Download or read book Mechanical Working and Steel Processing VI written by John W. Frame and published by . This book was released on 1969 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermo Mechanical Processing of Metallic Materials written by Bert Verlinden and published by Elsevier. This book was released on 2007-06-07 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-Mechanical Processing of Metallic Materials describes the science and technology behind modern thermo-mechanical processing (TMP), including detailed descriptions of successful examples of its application in the industry. This graduate-level introductory resource aims to fill the gap between two scientific approaches and illustrate their successful linkage by the use of suitable modern case studies. The book is divided into three key sections focusing on the basics of metallic materials processing. The first section covers the microstructural science base of the subject, including the microstructure determined mechanical properties of metals. The second section deals with the current mechanical technology of plastic forming of metals. The concluding section demonstrates the interaction of the first two disciplines in a series of case studies of successful current TMP processing and looks ahead to possible new developments in the field. This text is designed for use by graduate students coming into the field, for a graduate course textbook, and for Materials and Mechanical Engineers working in this area in the industry. * Covers both physical metallurgy and metals processing* Links basic science to real everyday applications* Written by four internationally-known experts in the field
Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Download or read book Mechanical Working of Metals written by John Noel Harris and published by Elsevier. This book was released on 2014-05-20 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Working of Metals: Theory and Practice provides a comprehensive examination of the stress–strain relationships involved in the principal methods of shaping materials by mechanical working. This book discusses the various processing equipment and its application. Organized into seven chapters, this book begins with an overview of the metals utilized on a substantial scale for construction and engineering purposes. This text then examines the behavior of metal under compressive stress, which can be seen from an analysis of what happens when a cylindrical sample is compressed between two platens. Other chapters consider the effect of mechanical work on the structure and macro-properties of metals. This book discusses as well the classification of the processes used for mechanical working. The final chapter deals with the techniques of manufacturing tin cans, which are ideal packaging for food and beverages. This book is a valuable resource for mechanical engineers and metallurgists.
Download or read book Information Circular written by and published by . This book was released on 1984 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalog of Copyright Entries Third Series written by Library of Congress. Copyright Office and published by Copyright Office, Library of Congress. This book was released on 1972 with total page 1602 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Friction Stir Welding and Processing VI written by Rajiv S. Mishra and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction stir welding has seen significant growth in both technology implementation and scientific exploration. This book covers all aspects of friction stir welding and processing, from fundamentals to design and applications. It also includes an update on the current research issues in the field of friction stir welding and a guide for further research.
Download or read book Mechanical Properties and Working of Metals and Alloys written by Amit Bhaduri and published by Springer. This book was released on 2018-05-12 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.
Download or read book Metal Forming Interrelation Between Theory and Practice written by A. L. Hoffmanner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: On October 21 and 22, 1970, the Shaping and Forming Committee, Institute of Metals Division, The Metallurgical Society of AlME, held a Conference on "The Relation Between Theory and Practice it). Metal Forming" at the Sheraton-Cleveland Hotel during the Fall Meeting of AIME in Cleveland, Ohio. This conference was devoted to recent applications of theory to metal forming to establish a milestone in the current ability to predict phenomena during deformation processing and, thereby, demonstrate the utility of theory for process design. The papers were selected by first requesting presentations of relevant recent work from 68 recognized authorities in metal forming which resulted in 17 papers. A sub sequent call for papers resulted in the submission of 19 abstracts from which 4 papers were selected. The selection criteria required that the paper coupled theory with practice, and that the work was recent, unpublished and worthy of permanent record. The selection was performed by the Conference Chairman. The papers in this volume have been organized in accordance with the following subjects: Extrusion Drawing and Sheet Metal Forming Forming Loads and Friction Workability These papers appear to assess the salient recent applications of mechanics to the deformation processing of alloys at the present time, i. e. , circa 1970, A, L. Hoffmanner Conference Chairman May, 1970 vii LIST OF CONTRIBUTORS Taylan Altan, Metalworking Division, Columbus Laboratories, Battelle Memorial Institute, Columbus, Ohio W. A.
Download or read book Finite Element Analysis written by David Moratal and published by BoD – Books on Demand. This book was released on 2010-08-17 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element analysis is an engineering method for the numerical analysis of complex structures. This book provides a bird's eye view on this very broad matter through 27 original and innovative research studies exhibiting various investigation directions. Through its chapters the reader will have access to works related to Biomedical Engineering, Materials Engineering, Process Analysis and Civil Engineering. The text is addressed not only to researchers, but also to professional engineers, engineering lecturers and students seeking to gain a better understanding of where Finite Element Analysis stands today.
Download or read book Advancement of Intelligent Production written by E. Usui and published by Elsevier. This book was released on 2016-07-29 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: As we move towards the 21st century, industries are compelled to turn from "high productivity and high precision" to "more intelligent and more human-oriented technology". This volume presents the existing state of the art of production/precision engineering and illuminates areas in which future work may proceed.
Download or read book GATE 2020 Mechanical Engineering Guide with 10 Practice Sets 6 in Book 4 Online 7th edition written by Deepak Pathak and published by Disha Publications. This book was released on 2019-05-30 with total page 1125 pages. Available in PDF, EPUB and Kindle. Book excerpt: • ‘GATE Mechanical Engineering Guide 2020 with 10 Practice Sets - 6 in Book + 4 Online Tests - 7th edition’ for GATE exam contains exhaustive theory, past year questions, practice problems and Mock Tests. • Covers past 15 years questions. • Exhaustive EXERCISE containing 100-150 questions in each chapter. In all contains around 5300 MCQs. • Solutions provided for each question in detail. • The book provides 10 Practice Sets - 6 in Book + 4 Online Tests designed exactly on the latest pattern of GATE exam.
Download or read book Strength of Materials written by Hector Jaramillo S. and published by BoD – Books on Demand. This book was released on 2020-03-25 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: In materials, their strength is the ability to bear an applied load before their failure. In this direction, the Strength of Materials studies the stresses and deformations that happen in materials as an outcome of loads acting on them. The book contains eleven peer-reviewed chapters organized into two sections. Section 1 is focused on the strength of metals and composites materials, in other words on traditional materials used in engineering projects. Section 2 contains chapters on sustainable materials or non-conventional materials. We sincerely hope that you enjoy this book and the contents will help in the dissemination of knowledge to researchers and students working with materials and their applications.
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by George E. Totten and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book The Metallurgy of Zinc Coated Steels written by Arnold Marder and published by Elsevier. This book was released on 2023-02-22 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Metallurgy of Zinc Coated Steels provides a comprehensive overview of the science and engineering of zinc coatings. Beginning with a look at new innovations made in the hot-dip coating methods (CGL), the book goes on to discuss phase equilibria, Zn bath phenomena and overlay coating formations. Both processing methods and controls are covered, as well as corrosion resistance and coating product properties. The book concludes with a discussion of future opportunities for zinc coatings. This book is a vital resource for both individuals new to this area while also serving as a handbook for users and producers of zinc coatings. - Presents a basic understanding of the science and engineering behind zinc coatings with a thorough and cutting-edge look at their processing methods, controls, properties, and applications - Discusses corrosion resistance, overlay coating formation, heat treatment, interface reactions, deposition processes, and more - Covers real-world applications of these coatings
Download or read book Steel Castings Handbook 6th Edition written by Malcolm Blair and published by ASM International. This book was released on 1995-01-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
