and the other elements which enter into operation of a steam plant. The author, an engineer himself, has been for the past ten years in a position to make a close study of lubrication on many kinds of engines and machinery, and under all sorts of conditions. In presenting this book to the notice of those who have to do with the use of lubricants, while he has not endeavored to exploit any new theories, he has kept in mind the fact that engineers, managers and mechanics are busy men, and he has therefore tried to present the matter in a plain concise way, that will be readily understood by readers and be of practical value in their every day work. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Chemistry and Technology of Lubricants written by R. M. Mortier and published by Springer. This book was released on 2012-12-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use oflubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricatingpractice has preceded an understanding ofthe scientific principles. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the under standing of lubricant phenomena will continue to be developed at a mol ecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in machinery, and continuing improvements to lubricant performanceand life-time. More recently, there has been an increased understanding of the chemical aspects of lubrication, which has complemented the knowledge and under standing gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who require a more fundamental understanding oflubricants.
Download or read book Process Chemistry of Lubricant Base Stocks written by Thomas R. Lynch and published by CRC Press. This book was released on 2007-09-21 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in processing methods are not only improving the quality and yield of lubricant base stocks, they are also reducing the dependence on more expensive crude oil starting materials. Process Chemistry of Lubricant Base Stocks provides a comprehensive understanding of the chemistry behind the processes involved in petroleum base stock p
Download or read book Lubricants and Related Products written by Dieter Klamann and published by Wiley-VCH. This book was released on 1984-03-19 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieter Klamann Lubricants and Related Products Improved engine performance and new applications have necessitated considerable advances and developments in lubricant technology. Mineral oils without additives are rarely sufficient as lubricants for modern equipment. Rather, synthetic base oils have gained importance because their properties and behaviour can be tailored to suit their applications. Tribology and tribotechnology have become scientific disciplines of their own. They deal with all aspects of friction, wear and lubrication and are based on physics, chemistry and mechanical engineering. Their economic importance follows from the estimate that between four and five percent of the total energy consumed could be saved by better lubrication. It is the purpose of this book to present the information that is needed in order to understand the essentials of lubrication and to select the most suitable lubricant in any given case. All types of lubricants and additives are described, and methods for predicting their behaviour on the basis of physical and chemical data are reported. Moreover, standards and specifications from the major industrialized countries are reviewed and made "compatible" with the aid of conversion tables
Download or read book Modeling of Chemical Wear written by A. Sethuramiah and published by Elsevier. This book was released on 2015-10-19 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling of Chemical Wear is a one-stop resource for students, researchers and professionals seeking quick and effective tribological evaluations of environmentally friendly and energy efficient products. This book considers optimizing additive combinations by proper methodology, bridging the gap between theory and practice. It defines effective approaches to evaluate antiwear chemical additives commonly used in industry, enhancing the mapping ability of their performance to reduce the extent of full scale evaluations. Provides full coverage of tribology in four concise chapters, including lubricants and additives and up-and-coming nano-level tribology Offers effective empirical modelling of chemical wear, along with computer programs relevant to industry standards to help you improve your test methods Outlines effective methodology for optimization of additive packages, relevant to the present search for eco-friendly combinations
Download or read book Lubricants and Lubrication written by Theo Mang and published by Wiley-VCH. This book was released on 2007-04-09 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely revised second edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria.
Download or read book Lubricant Additives written by Leslie R. Rudnick and published by CRC Press. This book was released on 2009-04-20 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cost, environmental, and performance issues coupled with legislative changes, new engine oil requirements, and technology development for exploration of space and the oceans are changing the lubrication additive market. Reflecting how the need for new applications drives the development of new lubricant additives, Lubricant Additives: Chemistry and Applications, Second Edition presents methods to: Improve the performance, efficiency, and stability of lubricants Protect metal surfaces from wear Select lubricant additives for the food processing industry Select the most appropriate ashless additives Avoid microbial degradation of lubricants Lower toxicity And describes: Standard lubricant testing methods and product specifications Mechanisms and benefits of specific types of lubricant additives Recent industry trends Up-to-Date Coverage of Lubricant Additive Chemistry and Technology Addressing new trends in various industrial sectors and improvements in technology, this second edition provides detailed reviews of additives used in lubricant formulations, their chemistry, mechanisms of action, and trends for major areas of application. It explores the design of cost-effective, environmentally friendly lubricant technologies and lubricants for automotive, industrial, manufacturing, aerospace, and food-processing applications. An extensive list of online industry resources is available for download at crcpress.com.
