Download or read book Mechanical Properties of Some III V and II Vi Semiconductor Alloys written by Rangaswamy Navamathavan and published by LAP Lambert Academic Publishing. This book was released on 2011-12 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors, the major area of research in materials science, have offered solutions to several important technological problems and provided many devices for day to day applications. Development in novel semiconductor materials such as heterostructure systems and the ever-diminishing size of devices are producing an explosion of interest and activity in the field of semiconductor materials and devices. The characterization of epitaxial layers and their surfaces have benefited a lot from the enormous progress of micro and nanomechanical analysis techniques. In particular, the dramatic improvement of the structural quality of semiconductor materials results from the level of sophistication achieved with such analysis techniques. First of all, micromechanical technique is nondestructive and its sensitivity has been improved to such an extent that nowadays the epilayer analysis can be performed on layers with thicknesses ranging on the atomic scale. Thus, this book addresses some of the collective works on III-V semiconductors which could be to be extremely important from a technological point of view, i.e., for the surveillance of modern semiconductor processes.
Download or read book Properties of Semiconductor Alloys written by Sadao Adachi and published by John Wiley & Sons. This book was released on 2009-03-12 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main purpose of this book is to provide a comprehensive treatment of the materials aspects of group-IV, III−V and II−VI semiconductor alloys used in various electronic and optoelectronic devices. The topics covered in this book include the structural, thermal, mechanical, lattice vibronic, electronic, optical and carrier transport properties of such semiconductor alloys. The book reviews not only commonly known alloys (SiGe, AlGaAs, GaInPAs, and ZnCdTe) but also new alloys, such as dilute-carbon alloys (CSiGe, CSiSn, etc.), III−N alloys, dilute-nitride alloys (GaNAs and GaInNAs) and Mg- or Be-based II−VI semiconductor alloys. Finally there is an extensive bibliography included for those who wish to find additional information as well as tabulated values and graphical information on the properties of semiconductor alloys.
Download or read book Properties of Group IV III V and II VI Semiconductors written by Sadao Adachi and published by John Wiley & Sons. This book was released on 2005-06-14 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost all the semiconductors of practical interest are the group-IV, III-V and II-VI semiconductors and the range of technical applications of such semiconductors is extremely wide. The purpose of this book is twofold: * to discuss the key properties of the group-IV, III-V and II-VI semiconductors * to systemize these properties from a solid-state physics aspect The majority of the text is devoted to the description of the lattice structural, thermal, elastic, lattice dynamic, electronic energy-band structural, optical and carrier transport properties of these semiconductors. Some corrective effects and related properties, such as piezoelectric, elastooptic and electrooptic properties, are also discussed. The book contains convenient tables summarizing the various material parameters and the definitions of important semiconductor properties. In addition, graphs are included in order to make the information more quantitative and intuitive. The book is intended not only for semiconductor device engineers, but also physicists and physical chemists, and particularly students specializing in the fields of semiconductor synthesis, crystal growth, semiconductor device physics and technology.
Download or read book Properties of Aluminium Gallium Arsenide written by Sadao Adachi and published by IET. This book was released on 1993 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The alloy system A1GaAs/GaAs is potentially of great importance for many high-speed electronics and optoelectronic devices, because the lattice parameter difference GaAs and A1GaAs is very small, which promises an insignificant concentration of undesirable interface states. Thanks to this prominent feature, a number of interesting properties and phenomena, such as high-mobility low-dimensional carrier gases, resonant tunnelling and fractional quantum Hall effect, have been found in the A1GaAs/GaAs heterostructure system. New devices, such as modulation-doped FETs, heterojunction bipolar transistors, resonant tunnelling transistors, quantum-well lasers, and other photonic and quantum-effect devices, have also been developed recently using this material system. These areas are recognized as not being the most interesting and active fields in semiconductor physics and device engineering.
Download or read book Physical Properties of III V Semiconductor Compounds written by Sadao Adachi and published by John Wiley & Sons. This book was released on 1992-11-10 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is two-fold: to examine key properties of III-V compounds and to present diverse material parameters and constants of these semiconductors for a variety of basic research and device applications. Emphasis is placed on material properties not only of Inp but also of InAs, GaAs and GaP binaries.
Download or read book Compound Semiconductors 1995 Proceedings of the Twenty Second INT Symposium on Compound Semiconductors held in Cheju Island Korea 28 August 2 September 1995 written by Woo and published by CRC Press. This book was released on 1996-04-25 with total page 1352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compound Semiconductors 1995 focuses on emerging applications for GaAs and other compound semiconductors, such as InP, GaN, GaSb, ZnSe, and SiC, in the electronics and optoelectronics industries. The book presents the research and development work in all aspects of compound semiconductors. It reflects the maturity of GaAs as a semiconductor material and the rapidly increasing pool of research information on many other compound semiconductors. Covering the full breadth of the subject, from growth through processing to devices and integrated circuits, this volume provides researchers in materials science, device physics, condensed matter physics, and electrical and electronic engineering with a comprehensive overview of developments in this well-established research area.
Download or read book Compound Semiconductors 1995 Proceedings of the Twenty Second INT Symposium on Compound Semiconductors held in Cheju Island Korea 28 August 2 September 1995 written by Institute of Physics Conference and published by CRC Press. This book was released on 2020-10-28 with total page 1345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compound Semiconductors 1995 focuses on emerging applications for GaAs and other compound semiconductors, such as InP, GaN, GaSb, ZnSe, and SiC, in the electronics and optoelectronics industries. The book presents the research and development work in all aspects of compound semiconductors. It reflects the maturity of GaAs as a semiconductor material and the rapidly increasing pool of research information on many other compound semiconductors. Covering the full breadth of the subject, from growth through processing to devices and integrated circuits, this volume provides researchers in materials science, device physics, condensed matter physics, and electrical and electronic engineering with a comprehensive overview of developments in this well-established research area.
Download or read book Heteroepitaxy of Semiconductors written by John E. Ayers and published by CRC Press. This book was released on 2018-10-08 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heteroepitaxy has evolved rapidly in recent years. With each new wave of material/substrate combinations, our understanding of how to control crystal growth becomes more refined. Most books on the subject focus on a specific material or material family, narrowly explaining the processes and techniques appropriate for each. Surveying the principles common to all types of semiconductor materials, Heteroepitaxy of Semiconductors: Theory, Growth, and Characterization is the first comprehensive, fundamental introduction to the field. This book reflects our current understanding of nucleation, growth modes, relaxation of strained layers, and dislocation dynamics without emphasizing any particular material. Following an overview of the properties of semiconductors, the author introduces the important heteroepitaxial growth methods and provides a survey of semiconductor crystal surfaces, their structures, and nucleation. With this foundation, the book provides in-depth descriptions of mismatched heteroepitaxy and lattice strain relaxation, various characterization tools used to monitor and evaluate the growth process, and finally, defect engineering approaches. Numerous examples highlight the concepts while extensive micrographs, schematics of experimental setups, and graphs illustrate the discussion. Serving as a solid starting point for this rapidly evolving area, Heteroepitaxy of Semiconductors: Theory, Growth, and Characterization makes the principles of heteroepitaxy easily accessible to anyone preparing to enter the field.
Download or read book Copper Zinc Tin Sulfide Based Thin Film Solar Cells written by Kentaro Ito and published by John Wiley & Sons. This book was released on 2015-02-23 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning with an overview and historical background of Copper Zinc Tin Sulphide (CZTS) technology, subsequent chapters cover properties of CZTS thin films, different preparation methods of CZTS thin films, a comparative study of CZTS and CIGS solar cell, computational approach, and future applications of CZTS thin film solar modules to both ground-mount and rooftop installation. The semiconducting compound (CZTS) is made up earth-abundant, low-cost and non-toxic elements, which make it an ideal candidate to replace Cu(In,Ga)Se2 (CIGS) and CdTe solar cells which face material scarcity and toxicity issues. The device performance of CZTS-based thin film solar cells has been steadily improving over the past 20 years, and they have now reached near commercial efficiency levels (10%). These achievements prove that CZTS-based solar cells have the potential to be used for large-scale deployment of photovoltaics. With contributions from leading researchers from academia and industry, many of these authors have contributed to the improvement of its efficiency, and have rich experience in preparing a variety of semiconducting thin films for solar cells.
Download or read book Earth Abundant Materials for Solar Cells written by Sadao Adachi and published by John Wiley & Sons. This book was released on 2015-10-28 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically describes the physical and materials properties of copper-based quaternary chalcogenide semiconductor materials, enabling their potential for photovoltaic device applications. Intended for scientists and engineers, in particular, in the fields of multinary semiconductor physics and a variety of photovoltaic and optoelectronic devices.
Download or read book Semiconductor Radiation Detectors written by Alan Owens and published by CRC Press. This book was released on 2019-05-31 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Choice Recommended Title, July 2020 Bringing together material scattered across many disciplines, Semiconductor Radiation Detectors provides readers with a consolidated source of information on the properties of a wide range of semiconductors; their growth, characterization and the fabrication of radiation sensors with emphasis on the X- and gamma-ray regimes. It explores the promise and limitations of both the traditional and new generation of semiconductors and discusses where the future in semiconductor development and radiation detection may lie. The purpose of this book is two-fold; firstly to serve as a text book for those new to the field of semiconductors and radiation detection and measurement, and secondly as a reference book for established researchers working in related disciplines within physics and engineering. Features: The only comprehensive book covering this topic Fully up-to-date with new developments in the field Provides a wide-ranging source of further reference material
Download or read book Chemical Vapour Deposition written by Anthony C Jones and published by Royal Society of Chemistry. This book was released on 2008-12-17 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Vapour Deposition (CVD) involves the deposition of thin solid films from chemical precursors in the vapour phase, and encompasses a variety of deposition techniques, including a range of thermal processes, plasma enhanced CVD (PECVD), photon- initiated CVD, and atomic layer deposition (ALD). The development of CVD technology owes a great deal to collaboration between different scientific disciplines such as chemistry, physics, materials science, engineering and microelectronics, and the publication of this book will promote and stimulate continued dialogue between scientists from these different research areas. The book is one of the most comprehensive overviews ever written on the key aspects of chemical vapour deposition processes and it is more comprehensive, technically detailed and up-to-date than other books on CVD. The contributing authors are all practising CVD technologists and are leading international experts in the field of CVD. It presents a logical and progressive overview of the various aspects of CVD processes. Basic concepts, such as the various types of CVD processes, the design of CVD reactors, reaction modelling and CVD precursor chemistry are covered in the first few chapters. Then follows a detailed description of the use of a variety CVD techniques to deposit a wide range of materials, including semiconductors, metals, metal oxides and nitrides, protective coatings and functional coatings on glass. Finally and uniquely, for a technical volume, industrial and commercial aspects of CVD are also discussed together with possible future trends, which is an unusual, but very important aspect of the book. The book has been written with CVD practitioners in mind, such as the chemist who wishes to learn more about CVD processes, or the CVD technologist who wishes to gain an increased knowledge of precursor chemistry. The volume will prove particularly useful to those who have recently entered the field, and it will also make a valuable contribution to chemistry and materials science lecture courses at undergraduate and postgraduate level.
Download or read book Experimental Mechanics written by Emmanuel E. Gdoutos and published by Springer Nature. This book was released on 2021-11-15 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents in a clear, simple, straightforward, novel and unified manner the most used methods of experimental mechanics of solids for the determination of displacements, strains and stresses. Emphasis is given on the principles of operation of the various methods, not in their applications to engineering problems. The book is divided into sixteen chapters which include strain gages, basic optics, geometric and interferometric moiré, optical methods (photoelasticity, interferometry, holography, caustics, speckle methods, digital image correlation), thermoelastic stress analysis, indentation, optical fibers, nondestructive testing, and residual stresses. The book will be used not only as a learning tool, but as a basis on which the researcher, the engineer, the experimentalist, the student can develop their new own ideas to promote research in experimental mechanics of solids.
Download or read book Antimonide Related Strained Layer Heterostructures written by M. O. Manasreh and published by CRC Press. This book was released on 2019-08-16 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in antimonide-related heterostructures is burgeoning due to their applications as light sources, diode lasers, modulators, filters, switches, nonlinear optics, and field-defect transistors. This volume, featuring contributions from leading researchers in the field, is the first book to focus on antimonide-related topics. It offers to both the beginning student and the advanced researcher a comprehensive review of the state of the art in this exciting new area of research.
Download or read book X Ray Absorption Spectroscopy of Semiconductors written by Claudia S. Schnohr and published by Springer. This book was released on 2014-11-05 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray Absorption Spectroscopy (XAS) is a powerful technique with which to probe the properties of matter, equally applicable to the solid, liquid and gas phases. Semiconductors are arguably our most technologically-relevant group of materials given they form the basis of the electronic and photonic devices that now so widely permeate almost every aspect of our society. The most effective utilisation of these materials today and tomorrow necessitates a detailed knowledge of their structural and vibrational properties. Through a series of comprehensive reviews, this book demonstrates the versatility of XAS for semiconductor materials analysis and presents important research activities in this ever growing field. A short introduction of the technique, aimed primarily at XAS newcomers, is followed by twenty independent chapters dedicated to distinct groups of materials. Topics span dopants in crystalline semiconductors and disorder in amorphous semiconductors to alloys and nanometric material as well as in-situ measurements of the effects of temperature and pressure. Summarizing research in their respective fields, the authors highlight important experimental findings and demonstrate the capabilities and applications of the XAS technique. This book provides a comprehensive review and valuable reference guide for both XAS newcomers and experts involved in semiconductor materials research.
Download or read book Ternary Alloys Based on III V Semiconductors written by Vasyl Tomashyk and published by CRC Press. This book was released on 2017-09-29 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-V semiconductors have attracted considerable attention due to their applications in the fabrication of electronic and optoelectronic devices as light-emitting diodes and solar cells. Because of their wide applications in a variety of devices, the search for new semiconductor materials and the improvement of existing materials is an important field of study. This new book covers all known information about phase relations in ternary systems based on III-V semiconductors. This book will be of interest to undergraduate and graduate students studying materials science, solid state chemistry, and engineering. It will also be relevant for researchers at industrial and national laboratories, in addition to phase diagram researchers, inorganic chemists, and solid state physicists.
Download or read book Dilute III V Nitride Semiconductors and Material Systems written by Ayse Erol and published by Springer Science & Business Media. This book was released on 2008-01-12 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current status of research and development in dilute III-V nitrides. It covers major developments in this new class of materials within 24 chapters from prominent research groups. The book integrates materials science and applications in optics and electronics in a unique way. It is valuable both as a reference work for researchers and as a study text for graduate students.
