Download or read book Mechanical Engineering Technologies and Applications written by Zied Driss and published by Bentham Science Publishers. This book was released on 2021-11-09 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. The book contents include the following topics: Numerical analysis of hydrokinetic turbines Computational fluid dynamics of a CuO based nanofluid in mini-channel cross-sections Orthodontic biomechanics of a NiTi arch wires Reynold’s number effects on fluid flow through Savonius rotors Effect of operating parameters on Zn-Mn alloys deposited from additive-free chloride bath Optical properties and stability of a blue-emitting phosphor (Sr2P2O7:Eu2+) Under UV and VUV excitation Numerical study of the influence of nanofluid type on thermal improvement in a three dimensional mini channel Electrochemical studies and characterization of Zn-Mn coatings deposited in the presence of novel organic additives Prediction of fire and smoke propagation under a range of external conditions Structural design of a 10 kW H-Darrieus wind turbine The presented case studies and development approaches aim to provide the readers, such as graduate students, PhD candidates and professionals with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Mechanical Engineering Technologies and Applications Volume 2 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-11-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Mechanical Engineering Technologies and Applications written by ZIED. DRISS and published by . This book was released on 2021-11-09 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. The book contents include the following topics: Numerical analysis of hydrokinetic turbines Computational fluid dynamics of a CuO based nanofluid in mini-channel cross-sections Orthodontic biomechanics of a NiTi arch wires Reynold's number effects on fluid flow through Savonius rotors Effect of operating parameters on Zn-Mn alloys deposited from additive-free chloride bath Optical properties and stability of a blue-emitting phosphor (Sr2P2O7:Eu2+) Under UV and VUV excitation Numerical study of the influence of nanofluid type on thermal improvement in a three dimensional mini channel Electrochemical studies and characterization of Zn-Mn coatings deposited in the presence of novel organic additives Prediction of fire and smoke propagation under a range of external conditions Structural design of a 10 kW H-Darrieus wind turbine The presented case studies and development approaches aim to provide the readers, such as graduate students, PhD candidates and professionals with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Mechanical Engineering Technologies and Applications Volume 3 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-12-28 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 3 includes the following topics: Numerical simulations of three-dimensional laminar mixed convection heat transfer of water-based-Al2O3 nanofluid in an open cubic cavity with a heated block. Nonlinear formulations of Element-Free Galerkin Method (EFGM) for large deformation analysis of Ogden’s hyperelastic materials, emphasizing incompressibility and mesh distortion avoidance. Development of a 3D numerical model with LS-DYNA using a coupled SPH-FEM method to simulate hydraulic behavior of a Ski-Jump Spillway with dentates, showcasing precision through validation. Exploration of enhancing the inlet system of an LPG-H2 fueled engine using a static inclined blade turbine, analyzed through Computational Fluid Dynamics (CFD) simulations. Effective utilization of Artificial Neural Networks (ANN) in heat transfer applications, addressing issues like fouling in heat exchangers, showcasing their accuracy compared to experimental data. Investigation of the impact of nitrogen concentration on the structure and properties of ZrN coatings deposited by magnetron sputtering, evaluating variations in structural and mechanical properties. Forced convection in a horizontal cylindrical pipe with pseudoplastic fluid, considering uniform constant heat flux and uniform temperature as boundary conditions. Modeling and experimental study of a water solar collector coupled to an optimized solar still, aiming to enhance freshwater production in a solar distillation system under specific climatic conditions. Exploration of the effect of film thickness on the structure and properties of Ti-N films deposited by magnetron sputtering, utilizing theoretical and experimental analysis to confirm the rock salt TiN structure. The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology. Readership Graduate students, PhD candidates and professionals seeking basic and applied information related to mechanical engineering and technology.
Download or read book Engineering Technology Education in the United States written by National Academy of Engineering and published by National Academies Press. This book was released on 2017-01-27 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vitality of the innovation economy in the United States depends on the availability of a highly educated technical workforce. A key component of this workforce consists of engineers, engineering technicians, and engineering technologists. However, unlike the much better-known field of engineering, engineering technology (ET) is unfamiliar to most Americans and goes unmentioned in most policy discussions about the US technical workforce. Engineering Technology Education in the United States seeks to shed light on the status, role, and needs of ET education in the United States.
Download or read book Materials Selection and Applications in Mechanical Engineering written by Aravamudhan Raman and published by . This book was released on 2007 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike any other text of its kind, Materials Selection and Applications in Mechanical Engineering contains complete and in-depth coverage on materials of use, their principles, processing and handling details; along with illustrative examples and sample projects. It clearly depicts the needed topics and gives adequate coverage with ample examples so that ME students can appreciate the relevance of materials to their discipline. Featuring the basic principles of materials selection for application in various engineering outcomes, the contents of this text follow those of the common first-level introductory course in materials science and engineering. Directed toward mechanical engineering, it introduces the materials commonly used in this branch, along with an exhaustive description of their properties that decide their functional characteristics and selection for use, typical problems encountered during application due to improper processing or handling of materials, non-destructive test procedures used in maintenance to detect and correct problems, and much more. What's more, numerous examples and project-type analyses to select proper materials for application are provided. With the use of this unique text, teaching a relevant second-level course in materials to ME majors has never been easier Covers all aspects of engineering materials necessary for their successful utilization in mechanical components and systems. Defines a procedure to evaluate the materials' performance efficiency in engineering applications and illustrates it with a number of examples. Includes sample project activities, along with a number of assignments for self exercise. Keeps chapters short and targeted toward specific topics for easy assimilation. Contains several unique chapters, including microprocessing, MEMS, problems encountered during use of materials in mechanical components, and NDT procedures used to detect common defects such as cracks, porosity and gas pockets, internal residual stresses, etc. Features commonly used formulae in mechanical system components in an appendix. Several tables containing material properties are included throughout the book.
Download or read book Mechanical Systems written by Seifedine Kadry and published by Nova Science Publishers. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes eleven excellent chapters that have been prepared using state-of-art methodologies by professional researchers from ten different countries. The chapters in the book comprise the following titles: System Diagnostics and Prognostics: A Review; Random Vibro-Impact Vibration in Mechanical Systems, The Machine for Cutting Cane and Other Aquatic Plants in Navigable Waterways by Agustín de Betancourt y Molina: Analysis by Computer-Aided Engineering Techniques with an Autodesk Inventor Professional; Mechanical Systems and Microfluidics: The Application of a Vision System in the Testing of Fluids Behavior; The Study of Limited Invariant Sets and Structures of Relay Stabilized Systems; Finding an Unbiased Warranty Length for a Product Under Parametric Uncertainty of Underlying Lifetime Models; Modeling of Mechanical Aspects (Static, Dynamic) Influence on the Production of Electric Fuel Cell (PEMFC) Power; Quantum Graph-Type Models of the Helmholtz Resonator and Completeness of Resonance States; Applied Research in Forensic Engineering; Energy Efficiency via a Turbulator; and A Mathematical Model of a Rocket Engine for Reliability Analysis.
Download or read book Integrated Computer Technologies in Mechanical Engineering 2020 written by Mykola Nechyporuk and published by Springer Nature. This book was released on 2021-01-18 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses conference topics such as information technology in the design and manufacture of engines; information technology in the creation of rocket space systems; aerospace engineering; transport systems and logistics; big data and data science; nano-modeling; artificial intelligence and smart systems; networks and communication; cyber-physical systems and IoE; and software engineering and IT infrastructure. The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering” – Synergetic Engineering (ICTM) was formed to bring together outstanding researchers and practitioners in the field of information technology, and whose work involves the design and manufacture of engines, creation of rocket space systems, and aerospace engineering, from all over the world to share their experiences and expertise. It was established by the National Aerospace University “Kharkiv Aviation Institute.” The ICTM’2020 conference was held in Kharkiv, Ukraine on October 28–30, 2020.
Download or read book Rapid Prototyping and Engineering Applications written by Frank W. Liou and published by CRC Press. This book was released on 2007-09-26 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: More quality, more flexibility, and less costs seem to be the key to meeting the demands of the global marketplace. The secret to success in this arena lies in the expert execution of the critical tasks in the product definition stage. Prototyping is an essential part of this stage, yet can be very expensive. It must be planned well and use state-o
Download or read book Ultrasonics written by Dale Ensminger and published by CRC Press. This book was released on 2011-09-19 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in power electronics greatly benefit the multidisciplinary field of modern ultrasonics. More powerful, compact, and versatile electronic chips and software enable new computer-based devices for real-time data capture, storage, analysis, and display and advance the science and technology employed in commercial systems and applications of ultrasound. Reviewing the scientific basis behind these improvements, Ultrasonics: Fundamentals, Technologies, and Applications, Third Edition discusses them in detail, with new and additional figures and references, offering a completely revised and expanded examination of the state of modern ultrasonics. This new edition of a bestselling industry reference discusses the full breadth of ultrasonics applications for industrial and medical use and provides the fundamentals and insights gathered over the authors’ collective 80 years in the field. It provides a unique and comprehensive treatment of the science and technology behind the latest advancements and applications in both low and high power implementations. Coverage combines fundamental physics, a review and analysis of sensors and transducers, and the systems required for the full spectrum of industrial, nondestructive testing and medical and biomedical uses. It includes citations of numerous references and covers both main stream and the more unusual and obscure applications of ultrasound. Ultrasonics is ubiquitous in its industrial applications for sensing, NDT, and process measurements, in high power forms for processing and sonochemistry, as well as in medical procedures where it is used for diagnosis, therapy and surgery. This book provides a complete overview of the field, presenting numerous applications, cutting-edge advancements and improvements, additional figures and references, and a look at future directions.
Download or read book A Framework for K 12 Science Education written by National Research Council and published by National Academies Press. This book was released on 2012-02-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, engineering, and technology permeate nearly every facet of modern life and hold the key to solving many of humanity's most pressing current and future challenges. The United States' position in the global economy is declining, in part because U.S. workers lack fundamental knowledge in these fields. To address the critical issues of U.S. competitiveness and to better prepare the workforce, A Framework for K-12 Science Education proposes a new approach to K-12 science education that will capture students' interest and provide them with the necessary foundational knowledge in the field. A Framework for K-12 Science Education outlines a broad set of expectations for students in science and engineering in grades K-12. These expectations will inform the development of new standards for K-12 science education and, subsequently, revisions to curriculum, instruction, assessment, and professional development for educators. This book identifies three dimensions that convey the core ideas and practices around which science and engineering education in these grades should be built. These three dimensions are: crosscutting concepts that unify the study of science through their common application across science and engineering; scientific and engineering practices; and disciplinary core ideas in the physical sciences, life sciences, and earth and space sciences and for engineering, technology, and the applications of science. The overarching goal is for all high school graduates to have sufficient knowledge of science and engineering to engage in public discussions on science-related issues, be careful consumers of scientific and technical information, and enter the careers of their choice. A Framework for K-12 Science Education is the first step in a process that can inform state-level decisions and achieve a research-grounded basis for improving science instruction and learning across the country. The book will guide standards developers, teachers, curriculum designers, assessment developers, state and district science administrators, and educators who teach science in informal environments.
Download or read book Engineering Technology and Applications written by Fun Shao and published by CRC Press. This book was released on 2014-08-19 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Technology and Applications contains the contributions presented at the 2014 International Conference on Engineering Technology and Applications (ICETA 2014, Tsingtao, China, 29-30 April 2014). The book is divided into three main topics: – Civil and environmental engineering – Electrical and computer engineering – Mechanical engineering Considerable attention is also paid to big data, cloud computing, neural network algorithms and social network services. The book will be invaluable to professionals and academics in civil, environmental, electrical, computer and mechanical engineering.
Download or read book Fluid Sealing Technology written by Heinz K Muller and published by Routledge. This book was released on 2019-01-22 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Assists users, developers, researchers, and manufacturers in the design, selection, development, and application of seals and sealing systems for fluids."
Download or read book Mechanical Engineer s Reference Book written by Edward H. Smith and published by Butterworth-Heinemann. This book was released on 2013-09-24 with total page 1190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineer’s Reference Book, 12th Edition is a 19-chapter text that covers the basic principles of mechanical engineering. The first chapters discuss the principles of mechanical engineering, electrical and electronics, microprocessors, instrumentation, and control. The succeeding chapters deal with the applications of computers and computer-integrated engineering systems; the design standards; and materials’ properties and selection. Considerable chapters are devoted to other basic knowledge in mechanical engineering, including solid mechanics, tribology, power units and transmission, fuels and combustion, and alternative energy sources. The remaining chapters explore other engineering fields related to mechanical engineering, including nuclear, offshore, and plant engineering. These chapters also cover the topics of manufacturing methods, engineering mathematics, health and safety, and units of measurements. This book will be of great value to mechanical engineers.
Download or read book Mechanical Engineering and Technology written by Tianbiao Zhang and published by Springer Science & Business Media. This book was released on 2012-02-22 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011. Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings. This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation. We hope that researchers, graduate students and other interested readers benefit scientifically from the book and also find it stimulating in the process.
Download or read book Understanding Electro Mechanical Engineering written by Lawrence J. Kamm and published by John Wiley & Sons. This book was released on 1995-09-05 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on electromechanical systems in a variety of fields, this accessible introductory text brings you coverage of the full range of electrical mechanical devices used today. You'll gain a comprehensive understanding of the design process and get valuable insights into good design practice. UNDERSTANDING ELECTROMECHANICAL ENGINEERING will be of interest to anyone in need of a non-technical, interdisciplinary introduction to the thriving field of mechatronics.
Download or read book Belt Selection and Application for Engineers written by Wallace D. Erickson and published by CRC Press. This book was released on 1987-08-31 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
