Download or read book Mechanical Processing of Sintered Materials written by Saranjit Singh and published by Sciendo. This book was released on 2020-10-20 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical processing of sintered materials in the form of metal powder preforms includes techniques such as sinter-forging, sinter-extrusion, sinter-rolling etc. One technique, which has aroused interest globally for producing high performance components economically, is sinter-forging, which combines the advantages associated with powder metallurgy and conventional forging techniques. The process is attractive because it avoids large number of operations, high scrap losses and energy consumption associated with conventional manufacturing processes. The technology, though have been extensively applied throughout the world for manufacture of numerous components, still requires to be explored from several perspectives. The objective of the present book is to study, explore and investigate the deformation characteristics during mechanical processing of the sintered materials.

Download or read book Mechanical Processing of Sintered Materials written by Saranjit Singh and published by Sciendo Migration. This book was released on 2020-10-30 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical processing of sintered materials in the form of metal powder preforms includes techniques such as sinter-forging, sinter-extrusion, sinter-rolling etc. One technique, which has aroused interest globally for producing high performance components economically, is sinterforging, which combines the advantages associated with powder metallurgy and conventional forging techniques. The process is attractive because it avoids large number of operations, high scrap losses and energy consumption associated with conventional manufacturing processes. The technology, though have been extensively applied throughout the world for manufacture of numerous components, still requires to be explored from several perspectives. The objective of the present book is to study, explore and investigate the deformation characteristics during mechanical processing of the sintered materials.

Download or read book Spark Plasma Sintering of Materials written by Pasquale Cavaliere and published by Springer. This book was released on 2019-02-18 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes spark plasma sintering (SPS) in depth. It addresses fundamentals and material-specific considerations, techniques, and applications across a broad spectrum of materials. The book highlights methods used to consolidate metallic or ceramic particles in very short times. It highlights the production of complex alloys and metal matrix composites with enhanced mechanical and wear properties. Emphasis is placed on the speed of the sintering processes, uniformity in product microstructure and properties, reduced grain growth, the compaction and sintering of materials in one processing step, various materials processing, and high energy efficiency. Current and potential applications in space science and aeronautics, automation, mechanical engineering, and biomedicine are addressed throughout the book.

Download or read book Powder Metallurgy Processing written by Howard Kuhn and published by Elsevier. This book was released on 2012-12-02 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder Metallurgy Processing: New Techniques and Analyses covers the application of advanced analytical techniques in metallurgy, mechanics, and economics to the fundamentals of powder fabrication processes. The book discusses powder production by gas and water atomization of liquid metals; the triaxial stress state compaction of powders; and the diffusional homogenization of compacted blends of powders. The text also describes the deformation processing of sintered powder materials; the analysis of mechanical property-structure relations in powder forgings; and the economic risk analysis of a miniplant for production of steel strip from powder. Chemical engineers and metallurgists and students taking related courses will find the book invaluable.

Download or read book Thermo Mechanical Processing of Metallic Materials written by Bert Verlinden and published by Elsevier. This book was released on 2007-06-07 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-Mechanical Processing of Metallic Materials describes the science and technology behind modern thermo-mechanical processing (TMP), including detailed descriptions of successful examples of its application in the industry. This graduate-level introductory resource aims to fill the gap between two scientific approaches and illustrate their successful linkage by the use of suitable modern case studies. The book is divided into three key sections focusing on the basics of metallic materials processing. The first section covers the microstructural science base of the subject, including the microstructure determined mechanical properties of metals. The second section deals with the current mechanical technology of plastic forming of metals. The concluding section demonstrates the interaction of the first two disciplines in a series of case studies of successful current TMP processing and looks ahead to possible new developments in the field. This text is designed for use by graduate students coming into the field, for a graduate course textbook, and for Materials and Mechanical Engineers working in this area in the industry. * Covers both physical metallurgy and metals processing* Links basic science to real everyday applications* Written by four internationally-known experts in the field

Download or read book Mechanical Properties in Progressive Mechanically Processed Metallic Materials written by Radim Kocich and published by MDPI. This book was released on 2021-02-24 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demands on innovative materials given by the ever-increasing requirements of contemporary industry require the use of high-performance engineering materials. The properties of materials and alloys are a result of their structures, which can primarily be affected by the preparation/production process. However, the production of materials featuring high levels of the required properties without the necessity to use costly alloying elements or time- and money-demanding heat treatment technologies typically used to enhance the mechanical properties of metallic materials (especially specific strength) still remains a challenge. The introduction of thermomechanical treatment represented a breakthrough in grain refinement, consequently leading to significant improvement of the mechanical properties of metallic materials. Contrary to conventional production technologies, the main advantage of such treatment is the possibility to precisely control structural phenomena that affect the final mechanical and utility properties. Thermomechanical treatment can only decrease the grain size to the scale of microns. However, further research devoted to pushing materials’ performance beyond the limits led to the introduction of severe plastic deformation (SPD) methods providing producers with the ability to acquire ultra-fine-grained and nanoscaled metallic materials with superior mechanical properties. SPD methods can be performed with the help of conventional forming equipment; however, many newly designed processes have also been introduced.

Download or read book Advanced Methods in Materials Processing Defects written by M. Predeleanu and published by Elsevier. This book was released on 1997-06-18 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers focus on advanced methods for predicting and avoiding the occurrence of defects in manufactured products. A new feature is included, namely, the influence of the processing-induced defects on the integrity of structures.The following topics are developed: damage modeling; damage evaluation and rupture; strain localization and instability analysis; formability characterization; prediction of shape inaccuracies; influence of defects on structural integrity. The main manufacturing operations are covered and various materials are examined, such as new and conventional metal alloys, ceramics, polymers and composites.

Download or read book Sintering written by Suk-Joong L. Kang and published by Elsevier. This book was released on 2004-11-27 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is the process of forming materials and components from a powder under the action of thermal energy. It is a key materials science subject: most ceramic materials and many specialist metal powder products for use in key industries such as electronics, automotive and aerospace are formed this way. Written by one of the leading experts in the field, this book offers an unrivalled introduction to sintering and sintering processes for students of materials science and engineering, and practicing engineers in industry. The book is unique in providing a complete grounding in the principles of sintering and equal coverage of the three key sintering processes: densification, grain growth and microstructure. Students and professional engineers alike will be attracted by the emphasis on developing a detailed understanding of the theory and practical processes of sintering, the balanced coverage of ceramic and metal sintering, and the accompanying examination questions with selected solutions. - Delivering unrivalled depth of coverage on the basis of sintering, science, including thermodynamics and polycrystalline microstructure. - Unique in its balanced coverage of the three key sintering elements - densification, grain growth and microstructure. - A key reference for students and engineers in materials science and engineering, accompanied by examination questions and selected solutions.

Download or read book Densification of Metal Powders During Sintering written by V. A. Invenson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering of powder metal compacts is one of the basic oper ations in powder metallurgy. The useful properties of a machine part are obtained after considerable densification of the sintered material. Although the mechanical properties of the part depend on other structural factors besides porosity, porosity is the main factor. Usually, the practical problem in sintering is to obtain a part with the desired or permissible porosity. Thus, knowledge of the laws governing densification and its final result is neces sary to control this process in the production of powder metal parts. The laws governing densification are also important for a more exact physical theory of sintering, which is still in the initial stages of its development. Such processes as the change in the density of lattice defects and the flow of crystalline substances during sintering have not yet received a complete physical inter pretation. Analysis of the laws of sintering may provide addition al material for more complete phenomenological characteristics of these processes that will be useful for further development of theoretical concepts of the flow of imperfect crystals under small loads. Although a substantial amount of experimental material has been accumulated, generalizations are still difficult.

Download or read book Advancements in Powder Metallurgy Processing Applications and Properties written by Rajendrachari, Shashanka and published by IGI Global. This book was released on 2024-02-27 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancements in Powder Metallurgy: Processing, Applications, and Properties addresses a critical issue in academic scholarship by providing a comprehensive resource that has been lacking in the field. Existing books often fall short by merely covering the basics of powder preparation, sintering methods, and general applications, leaving scholars with a limited understanding of the subject. This knowledge gap has hindered innovative research and slowed the progress of metallurgy and mechanical engineering. However, with this groundbreaking book, the tide is turning. The book brings together twenty-one chapters authored by renowned pioneers in the field, delving deep into the realm of mechanical alloying. It covers the evolution of this technique, various alloy preparation methods, their advantages and limitations, and the synthesis of nanostructured materials. Unlike other resources, this volume goes beyond the basics and comprehensively covers the fabrication of a wide range of alloys, including biomaterials, hybrid nanomaterials, smart materials, super alloys, and ceramic materials, all achieved through the transformative process of mechanical alloying. By consolidating essential information in one resource, Advancements in Powder Metallurgy: Processing, Applications, and Properties fills a significant gap in the existing literature. It equips academic scholars and engineering students with the necessary knowledge to unlock the full potential of mechanical alloying and make meaningful contributions to the field. With its emphasis on simplicity and accessibility, this book promises to inspire a new wave of research, reignite interest in metallurgy and mechanical engineering, and empower scholars to explore novel applications and contribute to the advancements in this field.

Download or read book Sintering of Advanced Materials written by Zhigang Zak Fang and published by Elsevier. This book was released on 2010-09-27 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is a method for manufacturing components from ceramic or metal powders by heating the powder until the particles adhere to form the component required. The resulting products are characterised by an enhanced density and strength, and are used in a wide range of industries. Sintering of advanced materials: fundamentals and processes reviews important developments in this technology and its applicationsPart one discusses the fundamentals of sintering with chapters on topics such as the thermodynamics of sintering, kinetics and mechanisms of densification, the kinetics of microstructural change and liquid phase sintering. Part two reviews advanced sintering processes including atmospheric sintering, vacuum sintering, microwave sintering, field/current assisted sintering and photonic sintering. Finally, Part three covers sintering of aluminium, titanium and their alloys, refractory metals, ultrahard materials, thin films, ultrafine and nanosized particles for advanced materials.With its distinguished editor and international team of contributors, Sintering of advanced materials: fundamentals and processes reviews the latest advances in sintering and is a standard reference for researchers and engineers involved in the processing of ceramics, powder metallurgy, net-shape manufacturing and those using advanced materials in such sectors as electronics, automotive and aerospace engineering. - Explores the thermodynamics of sintering including sinter bonding and densification - Chapters review a variety of sintering methods including atmosphere, vacuum, liquid phase and microwave sintering - Discusses sintering of a variety of materials featuring refractory metals, super hard materials and functionally graded materials

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources

Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas.Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials.Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. - Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques - Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys - Reviews the manufacture and densification of PM components and explores joining techniques

Download or read book Fatigue of Sintered Materials written by Srečko Glodež and published by Cambridge Scholars Publishing. This book was released on 2021-05-26 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder Metallurgy (PM) is a general term which represents all techniques to produce solid-metal-based products from powders. PM (sintered) components are used widely in the engineering practice, particularly in the automotive industry. When determining the load capacity of dynamically loaded machine parts and structures made of sintered materials, the fatigue behaviour of critical areas should be considered, including crack initiation and the crack propagation period. In this book, the theoretical background of both PM-technology for producing sintered parts and the fatigue phenomenon of dynamically loaded components are described in detail. In the application part, some aspects of the Fe- and Al-powder morphology and its influence on the basic characteristics of sintered products are analysed, before the fatigue behaviour of diffusion alloyed Cu-Ni-Mo sintered steel is presented, considering the additional heat treatment effects on the fatigue strength. Furthermore, the fatigue analysis of sintered gears is also investigated. In that respect, this book represents a significant contribution to the database of the fatigue phenomenon of sintered machine parts and structural components.

Download or read book Sintering Applications written by Burcu Ertug and published by BoD – Books on Demand. This book was released on 2013-02-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is one of the final stages of ceramics fabrication and is used to increase the strength of the compacted material. In the Sintering of Ceramics section, the fabrication of electronic ceramics and glass-ceramics were presented. Especially dielectric properties were focused on. In other chapters, sintering behaviour of ceramic tiles and nano-alumina were investigated. Apart from oxides, the sintering of non-oxide ceramics was examined. Sintering the metals in a controlled atmosphere furnace aims to bond the particles together metallurgically. In the Sintering of Metals section, two sections dealt with copper containing structures. The sintering of titanium alloys is another topic focused in this section. The chapter on lead and zinc covers the sintering in the field of extractive metallurgy. Finally two more chapter focus on the basics of sintering,i.e viscous flow and spark plasma sintering.

Download or read book Mechanics And Mechanical Engineering Proceedings Of The 2015 International Conference Mme2015 written by Maosen Cao and published by World Scientific. This book was released on 2016-07-14 with total page 1398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings consists of 162 selected papers presented at the 2nd Annual International Conference on Mechanics and Mechanical Engineering (MME2015), which was successfully held in Chengdu, China between December 25-27, 2015.MME2015 is one of the key international conferences in the fields of mechanics, mechanical engineering. It offers a great opportunity to bring together researchers and scholars around the globe to deliver the latest innovative research and the most recent developments in the field of Mechanics and Mechanical Engineering.MME2015 received over 400 submissions from about 600 laboratories, colleges and famous institutes. All the submissions have undergone double blind reviewed to assure the quality, reliability and validity of the results presented. These papers are arranged into 6 main chapters according to their research fields. These are: 1) Applied Mechanics 2) Mechanical Engineering and Manufacturing Technology 3) Material Science and Material Engineering 4) Automation and Control Engineering 5) Electrical Engineering 6) System Modelling and Simulation.This proceedings will be invaluable to academics and professionals interested in Mechanics and Mechanical Engineering.

Download or read book TMS 2012 141st Annual Meeting and Exhibition Materials Processing and Interfaces written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2012-05-02 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers relating to materials processing andinterfaces presented at various symposia at the 2012 TMSAnnual Meeting.