Download or read book Modern Mechanics and Applications written by Nguyen Tien Khiem and published by Springer Nature. This book was released on 2021-09-06 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book includes a selection of refereed papers presented at the International Conference on Modern Mechanics and Applications (ICOMMA) 2020, which took place in Ho Chi Minh City, Vietnam, on December 2–4, 2020. The contributions highlight recent trends and applications in modern mechanics. Subjects covered include biological systems; damage, fracture, and failure; flow problems; multiscale multi-physics problems; composites and hybrid structures; optimization and inverse problems; lightweight structures; mechatronics; dynamics; numerical methods and intelligent computing; additive manufacturing; natural hazards modeling. The book is intended for academics, including graduate students and experienced researchers interested in recent trends in modern mechanics and application.
Download or read book Modern Trends in Structural and Solid Mechanics 2 written by Noel Challamel and published by John Wiley & Sons. This book was released on 2021-06-08 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprised of three separate volumes presents the recent developments and research discoveries in structural and solid mechanics; it is dedicated to Professor Isaac Elishakoff. This second volume is devoted to the vibrations of solid and structural members. Modern Trends in Structural and Solid Mechanics 2 has broad scope, covering topics such as: exact and approximate vibration solutions of rods, beams, membranes, plates and three-dimensional elasticity problems, Bolotins dynamic edge effect, the principles of plate theories in dynamics, nano- and microbeams, nonlinear dynamics of shear extensible beams, the vibration and aeroelastic stability behavior of cellular beams, the dynamic response of elastoplastic softening oscillators, the complex dynamics of hysteretic oscillators, bridging waves, and the three-dimensional propagation of waves. This book is intended for graduate students and researchers in the field of theoretical and applied mechanics.
Download or read book Some Complex Phenomena in Fluid and Solid Mechanics written by Abdelghani Saouab and published by John Wiley & Sons. This book was released on 2024-10-30 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a tribute to Professor Abdelhak Ambari and brings together ten chapters written by colleagues who were fortunate enough to work with him. The contributions presented in this book cover the research themes in which Abdelhak Ambari was interested, and to which he made valuable experimental and theoretical contributions. For example: rheology of complex fluids and polymers; hydrodynamic interactions; flows at low Reynolds numbers; characterization of porous media; hydrodynamic instabilities and solid mechanics; electrochemical metrology. Some Complex Phenomena in Fluid and Solid Mechanics is aimed at a wide community of readers wishing to delve deeper into these scientific themes: since it is oriented toward the world of research, it will be a valuable tool for doctoral students and beyond. The book also provides undergraduate and graduate students with a good introduction to the techniques and approaches developed in fundamental and applied research in the fields of fluid mechanics, solid mechanics and instrumentation.
Download or read book Non Linear Finite Element Analysis in Structural Mechanics written by Wilhelm Rust and published by Springer. This book was released on 2015-02-18 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph describes the numerical analysis of non-linearities in structural mechanics, i.e. large rotations, large strain (geometric non-linearities), non-linear material behaviour, in particular elasto-plasticity as well as time-dependent behaviour, and contact. Based on that, the book treats stability problems and limit-load analyses, as well as non-linear equations of a large number of variables. Moreover, the author presents a wide range of problem sets and their solutions. The target audience primarily comprises advanced undergraduate and graduate students of mechanical and civil engineering, but the book may also be beneficial for practising engineers in industry.
Download or read book Theoretical and Applied Mechanics written by Mario Di Paola and published by Materials Research Forum LLC. This book was released on 2023-04-25 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the proceedings of the XXV National Congress of the Italian Association of Theoretical and Applied Mechanics (Palermo, September 2022). The topics cover theoretical, computational, experimental and technical-applicative aspects. Chapters: Fluid Mechanics, Solid Mechanics, Structural Mechanics, Mechanics of Machine, Computational Mechanics, Biomechanics, Masonry Modelling and Analysis, Dynamical Systems in Civil and Mechanical Structures, Control and Experimental Dynamics, Mechanical Modelling of Metamaterials and Periodic Structures, Novel Stochastic Dynamics, Signal Processing Techniques for Civil Engineering Applications, Vibration-based Monitoring and Dynamic Identification of Historic Constructions, Modeling and Analysis of Nanocomposites and Small-Scale Structures, Gradient Flows in Mechanics and Continuum Physics, Multibody Systems Vibration Analysis, Mechanics of Renewable Energy Systems, Mathematical Modeling and Experimental Techniques for Quantification and Prediction of Fluid Dynamic Noise, and Advanced Process Mechanics. Keywords: Fluid Mechanics, Solid Mechanics, Structural Mechanics, Mechanics of Machine, Computational Mechanics, Biomechanics, Masonry Modelling and Analysis, Dynamical Systems in Civil and Mechanical Structures, Control and Experimental Dynamics, Mechanical Modelling of Metamaterials and Periodic Structures, Novel Stochastic Dynamics, Signal Processing Techniques for Civil Engineering Applications, Vibration-based Monitoring and Dynamic Identification of Historic Constructions, Modeling and Analysis of Nanocomposites and Small-Scale Structures, Gradient Flows in Mechanics and Continuum Physics, Multibody Systems Vibration Analysis, Mechanics of Renewable Energy Systems, Mathematical Modeling and Experimental Techniques for Quantification and Prediction of Fluid Dynamic Noise, and Advanced Process Mechanics.
Download or read book Structural Mechanics Modelling and Analysis of Frames and Trusses written by Karl-Gunnar Olsson and published by John Wiley & Sons. This book was released on 2015-11-30 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook covers the fundamental theory of structural mechanics and the modelling and analysis of frame and truss structures Deals with modelling and analysis of trusses and frames using a systematic matrix formulated displacement method with the language and flexibility of the finite element method Element matrices are established from analytical solutions to the differential equations Provides a strong toolbox with elements and algorithms for computational modelling and numerical exploration of truss and frame structures Discusses the concept of stiffness as a qualitative tool to explain structural behaviour Includes numerous exercises, for some of which the computer software CALFEM is used. In order to support the learning process CALFEM gives the user full overview of the matrices and algorithms used in a finite element analysis
Download or read book Handbook of Mechanical Stability in Engineering written by Vladimir Isaevich Slivker and published by World Scientific. This book was released on 2013 with total page 1653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Mechanical Stability in Engineering (In 3 Volumes) is a systematic presentation of mathematical statements and methods of solution for problems of structural stability. It also presents a connection between the solutions of the problems and the actual design practice.This comprehensive multi-volume set with applications in Applied Mechanics, Structural, Civil and Mechanical Engineering and Applied Mathematics is useful for research engineers and developers of CAD/CAE software who investigate the stability of equilibrium of mechanical systems; practical engineers who use the software tools in their daily work and are interested in knowing more about the theoretical foundations of the strength analysis; and for advanced students and faculty of university departments where strength-related subjects of civil and mechanical engineering are taught.
Download or read book Fundamentals of Structural Mechanics written by Alberto Taliercio and published by Società Editrice Esculapio. This book was released on 2023-02-07 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides readers with the fundamental concepts that underlie the study of any problem of structural mechanics in the linear elastic field. The first part is devoted to the analysis of plane assemblages of beams (including frames, which are widely used in various fields of engineering); the problem of buckling of compressed bars is also dealt with. The second part is devoted to three-dimensional solids of any shape, with particular emphasis on beam-like solids subjected to any combination of external loads. The main criteria used in the Allowable Stress Design method for 3D solids are presented. The book is especially conceived for students of various engineering courses, such as civil, building, mechanical and aerospace engineering.
Download or read book Phenomenological and Mathematical Modelling of Structural Instabilities written by Marcello Pignataro and published by Springer Science & Business Media. This book was released on 2007-07-15 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of structural instability plays a role of primary importance in the field of applied mechanics. Despite the remarkable progresses made in the recent past years, the structural instability remains one of the most challenging topics in applied - chanics. Many problems have bee:: solved in the last decades but still many others remain to be solved satisfactorily. The increasing number of papers published in jo- nals and conferences organized by ECCS, SSRC, IUTAM, and EUROMECH strongly indicates the interest of scientists and engineers in the subject. A careful examination of these publications shows that they tend to fall into one of the two categories. The first is that of practical design direction in which methods for analyzing specific stability problems related to some specific structural typologies are developed. The research works are restricted to determining the critical load, considering that it is sufficient to know the limits of stability range. These studies are invaluable since their aim is to provide solutions to practical problems, to supply the designer with data useful for design and prepare norms, specifications and codes. The second direction is that of theoretical studies, aiming at a mathematical modeling of the instability problems, for a better understanding of the phenomena. In these studies, special emphasis is placed on the behavior of structures after the loss of stability in the post-critical range. This approach is less familiar to designers as its results have not yet become part of current structural design practice.
Download or read book Linear and Nonlinear Structural Mechanics written by Ali H. Nayfeh and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Explains the physical meaning of linear and nonlinear structural mechanics. * Shows how to perform nonlinear structural analysis. * Points out important nonlinear structural dynamics behaviors. * Provides ready-to-use governing equations.
Download or read book Structural Engineering Mechanics and Computation written by A. Zingoni and published by Elsevier. This book was released on 2001-03-16 with total page 1704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following on from the International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town in April 2001, this book contains the Proceedings, in two volumes. There are over 170 papers written by Authors from around 40 countries worldwide. The contributions include 6 Keynote Papers and 12 Special Invited Papers. In line with the aims of the SEMC 2001 International Conference, and as may be seen from the List of Contents, the papers cover a wide range of topics under a variety of themes. There is a healthy balance between papers of a theoretical nature, concerned with various aspects of structural mechanics and computational issues, and those of a more practical nature, addressing issues of design, safety and construction. As the contributions in these Proceedings show, new and more efficient methods of structural analysis and numerical computation are being explored all the time, while exciting structural materials such as glass have recently come onto the scene. Research interest in the repair and rehabilitation of existing infrastructure continues to grow, particularly in Europe and North America, while the challenges to protect human life and property against the effects of fire, earthquakes and other hazards are being addressed through the development of more appropriate design methods for buildings, bridges and other engineering structures.
Download or read book Dynamic Stability and Bifurcation in Nonconservative Mechanics written by Davide Bigoni and published by Springer. This book was released on 2018-07-09 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers a unified view on classical results and recent advances in the dynamics of nonconservative systems. The theoretical fundamentals are presented systematically and include: Lagrangian and Hamiltonian formalism, non-holonomic constraints, Lyapunov stability theory, Krein theory of spectra of Hamiltonian systems and modes of negative and positive energy, anomalous Doppler effect, reversible systems, sensitivity analysis of non-self-adjoint operators, dissipation-induced instabilities, local and global instabilities. They are applied to engineering situations such as the coupled mode flutter of wings, flags and pipes, flutter in granular materials, piezoelectric mechanical metamaterials, wave dynamics of infinitely long structures, radiative damping, stability of high-speed trains, experimental realization of follower forces, soft-robot locomotion, wave energy converters, friction-induced instabilities, brake squeal, non-holonomic sailing, dynamics of moving continua, and stability of bicycles and walking robots. The book responds to a demand in the modern theory of nonconservative systems coming from the growing number of scientific and engineering disciplines including physics, fluid and solids mechanics, fluid-structure interactions, and modern multidisciplinary research areas such as biomechanics, micro- and nanomechanics, optomechanics, robotics, and material science. It is targeted at both young and experienced researchers and engineers working in fields associated with the dynamics of structures and materials. The book will help to get a comprehensive and systematic knowledge on the stability, bifurcations and dynamics of nonconservative systems and establish links between approaches and methods developed in different areas of mechanics and physics and modern applied mathematics.
Download or read book Computational Mechanics 88 written by S.N. Atluri and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 1775 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this Conference was to become a forum for discussion of both academic and industrial research in those areas of computational engineering science and mechanics which involve and enrich the rational application of computers, numerical methods, and mechanics, in modern technology. The papers presented at this Conference cover the following topics: Solid and Structural Mechanics, Constitutive Modelling, Inelastic and Finite Deformation Response, Transient Analysis, Structural Control and Optimization, Fracture Mechanics and Structural Integrity, Computational Fluid Dynamics, Compressible and Incompressible Flow, Aerodynamics, Transport Phenomena, Heat Transfer and Solidification, Electromagnetic Field, Related Soil Mechanics and MHD, Modern Variational Methods, Biomechanics, and Off-Shore-Structural Mechanics.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Mechanical Engineering and Material Science written by Ketul C. Popat and published by Springer Nature. This book was released on 2022-04-22 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the 1st International Conference on Advances in Mechanical Engineering and Material Science (ICAMEMS 2022). It discusses about the diverse technological advancements, innovations, and achievements in the areas of mechanical engineering and material science. It also covers the developments and challenges in the field of machine design, manufacturing, thermal and fluid engineering. Important topics covered in the conference include advanced manufacturing processes, machining, product design and development, mechatronics and robotics, non-conventional energy resources, green energy and energy harvesting, tribology, materials and characterization. The book also discusses advanced research areas in material science such as smart materials, bio-materials and advanced energy materials. Given the contents, the book will be a valuable reference for students, researchers and industrialists interested in advanced research areas of mechanical engineering and material science.
Download or read book Fundamentals of Structural Stability written by George Simitses and published by Elsevier. This book was released on 2006-01-27 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability of a structural assembly to carry loads and forces determines how stable it will be over time. Viewing structural assemblages as comprising columns, beams, arches, rings, and plates, this book will introduce the student to both a classical and advanced understanding of the mechanical behavior of such structural systems under load and how modeling the resulting strains can predict the overall future performance—the stability—of that structure. While covering traditional beam theory, the book is more focused on elastica theory in keeping with modern approaches. This text will be an expanded and updated version a similar, previously published book, but with pedagogical improvements and updated analytical methods.This engineering textbook will provide a focused treatment on the study of how structures behave and perform when under stress loading, including plastic deformation and buckling. All advanced engineering students studying engineering mechanics, structural analysis and design, fatigue and failure, and other related subjects need to have this knowledge, and this book will provide it in a thorough and coherent fashion. Written by two of the world's leading engineering professors in this subject area, the pedagogy has been classroom-tested over many years and should find a receptive readership among both students and instructors. - An understandable introduction to the theory of structural stability, useful for a wide variety of engineering disciplines, including mechanical, civil and aerospace engineering - Covers both static and dynamic loads, for both conservative and nonconservative systems - Emphasizes elastic behavior under loads, including vertical buckling, torsional buckling and nonlinear affects of structural system buckling and stability - Case examples to illustrate real-world applications of Stability Theory
Download or read book Physics of Intensity Dependent Beam Instabilities written by King-Yuen Ng and published by World Scientific. This book was released on 2006 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive treatment of intensity dependent particle beam instabilities in accelerating rings. Written for researchers, the material is also suitable for use as a textbook in an advanced graduate course for students studying accelerator physics. The presentation starts with a brief review of the basic concept of wake potentials and coupling impedances in the vacuum chamber followed by a discussion on static and dynamic solutions of their effects on the particle beams. Special emphasis is placed separately on proton and electron machines. Other special topics of interest covered include Landau damping, BalakinOCoNovokhatskyOCoSmirnov damping, Sacherer''s integral equations, Landau cavity, saw-tooth instability, Robinson stability criteria, beam loading, transition crossing, two-stream instabilities, and collective instability issues of isochronous rings. After the formulation of an instability, readers are provided a thorough description of one or more experimental observations together with a discussion of the cures for the instability. Although the book is theory oriented, the use of mathematics has been minimized. The presentation is intended to be rigorous and self-contained with nearly all the formulas and equations derived."
