Download or read book Mechanical Reliability Improvement written by Robert Little and published by CRC Press. This book was released on 2002-09-25 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing probability and statistical concepts developed using pseudorandom numbers, this book covers enumeration-, simulation-, and randomization-based statistical analyses for comparison of the test performance of alternative designs, as well as simulation- and randomization-based tests for examination of the credibility of statistical presumptions. the book discusses centroid and moment of inertia analogies for mean and variance and the organization structure of completely randomized, randomized complete block, and split spot experiment test programs. Purchase of the text provides access to 200 microcomputer programs illustrating a wide range of reliability and statistical analyses.

Download or read book Methods for Reliability Improvement and Risk Reduction written by Michael Todinov and published by John Wiley & Sons. This book was released on 2018-12-10 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability is one of the most important attributes for the products and processes of any company or organization. This important work provides a powerful framework of domain-independent reliability improvement and risk reducing methods which can greatly lower risk in any area of human activity. It reviews existing methods for risk reduction that can be classified as domain-independent and introduces the following new domain-independent reliability improvement and risk reduction methods: Separation Stochastic separation Introducing deliberate weaknesses Segmentation Self-reinforcement Inversion Reducing the rate of accumulation of damage Permutation Substitution Limiting the space and time exposure Comparative reliability models The domain-independent methods for reliability improvement and risk reduction do not depend on the availability of past failure data, domain-specific expertise or knowledge of the failure mechanisms underlying the failure modes. Through numerous examples and case studies, this invaluable guide shows that many of the new domain-independent methods improve reliability at no extra cost or at a low cost. Using the proven methods in this book, any company and organisation can greatly enhance the reliability of its products and operations.

Download or read book Mechanical Reliability Improvement written by Robert Little and published by CRC Press. This book was released on 2002-09-25 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing probability and statistical concepts developed using pseudorandom numbers, this book covers enumeration-, simulation-, and randomization-based statistical analyses for comparison of the test performance of alternative designs, as well as simulation- and randomization-based tests for examination of the credibility of statistical presumptions. the book discusses centroid and moment of inertia analogies for mean and variance and the organization structure of completely randomized, randomized complete block, and split spot experiment test programs. Purchase of the text provides access to 200 microcomputer programs illustrating a wide range of reliability and statistical analyses.

Download or read book Practical Plant Failure Analysis written by Neville W. Sachs and published by CRC Press. This book was released on 2016-04-19 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Component failures result from a combination of factors involving materials science, mechanics, thermodynamics, corrosion, and tribology. With the right guidance, you don’t have to be an authority in all of these areas to become skilled at diagnosing and preventing failures. Based on the author’s more than thirty years of experience, Practical Plant Failure Analysis: A Guide to Understanding Machinery Deterioration and Improving Equipment Reliability is a down-to-earth guide to improving machinery maintenance and reliability. Illustrated with hundreds of diagrams and photographs, this book examines... · When and how to conduct a physical failure analysis · Basic material properties including heat treating mechanisms, work hardening, and the effects of temperature changes on material properties · The differences in appearance between ductile overload, brittle overload, and fatigue failures · High cycle fatigue and how to differentiate between high stress concentrations and high operating stresses · Low cycle fatigue and unusual fatigue situations · Lubrication and its influence on the three basic bearing designs · Ball and roller bearings, gears, fasteners, V-belts, and synchronous belts Taking a detailed and systematic approach, Practical Plant Failure Analysis thoroughly explains the four major failure mechanisms—wear, corrosion, overload, and fatigue—as well as how to identify them. The author clearly identifies how these mechanisms appear in various components and supplies convenient charts that demonstrate how to identify the specific causes of failure.

Download or read book Reliability in Automotive and Mechanical Engineering written by Bernd Bertsche and published by Springer Science & Business Media. This book was released on 2008-04-30 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defects generate a great economic problem for suppliers who are faced with increased duties. Customers expect increased efficiency and dependability of technical product of - also growing - complexity. The authors give an introduction to a theory of dependability for engineers. The book may serve as a reference book as well, enhancing the knowledge of the specialists and giving a lot of theoretical background and information, especially on the dependability analysis of whole systems.

Download or read book Reliability Design of Mechanical Systems written by Seongwoo Woo and published by Springer. This book was released on 2019-07-03 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition of this book offers an expanded overview of the reliability design of mechanical systems and describes the reliability methodology, including a parametric accelerated life test (ALT) plan, a load analysis, a tailored series of parametric ALTs with action plans, and an evaluation of the final designs to ensure the design requirements are satisfied. It covers both the quantitative and qualitative approaches of the reliability design forming in the development process of mechanical products, with a focus on parametric ALT and illustrated via case studies. This new reliability methodology – parametric ALT should help mechanical and civil engineers to uncover design parameters improving product design and avoiding recalls. Updated chapters cover product recalls and assessment of their significance, modern definitions in reliability engineering, parametric accelerated life testing in mechanical systems, and extended case studies. For this revised edition, one new chapter has been introduced to reflect recent developments in analysis of fluid motion and mechanical vibration. Other chapters are expanded and updated to improve the explanation of topics including structures and load analysis, failure mechanics, design and reliability testing, and mechanical system failure. The broad scope gives the reader an overview of the state-of-the-art in the reliability design of mechanical systems and an indication of future directions and applications. It will serve as a solid introduction to the field for advanced students, and a valuable reference for those working in the development of mechanical systems and related areas.

Download or read book Design of Mechanical Systems Based on Statistics written by Seong-woo Woo and published by CRC Press. This book was released on 2021-05-27 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces and explains the parametric accelerated life testing (ALT) methodology as a new reliability methodology based on statistics, to help avoid recalls of products in the marketplace. The book includes problems and case studies to help with reader comprehension. It provides an introduction to reliability design of the mechanical system as an alternative to Taguchi’s experimental methodology and enables engineers to correct faulty designs and determine if the targeted product reliability is achieved. Additionally, it presents a robust design methodology of mechanical products to withstand a variety of loads. This book is intended for engineers of many fields, including industrial engineers, mechanical engineers, and systems engineers.

Download or read book The Competitive Edge written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: To maintain competitiveness in the emerging global economy, U.S. manufacturing must rise to new standards of product quality, responsiveness to customers, and process flexibility. This volume presents a concise and well-organized analysis of new research directions to achieve these goals. Five critical areas receive in-depth analysis of present practices, needed improvement, and research priorities: Advanced engineered materials that offer the prospect of better life-cycle performance and other gains. Equipment reliability and maintenance practices for better returns on capital investment. Rapid product realization techniques to speed delivery to the marketplace. Intelligent manufacturing control for improved reliability and greater precision. Building a workforce with the multidisciplinary skills needed for competitiveness. This sound and accessible analysis will be useful to manufacturing engineers and researchers, business executives, and economic and policy analysts.

Download or read book Reliability Growth written by Panel on Reliability Growth Methods for Defense Systems and published by National Academy Press. This book was released on 2015-03-01 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: A high percentage of defense systems fail to meet their reliability requirements. This is a serious problem for the U.S. Department of Defense (DOD), as well as the nation. Those systems are not only less likely to successfully carry out their intended missions, but they also could endanger the lives of the operators. Furthermore, reliability failures discovered after deployment can result in costly and strategic delays and the need for expensive redesign, which often limits the tactical situations in which the system can be used. Finally, systems that fail to meet their reliability requirements are much more likely to need additional scheduled and unscheduled maintenance and to need more spare parts and possibly replacement systems, all of which can substantially increase the life-cycle costs of a system. Beginning in 2008, DOD undertook a concerted effort to raise the priority of reliability through greater use of design for reliability techniques, reliability growth testing, and formal reliability growth modeling, by both the contractors and DOD units. To this end, handbooks, guidances, and formal memoranda were revised or newly issued to reduce the frequency of reliability deficiencies for defense systems in operational testing and the effects of those deficiencies. "Reliability Growth" evaluates these recent changes and, more generally, assesses how current DOD principles and practices could be modified to increase the likelihood that defense systems will satisfy their reliability requirements. This report examines changes to the reliability requirements for proposed systems; defines modern design and testing for reliability; discusses the contractor's role in reliability testing; and summarizes the current state of formal reliability growth modeling. The recommendations of "Reliability Growth" will improve the reliability of defense systems and protect the health of the valuable personnel who operate them.

Download or read book Improving Maintainability and Reliability Through Design written by Graham Thompson and published by . This book was released on 1999 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thompson (mechanical engineering, UMIST, UK and researcher and author in the field) addresses maintainability and reliability issues in engineering systems and products from a design perspective. Chapters covering general design issues; basic principles of maintainability and reliability; design review; equipment and system evaluation; failure mode analysis; specifications, contracts, and management; concept design; equipment design principles for maintainability and reliability; design for reliability; design to reduce ongoing maintenance costs; and the feedback of information to design. Suitable both as a reference text for particular design methods and as a broader examination of how to achieve maintainability and reliability through design. Distributed by ASME. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Improvement of the mechanical reliability of monolithic refractory linings for coal gasification process vessels written by Lynchburg Research Center. Materials and Chemical Technology Laboratory and published by . This book was released on 1977 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reliability Design of Mechanical Systems written by Seongwoo Woo and published by Springer. This book was released on 2017-01-12 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes basic reliability concepts – parametric ALT plan, failure mechanism and design, and reliability testing with acceleration factor and sample size equation. A generalized life-stress failure model with a new effort concept has been derived and recommended to calculate the acceleration factor of the mechanical system. The new sample size equation with the acceleration factor has also been derived to carry out the parametric ALT. This new parametric ALT should help a mechanical/civil engineer to uncover the design parameters affecting reliability during the design process of the mechanical system. Consequently, it should help companies to improve product reliability and avoid recalls due to the product/structure failures in the field. As the improper or missing design parameters in the design phase are experimentally identified by this new reliability design method - parametric ALT, the mechanical/civil engineering system might improve in reliability by the increase in lifetime and the reduction in failure rate.

Download or read book Reliability Management and Engineering written by Harish Garg and published by CRC Press. This book was released on 2020-06-15 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability technology plays an important role in the present era of industrial growth, optimal efficiency, and reducing hazards. This book provides insights into current advances and developments in reliability engineering, and the research presented is spread across all branches. It discusses interdisciplinary solutions to complex problems using different approaches to save money, time, and manpower. It presents methodologies of coping with uncertainty in reliability optimization through the usage of various techniques such as soft computing, fuzzy optimization, uncertainty, and maintenance scheduling. Case studies and real-world examples are presented along with applications that can be used in practice. This book will be useful to researchers, academicians, and practitioners working in the area of reliability and systems assurance engineering. Provides current advances and developments across different branches of engineering. Reviews and analyses case studies and real-world examples. Presents applications to be used in practice. Includes numerous examples to illustrate theoretical results.

Download or read book Mechanical Reliability Improvement written by Robert Little and published by CRC Press. This book was released on 2002-09-25 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing probability and statistical concepts developed using pseudorandom numbers, this book covers enumeration-, simulation-, and randomization-based statistical analyses for comparison of the test performance of alternative designs, as well as simulation- and randomization-based tests for examination of the credibility of statistical presumptions. the book discusses centroid and moment of inertia analogies for mean and variance and the organization structure of completely randomized, randomized complete block, and split spot experiment test programs. Purchase of the text provides access to 200 microcomputer programs illustrating a wide range of reliability and statistical analyses.

Download or read book Improving Machinery Reliability written by Heinz P. Bloch and published by Gulf Professional Publishing. This book was released on 1998-09-18 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Requirements specifications. Vendor selection and bid conditioning. Machinery reliability audits and reviews. Maintenance and benchmarking reliability. Life cycle cost studies. Extending motor life in the process plant environment. Equipment reliability improvement through reduced pipe stress. Spare parts and their effect on service factor. Startup responsibilities. Maintenance for continued reliability. Maintenance cost reduction. Lubrication and reliability. Providing safety and reliability through modern sealing technology. Appendix. Index.

Download or read book Maintenance Replacement and Reliability written by Andrew K.S. Jardine and published by CRC Press. This book was released on 2013-05-28 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: A completely revised and updated edition of a bestseller, Maintenance, Replacement, and Reliability: Theory and Applications, Second Edition supplies the tools needed for making data-driven physical asset management decisions. The well-received first edition quickly became a mainstay for professors, students, and professionals, with its clear prese

Download or read book Practical Plant Failure Analysis written by Neville W Sachs, P.E. and published by CRC Press. This book was released on 2019-10-08 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a practical guide for those who do the work of maintaining and improving the reliability of mechanical machinery. It is for engineers and skilled trades personnel who want to understand how failures happen and how the physical causes of the great majority can be readily diagnosed in the field. It explains the four major failure mechanisms, wear, corrosion, overload, and fatigue and, using easy-to-read charts, how they can be diagnosed at the site of the failure. Then, knowing the physical failure mechanics involved, the reader can accurately solve the human causes. To improve the reader’s understanding, all the diagrams and most of the tables have been redrawn. The number of actual failure examples has been increased, plus the last chapter on miscellaneous machine elements includes new material on couplings, universal joints, and plain bearings. Features A practical field guide showing how to recognize how failures occur that can be used to solve more than 85% of mechanical machinery failures Incorporates multiple easy-to-follow logic trees to help the reader diagnose the physical causes of the failure without needing detailed laboratory analysis Explains how the mechanics, corrosion, materials science, and tribology of components can fit together to improve machinery reliability Includes more than 150 completely redrawn charts and tables, plus almost 250 actual failure photographs to help guide the reader to an accurate analysis Contains clear and detailed explanations of how lubricants function and the critical roles of corrosion and lubrication play in causing mechanical failures