Download or read book Mechanical Technology written by Dennis Henry Bacon and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised in line with the new Engineering syllabus. In particular the section on heat transfer has been expanded.
Download or read book Mechanical Engineering Technologies and Applications Volume 2 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-11-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Mechanical Technology written by George Frederick Charnock and published by . This book was released on 1915 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Sound written by Karin Bijsterveld and published by MIT Press. This book was released on 2008 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tracing efforts to control unwanted sound--the noise of industry, city traffic, gramophones and radios, and aircraft--from the late nineteenth to the late twentieth century.
Download or read book Understanding Electro Mechanical Engineering written by Lawrence J. Kamm and published by John Wiley & Sons. This book was released on 1995-09-05 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on electromechanical systems in a variety of fields, this accessible introductory text brings you coverage of the full range of electrical mechanical devices used today. You'll gain a comprehensive understanding of the design process and get valuable insights into good design practice. UNDERSTANDING ELECTROMECHANICAL ENGINEERING will be of interest to anyone in need of a non-technical, interdisciplinary introduction to the thriving field of mechatronics.
Download or read book The War of Desire and Technology at the Close of the Mechanical Age written by Allucquère Rosanne Stone and published by MIT Press. This book was released on 1996 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human communication has traditionally revealed important aspects of identity such as gender, age and race. However, such information is now often masked by computer-mediated communications. This text examines the various ways modern technology is challenging conventional notions of gender identity.
Download or read book Mechanical Technology in Agriculture written by Donald Mack Johnson and published by . This book was released on 1998 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agricultural mechanization is the use of power and machinery to produce food and fiber. This has included the development of agricultural tools and machines, energy and power, irrigation and drainage, structures for animal housing and crop storage, and electrification. - p. 3.
Download or read book Newnes Mechanical Engineer s Pocket Book written by Roger Timings and published by Newnes. This book was released on 2013-10-22 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newnes Mechanical Engineer's Pocket Book is an easy to use pocket book intended to aid mechanical engineers engaged in design and manufacture and others who require a quick, day-to-day reference for useful workshop information. The book is a compilation of useful data, providing abstracts of many technical materials in various technical areas. The text is divided into five main parts: Engineering Mathematics and Science, Engineering Design Data, Engineering Materials, Computer Aided Engineering, and Cutting Tools. These main sections are further subdivided into topic areas that discuss such topics as engineering mathematics, power transmission and fasteners, mechanical properties, and polymeric materials. Mechanical engineers and those into mechanical design and shop work will find the book very useful.
Download or read book Integrated Computer Technologies in Mechanical Engineering 2020 written by Mykola Nechyporuk and published by Springer Nature. This book was released on 2021-01-18 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses conference topics such as information technology in the design and manufacture of engines; information technology in the creation of rocket space systems; aerospace engineering; transport systems and logistics; big data and data science; nano-modeling; artificial intelligence and smart systems; networks and communication; cyber-physical systems and IoE; and software engineering and IT infrastructure. The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering” – Synergetic Engineering (ICTM) was formed to bring together outstanding researchers and practitioners in the field of information technology, and whose work involves the design and manufacture of engines, creation of rocket space systems, and aerospace engineering, from all over the world to share their experiences and expertise. It was established by the National Aerospace University “Kharkiv Aviation Institute.” The ICTM’2020 conference was held in Kharkiv, Ukraine on October 28–30, 2020.
Download or read book A History of Mechanical Engineering written by Ce Zhang and published by Springer Nature. This book was released on 2020-01-03 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the history of mechanical engineering since the Bronze Age. Focusing on machinery inventions and the development of mechanical technology, it also discusses the machinery industry and modern mechanical education. The evolution of machinery is divided into three stages: Ancient (before the European Renaissance), Modern (mainly including the two Industrial Revolutions) and Contemporary (since the Revolution in Physics, especially post Second World War). The book not only clarifies the development of mechanical engineering, but also reveals the driving forces behind it – e.g. the economy, national defense and human scientific research activities – to highlight the links between technology and society; mechanical engineering and the natural sciences; and mechanical engineering and related technological areas. Though mainly intended as a textbook or supplemental reading for graduate students, the book also offers a unique resource for researchers and engineers in mechanical engineering who wish to broaden their horizons.
Download or read book Optical Principles and Technology for Engineers written by James Stewart and published by CRC Press. This book was released on 1996-04-23 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing the principles of physical and geometrical optics from an engineering point of view, this book explains current optical technology and the applications of optical methods in a wide variety of fields, from astronomy and agriculture to medicine and semiconductors. It offers guidance in the selection of optical components for the construction of bread-board models using commercially available, standard components, and provides immediately useful equations without unnecessary mathematical derivations.
Download or read book Mechanical Engineering Principles written by John Bird and published by Routledge. This book was released on 2012-05-04 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Mechanical Engineering Principles offers a student-friendly introduction to core engineering topics that does not assume any previous background in engineering studies, and as such can act as a core textbook for several engineering courses. Bird and Ross introduce mechanical principles and technology through examples and applications rather than theory. This approach enables students to develop a sound understanding of the engineering principles and their use in practice. Theoretical concepts are supported by over 600 problems and 400 worked answers. The new edition will match up to the latest BTEC National specifications and can also be used on mechanical engineering courses from Levels 2 to 4"--
Download or read book Materials and Technologies in Mechanical Engineering written by Dmitry А. Chinakhov and published by Trans Tech Publications Ltd. This book was released on 2018-10-30 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only
Download or read book Greek and Roman Technology A Sourcebook written by Andrew N. Sherwood and published by Routledge. This book was released on 2003-10-04 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume the authors translate and annotate key passages from ancient authors to provide a history and an analysis of the origins and development of technology. Among the topics covered are: * energy * basic mechanical devices * agriculture * food processing and diet * mining and metallurgy * construction and hydraulic engineering * household industry * transport and trade * military technology. The sourcebook presents 150 ancient authors and a diverse range of literary genres, such as, the encyclopedic Natural Histories of Pliny the Elder, the poetry of Homer and Hesiod, the philosophy of Plato, Aristotle and Lucretius and the agricultural treatise of Varro. Humphrey, Oleson and Sherwood provide a comprehensive and accessible collection of rich and varied sources to illustrate and elucidate the beginnings of technology. Glossaries of technological terminology, indices of authors and subjects, introductions outlining the general significance of the evidence, notes to explain the specific details, and a recent bibliography make this volume a valuable research and teaching tool.
Download or read book Mechanical Engineering and Technology written by Tianbiao Zhang and published by Springer Science & Business Media. This book was released on 2012-02-22 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011. Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings. This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation. We hope that researchers, graduate students and other interested readers benefit scientifically from the book and also find it stimulating in the process.
Download or read book Advanced Manufacturing Systems and Technology written by E. Kuljanic and published by Springer. This book was released on 2014-05-04 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on the Fourth International Conference on Advanced Manufacturing Systems and Technology - AMST '96 aims at presenting trend and up-to-date information on the latest developments - research results and industrial experience in the field of machining processes, optimization and process planning, forming, flexible machining systems, non conventional machining, robotics and control, measuring and quality, thus providing an international forum for a beneficial exchange of ideas, and furthering a favourable cooperation between research and industry.
Download or read book Calendar written by University of Cape Town and published by . This book was released on 1922 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
