Download or read book Nanostructured Materials written by T. Daniel Thangadurai and published by Springer Nature. This book was released on 2020-02-27 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the early stages of the development of nanostructures, including synthesis techniques, growth mechanisms, the physics and chemistry of nanostructured materials, various innovative characterization techniques, the need for functionalization and different functionalization methods as well as the various properties of nanostructured materials. It focuses on the applications of nanostructured materials, such as mechanical applications, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, as well as piezoelectric, agriculture, biomedical and, environmental remediation applications, and anti-microbial and antibacterial properties. Further, it includes a chapter on nanomaterial research developments, highlighting work on the life-cycle analysis of nanostructured materials and toxicity aspects.
Download or read book Mechanical Properties of Nanostructured Materials written by Abdolhossein Fereidoon and published by Xlibris Corporation. This book was released on 2016-09-26 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, with the improved abilities of computers, molecular modeling has become a powerful technique in computational chemistry with ever-increasing practical interests. At the moment, using effective algorithms along with powerful processors enables us to simulate systems, including thousands of atoms up to several microseconds. However, finding a balance between the computational costs and reliable results still remains a challenge. Two general approaches help us to reveal the behavior of these systems: quantum chemical calculations and molecular mechanics calculations. Quantum mechanics deals with physical phenomena as well as atoms behavior during chemical bonding and falls in the category of modern physics. In this book, two of the most practical quantum mechanics approaches are investigated: density functional theory (DFT) and density-functional tight-binding (DFTB).
Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties. One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying. With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.
Download or read book Mechanical Properties of Nanomaterials written by Joshua Pelleg and published by Springer Nature. This book was released on 2021-06-21 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the mechanical properties of nanomaterials produced by several techniques for various applications. The dislocations observed in specimens obtained in nanomaterials are discussed on the chapter about deformation process. Partial dislocations and grain boundary sliding deformation phenomena in nanomaterial specimens are also deeply discussed. Tests for tension, compression, and hardness are described. The behavior of nanomaterials is compared to macrosize specimens, and the results obtained for different fabrication methods are also compared. The special characteristics of nanomaterials are summarized at the end of the book.
Download or read book Nanotribology and Nanomechanics written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 1157 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent emergence and proliferation of proximal probes, e.g. SPM and AFM, and computational techniques for simulating tip-surface interactions has enabled the systematic investigation of interfacial problems on ever smaller scales, as well as created means for modifying and manipulating nanostructures. In short, they have led to the appearance of the new, interdisciplinary fields of micro/nanotribology and micro/nanomechanics. This volume serves as a timely, practical introduction to the principles of nanotribology and nanomechanics and applications to magnetic storage systems and MEMS/NEMS. Assuming some familiarity with macrotribology/mechanics, the book comprises chapters by internationally recognized experts, who integrate knowledge of the field from the mechanics and materials-science perspectives. They cover key measurement techniques, their applications, and theoretical modelling of interfaces, each beginning their contributions with macro- and progressing to microconcepts. After reviewing the fundamental experimental and theoretical aspects in the first part, Nanotribology and Nanomechanics then treats applications. Three groups of readers are likely to find this text valuable: graduate students, research workers, and practicing engineers. It can serve as the basis for a comprehensive, one- or two-semester course in scanning probe microscopy; applied scanning probe techniques; or nanotribology/nanomechanics/nanotechnology, in departments such as mechanical engineering, materials science, and applied physics. With a Foreword by Physics Nobel Laureate Gerd Binnig Dr. Bharat Bhushan is an Ohio Eminent Scholar and The Howard D. Winbigler Professor in the Department of Mechanical Engineering, Graduate Research Faculty Advisor in the Department of Materials Science and Engineering, and the Director of the Nanotribology Laboratory for Information Storage & MEMS/NEMS (NLIM) at the Ohio State University, Columbus, Ohio. He is an internationally recognized expert of tribology and mechanics on the macro- to nanoscales, and is one of the most prolific authors. He is considered by some a pioneer of the tribology and mechanics of magnetic storage devices and a leading researcher in the fields of nanotribology and nanomechanics using scanning probe microscopy and applications to micro/nanotechnology. He is the recipient of various international fellowships including the Alexander von Humboldt Research Prize for Senior Scientists, Max Planck Foundation Research Award for Outstanding Foreign Scientists, and the Fulbright Senior Scholar Award.
Download or read book Bulk Nanostructured Materials written by Michael J. Zehetbauer and published by John Wiley & Sons. This book was released on 2009-06-10 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing and mechanical behaviour of bulk nanostructured materials are one of the most interesting new fields of research on advanced materials systems. Many nanocrystalline materials possess very high strength with still good ductility, and exhibit high values of fatigue resistance and fracture toughness. There has been continuing interest in these nanomaterials for use in structural and biomedical applications, and this has led to a large number of research programs worldwide. This book focuses on the processing techniques, microstructures, mechanical and physical properties, and applications of bulk nanostructured materials, as well as related fundamental issues. Only since recently can such bulk nanostructured materials be produced in large bulk dimensions, which opens the door to their commercial applications.
Download or read book Nanostructured Materials and Their Applications written by Stergios Logothetidis and published by Springer Science & Business Media. This book was released on 2012-01-13 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of nanostructures and nanomaterials applied in the fields of energy and organic electronics. It combines the knowledge from advanced deposition and processing methods of nanomaterials such as laser-based growth and nanopatterning and state-of-the-art characterization techniques with special emphasis on the optical, electrical, morphological, surface and mechanical properties. Furthermore it contains theoretical and experimental aspects for different types of nanomaterials such as nanoparticles, nanotubes and thin films for organic electronics applications. The international group of authors specifically chosen for their distinguished expertise belong to the academic and industrial world in order to provide a broader perspective. The authors take an interdisciplinary approach of physics, chemistry, engineering, materials science and nanotechnology. It appeals to researchers and graduate students.
Download or read book Nanoelectronic Materials written by Loutfy H. Madkour and published by Springer. This book was released on 2019-06-27 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents synthesis techniques for the preparation of low-dimensional nanomaterials including 0D (quantum dots), 1D (nanowires, nanotubes) and 2D (thin films, few layers), as well as their potential applications in nanoelectronic systems. It focuses on the size effects involved in the transition from bulk materials to nanomaterials; the electronic properties of nanoscale devices; and different classes of nanomaterials from microelectronics to nanoelectronics, to molecular electronics. Furthermore, it demonstrates the structural stability, physical, chemical, magnetic, optical, electrical, thermal, electronic and mechanical properties of the nanomaterials. Subsequent chapters address their characterization, fabrication techniques from lab-scale to mass production, and functionality. In turn, the book considers the environmental impact of nanotechnology and novel applications in the mechanical industries, energy harvesting, clean energy, manufacturing materials, electronics, transistors, health and medical therapy. In closing, it addresses the combination of biological systems with nanoelectronics and highlights examples of nanoelectronic–cell interfaces and other advanced medical applications. The book answers the following questions: • What is different at the nanoscale? • What is new about nanoscience? • What are nanomaterials (NMs)? • What are the fundamental issues in nanomaterials? • Where are nanomaterials found? • What nanomaterials exist in nature? • What is the importance of NMs in our lives? • Why so much interest in nanomaterials? • What is at nanoscale in nanomaterials? • What is graphene? • Are pure low-dimensional systems interesting and worth pursuing? • Are nanotechnology products currently available? • What are sensors? • How can Artificial Intelligence (AI) and nanotechnology work together? • What are the recent advances in nanoelectronic materials? • What are the latest applications of NMs?
Download or read book Bulk Nanostructured Materials written by Ruslan Z. Valiev and published by John Wiley & Sons. This book was released on 2013-09-17 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent results in the area of bulk nanostructured materials and new trends in their severe plastic deformation (SPD) processing, where these techniques are now emerging from the domain of laboratory-scale research into the commercial production of various bulk nanomaterials. Special emphasis is placed on an analysis of the effect of nanostructures in materials fabricated by SPD on mechanical properties (strength and ductility, fatigue strength and life, superplasticity) and functional behavior (shape memory effects, magnetic and electric properties), as well as the numerous examples of their innovative applications. There is a high innovation potential for industrial applications of bulk nanomaterials for structural use (materials with extreme strength) as well as for functional applications such as nanomagnets, materials for hydrogen storage, thermoelectric materials, superconductors, catalysts, and biomedical implants.
Download or read book Nanostructured Materials by High Pressure Severe Plastic Deformation written by Yuntian T. Zhu and published by Springer Science & Business Media. This book was released on 2006-01-20 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, it was reported that nanostructured materials processed under high pressure by HPT and ECAP have an extraordinary combination of both high strength and high ductility, which are two desirable, but rarely co-existing properties. These findings indicate that high-pressure is a critical factor that can be employed to process nanostructured materials with superior mechanical, and possibly also physical, properties. It is the objective of this workshop to review our current knowledge, identify issues for future research, and discuss future directions on the processing and properties of nanostructured materials via SPD techniques, with a special emphasis on high-pressure effects. The 42 peer-reviewed papers in this book cover areas of high pressure effect on the nanostructure and properties of SPD-processed materials, fundamentals of nanostructured materials, development of high-pressure SPD technologies for commercializations, recent advances of SPD technologies as well as applications and future markets of SPD-processed nanostructured materials.
Download or read book Nanostructure Control of Materials written by R H J Hannink and published by Taylor & Francis US. This book was released on 2006-02-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Nanotechnology is an area of science and technology where dimensions and tolerances in the range of 0.1 nm to 100nm play a critical role. Nanotechnology has opened up new worlds of opportunity. It encompasses precision engineering as well as electronics, electromechanical systems and mainstream biomedical applications in areas as diverse as gene therapy, drug delivery and novel drug discovery techniques. Nanostructured materials present exciting opportunities for manipulating structure and properties on the nanometer scale. The ability to engineer novel structures at the molecular level has led to unprecedented opportunities for materials design. This new book provides detailed insights into the synthesis/structure and property relationships of nanostructured materials. A valuable book for materials scientists, mechanical and electronic engineers and medical researchers. CONTENTS Special properties resulting from nanodimensionality; Nanoparticle technologies; Control of molecular assemblies; Functional organic inorganic nanocomposites; Molecular modelling of nanomorphology in polymers; Nanodimensionality and ionic transport; Multi scale simulation of nanionic polymer systems; Nanoengineering in metallic systems; Characterisation of nanometallic systems with NMR; Mechanical behaviour of metallic nanolaminates; Mechanics of nanocomposite structures; Preparation, properties and performance of Nanocrystalline ceramics; Novel properties from nanoceramics; Hydrogen storage in nanostructured materials; Nanofabrication.
Download or read book Processing and Properties of Structural Nanomaterials written by Leon L. Shaw and published by Wiley-TMS. This book was released on 2003-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from a November 2003 symposium report on recent progress in the understanding of and applications related to processing and properties of structural nanomaterials, in the areas of modeling and simulation, structure and property relationships, and processing and microstructure development. Synthesis and processing, characterization of structure and mechanical properties, structure and property relationships, thermal stability, and phase transformations are some themes examined. Specific topics include grain size distribution and mechanical properties of nanostructure materials, strength design of maps for nanolayered composites, and metal-metal type alloys. Annotation : 2004 Book News, Inc., Portland, OR (booknews.com).
Download or read book Advanced Mechanical Properties and Deformation Mechanisms of Bulk Nanostructured Materials written by Yong Hao Zhao and published by Trans Tech Publications Ltd. This book was released on 2011-05-17 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only
Download or read book Bulk Nanostructured Materials with Multifunctional Properties written by I. Sabirov and published by Springer. This book was released on 2015-09-01 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a multifunctional approach to the design of bulk nanostructured metals through severe plastic deformation (SPD). Materials engineering has traditionally involved selecting a suitable material for a given application. However, modern engineering frequently requires materials with a set of multifunctional, often conflicting properties: Enhanced mechanical properties need to be combined with improved physical (electrical, magnetic, etc.) and/or chemical (corrosion resistance, biocompatibility) properties. So disparate materials properties need to be engineered and optimized simultaneously. These requirements have created a paradigm shift in which the classical materials selection approach is replaced by design of material microstructures to achieve certain performance requirements, subject to constraints on individual properties such as strength, conductivity, and corrosion resistance. Written by researchers at the forefront of this new materials design approach, the present volume provides a comprehensive introduction to multifunctional design of bulk nanostructured materials, with applications ranging from hydrogen storage to construction engineering.
Download or read book Nanomaterials and Their Applications written by Zishan Husain Khan and published by Springer. This book was released on 2017-10-20 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the latest advances in the field of nanomaterials and their applications, and provides a comprehensive overview of the state-of-the-art of research in this rapidly developing field. The book comprises chapters exploring various aspects of nanomaterials. Given the depth and breadth of coverage, the book offers a valuable guide for researchers and students working in the area of nanomaterials.
Download or read book Nanostructured Materials written by Jackie Ying and published by Academic Press. This book was released on 2001-12-14 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thematic volume of Advances in Chemical Engineering presents the latest advances in the exciting interdisciplinary field of nanostructured materials. Written by chemical engineers, chemists, physicists, materials scientists, and bioengineers, this volume focuses on the molecular engineering of materials at the nanometer scale for unique size-dependent properties. It describes a "bottom-up" approach to designing nanostructured systems for a variety of chemical, physical, and biological applications.
Download or read book Mechanical Behaviour of Nanostructured Materials written by D.G. Morris and published by Trans Tech Publications Ltd. This book was released on 1998-04-06 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation of nanocrystalline materials has been an extremely active field during the past two decades as it promises to yield new and exciting properties, which will both test the scientific understanding of the behaviour of materials in general, and offer new scope for applications. While considerable progress has been made in basic understanding, the shift from fundamental science to technological application has been slow, especially with regard to exploitation of the mechanical behaviour of these materials.
