Download or read book Mechanical Engineering Technologies and Applications Volume 2 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-11-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Mechanical Technology written by Dennis Henry Bacon and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised in line with the new Engineering syllabus. In particular the section on heat transfer has been expanded.
Download or read book Understanding Electro Mechanical Engineering written by Lawrence J. Kamm and published by John Wiley & Sons. This book was released on 1995-09-05 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on electromechanical systems in a variety of fields, this accessible introductory text brings you coverage of the full range of electrical mechanical devices used today. You'll gain a comprehensive understanding of the design process and get valuable insights into good design practice. UNDERSTANDING ELECTROMECHANICAL ENGINEERING will be of interest to anyone in need of a non-technical, interdisciplinary introduction to the thriving field of mechatronics.
Download or read book Engineering Technology Education in the United States written by National Academy of Engineering and published by National Academies Press. This book was released on 2017-01-27 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vitality of the innovation economy in the United States depends on the availability of a highly educated technical workforce. A key component of this workforce consists of engineers, engineering technicians, and engineering technologists. However, unlike the much better-known field of engineering, engineering technology (ET) is unfamiliar to most Americans and goes unmentioned in most policy discussions about the US technical workforce. Engineering Technology Education in the United States seeks to shed light on the status, role, and needs of ET education in the United States.
Download or read book Optical Principles and Technology for Engineers written by James Stewart and published by CRC Press. This book was released on 1996-04-23 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing the principles of physical and geometrical optics from an engineering point of view, this book explains current optical technology and the applications of optical methods in a wide variety of fields, from astronomy and agriculture to medicine and semiconductors. It offers guidance in the selection of optical components for the construction of bread-board models using commercially available, standard components, and provides immediately useful equations without unnecessary mathematical derivations.
Download or read book Materials and Technologies in Mechanical Engineering written by Dmitry А. Chinakhov and published by Trans Tech Publications Ltd. This book was released on 2018-10-30 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only
Download or read book Mechanical Engineering Principles written by John Bird and published by Routledge. This book was released on 2012-05-04 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Mechanical Engineering Principles offers a student-friendly introduction to core engineering topics that does not assume any previous background in engineering studies, and as such can act as a core textbook for several engineering courses. Bird and Ross introduce mechanical principles and technology through examples and applications rather than theory. This approach enables students to develop a sound understanding of the engineering principles and their use in practice. Theoretical concepts are supported by over 600 problems and 400 worked answers. The new edition will match up to the latest BTEC National specifications and can also be used on mechanical engineering courses from Levels 2 to 4"--
Download or read book Wave Technology in Mechanical Engineering written by R. F. Ganiev and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking volume covers the significant advantages of wave technologies in the development of innovative machine building where high technologies with appreciable economic effect are applied. These technologies cover many industries, including the oil-and-gas industry, refining and other chemical processing, petrochemical industry, production of new materials, composite and nano-composites including, construction equipment, environmental protection, pharmacology, power generation, and many others. The technological problem of grinding, fine-scale grinding and activation of solid particles (dry blends) is disclosed. This task is common for the production of new materials across these various industries. At present in this sphere the traditional methods have reached their limits and in some cases are economically ineffective from both scientific and practical points of view. The authors have detailed, through their extensive groundbreaking research, how these new methods, based on wave technology, can be used to create new, more efficient and less expensive applications and materials for industry. From increasing oil recovery to building stronger machines more efficiently and creating more productive membrane separation devices, wave technology can be used as a fertile ground for product innovation and more efficient methods of production across a variety of industries. This book is the only one of its kind in the world and offers a unique and invaluable glance into this sophisticated and complicated scientific area that is only now being more fully utilized for its valuable benefits.
Download or read book Springer Handbook of Mechanical Engineering written by Karl-Heinrich Grote and published by Springer Nature. This book was released on 2020-12-09 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.
Download or read book Newnes Mechanical Engineer s Pocket Book written by Roger Timings and published by Newnes. This book was released on 2013-10-22 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newnes Mechanical Engineer's Pocket Book is an easy to use pocket book intended to aid mechanical engineers engaged in design and manufacture and others who require a quick, day-to-day reference for useful workshop information. The book is a compilation of useful data, providing abstracts of many technical materials in various technical areas. The text is divided into five main parts: Engineering Mathematics and Science, Engineering Design Data, Engineering Materials, Computer Aided Engineering, and Cutting Tools. These main sections are further subdivided into topic areas that discuss such topics as engineering mathematics, power transmission and fasteners, mechanical properties, and polymeric materials. Mechanical engineers and those into mechanical design and shop work will find the book very useful.
Download or read book A History of Mechanical Engineering written by Ce Zhang and published by Springer Nature. This book was released on 2020-01-03 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the history of mechanical engineering since the Bronze Age. Focusing on machinery inventions and the development of mechanical technology, it also discusses the machinery industry and modern mechanical education. The evolution of machinery is divided into three stages: Ancient (before the European Renaissance), Modern (mainly including the two Industrial Revolutions) and Contemporary (since the Revolution in Physics, especially post Second World War). The book not only clarifies the development of mechanical engineering, but also reveals the driving forces behind it – e.g. the economy, national defense and human scientific research activities – to highlight the links between technology and society; mechanical engineering and the natural sciences; and mechanical engineering and related technological areas. Though mainly intended as a textbook or supplemental reading for graduate students, the book also offers a unique resource for researchers and engineers in mechanical engineering who wish to broaden their horizons.
Download or read book Landmarks in Mechanical Engineering written by and published by . This book was released on 1997 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machines, devices, and systems that have touched our lives, both intimately and for the public good, are often unheralded inventions that we take for granted or never even see. Fortunately, they claim landmark recognition by the American Society of Mechanical Engineers, which now makes these engineering marvels accessible to teachers and students, travelers, researchers, and the curious. The 135 historic mechanical engineering landmarks in this book represent the accomplishments of mechanical engineers over the past 250 years - from the steam engine of Thomas Newcomen (1712), which launched the Industrial Revolution, to the Saturn V rocket (1967). This roster of landmarks tells a magnificent story of people and places and of innovation and discovery.
Download or read book Integrated Computer Technologies in Mechanical Engineering 2020 written by Mykola Nechyporuk and published by Springer Nature. This book was released on 2021-01-18 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses conference topics such as information technology in the design and manufacture of engines; information technology in the creation of rocket space systems; aerospace engineering; transport systems and logistics; big data and data science; nano-modeling; artificial intelligence and smart systems; networks and communication; cyber-physical systems and IoE; and software engineering and IT infrastructure. The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering” – Synergetic Engineering (ICTM) was formed to bring together outstanding researchers and practitioners in the field of information technology, and whose work involves the design and manufacture of engines, creation of rocket space systems, and aerospace engineering, from all over the world to share their experiences and expertise. It was established by the National Aerospace University “Kharkiv Aviation Institute.” The ICTM’2020 conference was held in Kharkiv, Ukraine on October 28–30, 2020.
Download or read book Mechanism Analysis written by Lyndon O. Barton and published by CRC Press. This book was released on 2016-04-19 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated and enlarged Second Edition provides in-depth, progressive studies of kinematic mechanisms and offers novel, simplified methods of solving typical problems that arise in mechanisms synthesis and analysis - concentrating on the use of algebra and trigonometry and minimizing the need for calculus.;It continues to furnish complete coverag
Download or read book Mechanical Engineer s Reference Book written by Edward H. Smith and published by Butterworth-Heinemann. This book was released on 2013-09-24 with total page 1190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineer's Reference Book, 12th Edition is a 19-chapter text that covers the basic principles of mechanical engineering. The first chapters discuss the principles of mechanical engineering, electrical and electronics, microprocessors, instrumentation, and control. The succeeding chapters deal with the applications of computers and computer-integrated engineering systems; the design standards; and materials' properties and selection. Considerable chapters are devoted to other basic knowledge in mechanical engineering, including solid mechanics, tribology, power units and transmission, fuels and combustion, and alternative energy sources. The remaining chapters explore other engineering fields related to mechanical engineering, including nuclear, offshore, and plant engineering. These chapters also cover the topics of manufacturing methods, engineering mathematics, health and safety, and units of measurements. This book will be of great value to mechanical engineers.
Download or read book Applied Mechanics for Engineering Technology written by Keith M. Walker and published by Pearson. This book was released on 2013-09-17 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Applied Mechanics, Statics/Dynamics, or Introduction to Stress Analysis. Featuring a non-calculus approach, this introduction to applied mechanics text combines a straightforward, readable foundation in underlying physics principles with a consistent method of problem solving. It presents the physics principles in small elementary steps; keeps the mathematics at a reasonable level; provides an abundance of worked examples; and features problems that are as practical as possible without becoming too involved with many extraneous details. This edition features 7% more problems, an enhanced layout and design and a logical, disciplined approach that gives students a sound background in core statics and dynamics competencies.
Download or read book Materials Selection and Applications in Mechanical Engineering written by Aravamudhan Raman and published by . This book was released on 2007 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike any other text of its kind, Materials Selection and Applications in Mechanical Engineering contains complete and in-depth coverage on materials of use, their principles, processing and handling details; along with illustrative examples and sample projects. It clearly depicts the needed topics and gives adequate coverage with ample examples so that ME students can appreciate the relevance of materials to their discipline. Featuring the basic principles of materials selection for application in various engineering outcomes, the contents of this text follow those of the common first-level introductory course in materials science and engineering. Directed toward mechanical engineering, it introduces the materials commonly used in this branch, along with an exhaustive description of their properties that decide their functional characteristics and selection for use, typical problems encountered during application due to improper processing or handling of materials, non-destructive test procedures used in maintenance to detect and correct problems, and much more. What's more, numerous examples and project-type analyses to select proper materials for application are provided. With the use of this unique text, teaching a relevant second-level course in materials to ME majors has never been easier Covers all aspects of engineering materials necessary for their successful utilization in mechanical components and systems. Defines a procedure to evaluate the materials' performance efficiency in engineering applications and illustrates it with a number of examples. Includes sample project activities, along with a number of assignments for self exercise. Keeps chapters short and targeted toward specific topics for easy assimilation. Contains several unique chapters, including microprocessing, MEMS, problems encountered during use of materials in mechanical components, and NDT procedures used to detect common defects such as cracks, porosity and gas pockets, internal residual stresses, etc. Features commonly used formulae in mechanical system components in an appendix. Several tables containing material properties are included throughout the book.
