Download or read book Mechanical Vibration and Shock Analysis Mechanical Shock written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 2: Mechanical Shock This volume considers the shock response spectrum, its various definitions, its properties, and the assumptions involved in its calculation. In developing the practical application of these concepts, the shock shapes or profiles most often used in test facilities are presented, together with their characteristics and indications of how to establish test configurations comparable with those of the real-world, measured environment. Following this analysis there is a case study of how to meet these specifications using standard laboratory equipment, shock machines, electrodynamic exciters driven by a time signal or a response spectrum. Discussion of the limitations, advantages and disadvantages of each method is presented. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book Mechanical Vibration and Shock Analysis Sinusoidal Vibration written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 1: Sinusoidal Vibration The relative and absolute response of a mechanical system with a single degree of freedom is considered for arbitrary excitation, and its transfer function defined in various forms. The characteristics of sinusoidal vibration are examined in the context both of the real world and of laboratory tests, and for both transient and steady state response of the single-degree-of-freedom system. Viscous damping and then nonlinear damping are considered. The various types of swept sine perturbations and their properties are described and, for the one-degree-of-freedom system, the consequence of an inappropriate choice of sweep rate are considered. From the latter, rules governing the choice of suitable sweep rates are developed. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book Mechanical Vibration and Shock Analysis Mechanical Shock written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 2: Mechanical Shock This volume considers the shock response spectrum, its various definitions, its properties, and the assumptions involved in its calculation. In developing the practical application of these concepts, the shock shapes or profiles most often used in test facilities are presented, together with their characteristics and indications of how to establish test configurations comparable with those of the real-world, measured environment. Following this analysis there is a case study of how to meet these specifications using standard laboratory equipment, shock machines, electrodynamic exciters driven by a time signal or a response spectrum. Discussion of the limitations, advantages and disadvantages of each method is presented. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book Mechanical Vibration and Shock Analysis Fatigue Damage written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 4: Fatigue Damage Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also employed for a specification representing the effects produced by the set of vibrations imposed in a real-world environment. In this volume, which is devoted to the calculation of fatigue damage, the author explores the various hypotheses and models used to describe the behavior of material suffering fatigue and the laws of fatigue accumulation. He also considers the methods of counting response peaks, which are used to establish a histogram when it is impossible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book Fatigue Damage written by Christi Lalanne and published by CRC Press. This book was released on 2002-03-29 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Series: This important new series of five volumes has been written with both the professional engineers and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and crucially important areas of mechanical engineering, from both the theoretical and practical standpoints. As all products need to be designed to withstand the environmental conditions to which they are likely to be subjected, prototypes must be verified by calculation and laboratory tests, the latter according to specifications from national or international standards. The concept of tailoring the product to its environment has gradually developed whereby, from the very start of a design project, through the to the standards specifications and testing procedures on th e prototype, the real environment in which the product being tested will be functioning is taken into account. The five volumes of Mechanical Shock and Vibration cover all the issues that need to be addressed in this area of mechanical engineering. The theoretical analyses are placed in the context of the real world and of laboratory tests - essential for the development of specifications. Volume IV: Fatigue Damage Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also employed for a specifciation representing the effects produced by the set of vibrations imposed in a real environment. In this volume, which is devoted to the calculation of fatigue damage, the author explores the hypotheses adopted to describe the behavior of material suffering fatigue and the laws of fatigue accumulation. He also considers the methods of counting the response peaks, which are used to establish the histogram when it is impossible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested.
Download or read book Mechanical Vibration and Shock Analysis Random Vibration written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 3: Random Vibration The vast majority of vibrations encountered in a real-world environment are random in nature. Such vibrations are intrinsically complicated, but this volume describes a process enabling the simplification of the analysis required, and the analysis of the signal in the frequency domain. Power spectrum density is also defined, with the requisite precautions to be taken in its calculation described together with the processes (windowing, overlapping) necessary for improved results. A further complementary method, the analysis of statistical properties of the time signal, is described. This enables the distribution law of the maxima of a random Gaussian signal to be determined and simplifies calculation of fatigue damage to be made by the avoidance of the direct counting of peaks. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book Mechanical Shock written by Christi Lalanne and published by CRC Press. This book was released on 2020-01-16 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concepts in this book will provide a comprehensive overview of the current state for a broad range of nitride semiconductor devices, as well as a detailed introduction to selected materials and processing issues of general relevance for these applications. This compilation is very timely given the level of interest and the current stage of research in nitride semiconductor materials and device applications. This volume consists of chapters written by a number of leading researchers in nitride materials and device technology addressing Ohmic and Schottky contacts, AIGalnN multiple quantum well laser diodes, nitride vertical cavity emitting lasers, and ultraviolet photodetectors. This unique volume provides a comprehensive review and introduction to application and devices based on GaN and related compounds for newcomers to the field and stimulus to further advances for experienced researchers.
Download or read book Mechanical Vibration and Shock Analysis Random Vibration written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2014-04-16 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of vibrations encountered in the real environment are random in nature. Such vibrations are intrinsically complicated and this volume describes the process that enables us to simplify the required analysis, along with the analysis of the signal in the frequency domain. The power spectrum density is also defined, together with the requisite precautions to be taken in its calculations as well as the processes (windowing, overlapping) necessary to obtain improved results. An additional complementary method – the analysis of statistical properties of the time signal – is also described. This enables the distribution law of the maxima of a random Gaussian signal to be determined and simplifies the calculation of fatigue damage by avoiding direct peak counting.
Download or read book The Science and Engineering of Mechanical Shock written by Carl Sisemore and published by Springer. This book was released on 2019-05-08 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fills a unique position in the literature as a dedicated mechanical shock analysis book. Because shock events can be extremely damaging, mechanical shock is an important topic for engineers to understand. This book provides the reader with the tools needed to quantitatively describe shock environments and their damage potential on aerospace, civil, naval and mechanical systems. The authors include the relevant history of how shock testing and analysis came to its current state and a discussion of the different types of shock environments typically experienced by systems. Development of single-degree-of-freedom theory and the theory of the shock response spectra are covered, consistent with treatment of shock spectra theory in the literature. What is unique is the expansion to other types of spectra including less common types of shock spectra and energy spectra methods using fundamental principles of structural dynamics. In addition, non-spectral methods are discussed with their applications. Non-spectral methods are almost completely absent from the current books on mechanical shock. Multi-degree-of-freedom shock spectra and multi-degree-of-freedom testing are discussed and the theory is developed. Addressing an emerging field for laboratory shock testing, the authors bring together information currently available only in journals and conference publications. The volume is ideal for engineers, structural designers, and structural materials fabricators needing a foundation to practically analyze shock environments and understand their role in structural design.
Download or read book Mechanical vibration and shock measurements written by Jens Trampe Broch and published by . This book was released on 1984 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration and Shock Handbook written by Clarence W. de Silva and published by CRC Press. This book was released on 2005-06-27 with total page 1837 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every so often, a reference book appears that stands apart from all others, destined to become the definitive work in its field. The Vibration and Shock Handbook is just such a reference. From its ambitious scope to its impressive list of contributors, this handbook delivers all of the techniques, tools, instrumentation, and data needed to model, analyze, monitor, modify, and control vibration, shock, noise, and acoustics. Providing convenient, thorough, up-to-date, and authoritative coverage, the editor summarizes important and complex concepts and results into “snapshot” windows to make quick access to this critical information even easier. The Handbook’s nine sections encompass: fundamentals and analytical techniques; computer techniques, tools, and signal analysis; shock and vibration methodologies; instrumentation and testing; vibration suppression, damping, and control; monitoring and diagnosis; seismic vibration and related regulatory issues; system design, application, and control implementation; and acoustics and noise suppression. The book also features an extensive glossary and convenient cross-referencing, plus references at the end of each chapter. Brimming with illustrations, equations, examples, and case studies, the Vibration and Shock Handbook is the most extensive, practical, and comprehensive reference in the field. It is a must-have for anyone, beginner or expert, who is serious about investigating and controlling vibration and acoustics.
Download or read book Mechanical Vibration and Shock Analysis Specification Development written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 5: Specification Development This volume focuses on specification development in accordance with the principle of tailoring. Extreme response and the fatigue damage spectra are defined for each type of stress (sinusoidal vibration, swept sine, shock, random vibration, etc.). The process for establishing a specification from the life cycle profile of the equipment which will be subject to these types of stresses is then detailed. The analysis takes account of the uncertainty factor, designed to cover uncertainties related to the real-world environment and mechanical strength, and the test factor, which takes account of the number of tests performed to demonstrate the resistance of the equipment. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book Mechanical Vibrations written by Tomasz Krysinski and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: For all rotational machines, the analysis of dynamic stresses and the resulting vibrations is an important subject. When it comes to helicopters and piston engines, this analysis becomes crucial. From the design of parts working under stress to the reduction of the vibration levels, the success of a project lies mainly in the hands of the dynamicists. The authors have combined their talents and experience to provide a complete presentation on the issues involved. Part one describes, in concrete terms, the main dynamic phenomena and how they can be observed in reality. Part two presents information about the modeling methods required to understand the dynamic phenomena and develop solutions capable of eliminating the most serious effects.
Download or read book Optimal Protection from Impact Shock and Vibration written by Dimitry V Balandin and published by CRC Press. This book was released on 2001-03-07 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems that provide protection from impact, shock and vibration are held up by sophisticated physical principles. In this volume, the author explores those principles in a straightforward manner. All aspects of the theory of optimal isolation are presented, from a description of the systems that use these principles to the design of such systems and the limits of the approach. The text offers several examples of how optimal isolation has been applied in real-world situations, thus serving to emphasize and elucidate the explanation of the theory. Optimal Protection From Impact, Shock and Vibration is ideal for applied engineers and mathematicians, whether students or professionals, who need to understand optimal protection.
Download or read book Elements of Mechanical Vibration written by R. N. Iyengar and published by I. K. International Pvt Ltd. This book was released on 2010-08 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an entry level textbook to the subject of vibration of linear mechanical systems. All the topics prescribed by leading universities for study in undergraduate engineering courses are covered in the book in a graded manner. With minimum amount of m
Download or read book Mechanical Vibration and Shock Analysis Specification Development written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 5: Specification Development This volume focuses on specification development in accordance with the principle of tailoring. Extreme response and the fatigue damage spectra are defined for each type of stress (sinusoidal vibration, swept sine, shock, random vibration, etc.). The process for establishing a specification from the life cycle profile of the equipment which will be subject to these types of stresses is then detailed. The analysis takes account of the uncertainty factor, designed to cover uncertainties related to the real-world environment and mechanical strength, and the test factor, which takes account of the number of tests performed to demonstrate the resistance of the equipment. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book Harris Shock and Vibration Handbook written by Allan G. Piersol and published by McGraw Hill Professional. This book was released on 2009-10-01 with total page 1199 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic reference on shock and vibration, fully updated with the latest advances in the field Written by a team of internationally recognized experts, this comprehensive resource provides all the information you need to design, analyze, install, and maintain systems subject to mechanical shock and vibration. The book covers theory, instrumentation, measurement, testing, control methodologies, and practical applications. Harris' Shock and Vibration Handbook, Sixth Edition, has been extensively revised to include innovative techniques and technologies, such as the use of waveform replication, wavelets, and temporal moments. Learn how to successfully apply theory to solve frequently encountered problems. This definitive guide is essential for mechanical, aeronautical, acoustical, civil, electrical, and transportation engineers. EVERYTHING YOU NEED TO KNOW ABOUT MECHANICAL SHOCK AND VIBRATION, INCLUDING Fundamental theory Instrumentation and measurements Procedures for analyzing and testing systems subject to shock and vibration Ground-motion, fluid-flow, wind-. and sound-induced vibration Methods for controlling shock and vibration Equipment design The effects of shock and vibration on humans
