Download or read book Mechanical Engineering Materials and Energy II written by Sally Gao and published by Trans Tech Publications Ltd. This book was released on 2013-01-11 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume contains selected, peer reviewed papers from the 2nd International Conference on Mechanical Engineering, Materials and Energy (ICMEME 2012), October 26-27, 2012, Dalian, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The papers are grouped as follows: Chapter 1: Mechatronics, Automation and Information Technologies; Chapter 2: Mechanical Engineering; Chapter 3: Material Science, Technology and Processing; Chapter 4: Energy Systems and Energy Saving; Chapter 5: Construction, Urban and Environment; Chapter 6: Economy and Engineering Management.

Download or read book Mechanical Engineering Materials and Energy written by Grace Chang and published by Trans Tech Publications Ltd. This book was released on 2011-12-22 with total page 1630 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are selected papers from the 2011 International Conference on Mechanical Engineering, Materials and Energy, ICMEME2011, held in Dalian. The papers reveal the latest developments, in the field of Mechanical Engineering, Materials and Energy ... from fundamentals to new technologies and applications. In particular, they cover the topics of Mechatronics and Automation, Mechanical Manufacturing Systems, Signal Processing, Manufacturing Technology and Processing and Materials Science and Technology.

Download or read book Mechanical Engineering Materials and Energy III written by Mohd Zulkifly Abdullah and published by Trans Tech Publications Ltd. This book was released on 2013-12-19 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 3rd International Conference on Mechanical Engineering, Materials and Energy (ICMEME 2013), November 9-10, 2013, Changsha, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 135 papers are grouped as follows: Chapter 1: Materials Science and Technology; Chapter 2: Mechanics, Energy, Thermal and Dynamic Systems; Chapter 3: Detection and Monitoring Systems; Chapter 4: Engineering Design, Optimization and Management; Chapter 5: Information Technology and Algorithms; Chapter 6: Control System Design and Evaluation

Download or read book Advancement in Materials Manufacturing and Energy Engineering Vol II written by Puneet Verma and published by Springer Nature. This book was released on 2022-01-18 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. II) presents select proceedings of the conference on “Advancement in Materials, Manufacturing, and Energy Engineering (ICAMME 2021).” It discusses the latest materials, manufacturing processes, evaluation of materials properties for the application in automotive, aerospace, marine, locomotive, and energy sectors. The topics covered include advanced metal forming, bending, welding and casting techniques, recycling and re-manufacturing of materials and components, materials processing, characterization and applications, materials, composites and polymer manufacturing, powder metallurgy and ceramic forming, numerical modeling and simulation, advanced machining processes, functionally graded materials, non-destructive examination, optimization techniques, engineering materials, heat treatment, material testing, MEMS integration, energy materials, bio-materials, metamaterials, metallography, nanomaterial, SMART materials, bioenergy, fuel cell, and superalloys. The book will be useful for students, researchers, and professionals interested in interdisciplinary topics in the areas of materials, manufacturing, and energy sectors.

Download or read book Applied Engineering Materials and Mechanics II written by Jong Wan Hu and published by Trans Tech Publications Ltd. This book was released on 2018-07-26 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd International Conference on Applied Engineering, Materials and Mechanics (3rd ICAEMM) Selected, peer reviewed papers from the 3rd International Conference on Applied Engineering, Materials and Mechanics (3rd ICAEMM 2018), April 20-22, 2018, Okinawa Island, Japan

Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.

Download or read book Mechanical Engineering Materials and Energy III written by and published by . This book was released on 2013 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 3rd International Conference on Mechanical Engineering, Materials and Energy (ICMEME 2013), November 9-10, 2013, Changsha, China. The 135 papers are grouped as follows: Chapter 1: Materials Science and Technology; Chapter 2: Mechanics, Energy, Thermal and Dynamic Systems; Chapter 3: Detection and Monitoring Systems; Chapter 4: Engineering Design, Optimization and Management; Chapter 5: Information Technology and Algorithms; Chapter 6: Control System Design and Evaluation Temporary description, more details to follow.

Download or read book Mechanical Engineering Materials and Information Technology II written by B. Xu and published by Trans Tech Publications Ltd. This book was released on 2014-10-01 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2014 2nd International Conference on Mechanical Engineering, Civil Engineering and Material Engineering (MECEM 2014), September 27-28, 2014, Wuhan, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 60 papers are grouped as follows: Chapter 1: Material Science and Chemical Engineering; Chapter 2: Construction and Environmental Engineering; Chapter 3: Machinery, Automation and Control; Chapter 4: Communication, Computational Algorithms and Applied Information Technology

Download or read book Advanced Research on Engineering Materials Energy Management and Control written by Helen Zhang and published by Trans Tech Publications Ltd. This book was released on 2012-01-03 with total page 1420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). In these proceedings are to be found original ideas and new angles on aspects of Engineering Materials, Energy Management and Control. They are the result of a forum where researchers could exchange their innovative ideas from new viewpoints. These proceedings will provide valuable guidance to scientists, physicists, chemists, teachers and others, world-wide.

Download or read book Advances in Mechanical Engineering Materials and Mechanics written by Mohamed Kharrat and published by Springer. This book was released on 2020-08-05 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research in the broad fields of mechanical engineering and mechanics. It describes innovative applications and research findings in applied and fluid mechanics, design and manufacturing, thermal science and materials. A number of industrially relevant recent advances are also highlighted. All papers were carefully selected from contributions presented at the International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM2019, held on December 16–18, 2019, in Hammamet, Tunisia, and organized by the Laboratory of Electromechanical Systems (LASEM) at the National School of Engineers of Sfax (ENIS) and the Tunisian Scientific Society (TSS), in collaboration with a number of higher education and research institutions in and outside Tunisia.

Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.

Download or read book Mechanical Engineering Materials Science and Civil Engineering II written by Ikuo Ihara and published by Trans Tech Publications Ltd. This book was released on 2013-12-13 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2nd International Conference on Mechanical Engineering, Materials Science and Civil Engineering (ICMEMSCE 2013), October 25-26, 2013, Beijing, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 231 papers are grouped as follows: Chapter 1: Material Engineering; Chapter 2: Modeling and Simulation; Chapter 3: Manufacturing and Design Science; Chapter 4: Mechanical and Dynamic Research; Chapter 5: Mechatronics and Control Systems; Chapter 6: Information and Automation; Chapter 7: Building Materials; Chapter 8: Civil Engineering

Download or read book Advances in Mechanical and Materials Technology written by Kannan Govindan and published by Springer Nature. This book was released on 2022-01-01 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select papers from the International Conference on Energy, Material Sciences and Mechanical Engineering (EMSME) - 2020. The book covers the three core areas of energy, material sciences and mechanical engineering. The topics covered include non-conventional energy resources, energy harvesting, polymers, composites, 2D materials, systems engineering, materials engineering, micro-machining, renewable energy, industrial engineering and additive manufacturing. This book will be useful to researchers and professionals working in the areas of mechanical and industrial engineering, materials applications, and energy technology.

Download or read book Advances in Mechanical Engineering Materials and Mechanics written by Mohamed Kharrat and published by Springer Nature. This book was released on 2020-08-04 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research in the broad fields of mechanical engineering and mechanics. It describes innovative applications and research findings in applied and fluid mechanics, design and manufacturing, thermal science and materials. A number of industrially relevant recent advances are also highlighted. All papers were carefully selected from contributions presented at the International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM2019, held on December 16–18, 2019, in Hammamet, Tunisia, and organized by the Laboratory of Electromechanical Systems (LASEM) at the National School of Engineers of Sfax (ENIS) and the Tunisian Scientific Society (TSS), in collaboration with a number of higher education and research institutions in and outside Tunisia.

Download or read book Mechanical Behavior of Engineering Materials written by Y.M. Haddad and published by Springer Science & Business Media. This book was released on 2000-08-31 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph consists of two volumes and provides a unified, comprehensive presentation of the important topics pertaining to the understanding and determination of the mechanical behaviour of engineering materials under different regimes of loading. The large subject area is separated into eighteen chapters and four appendices, all self-contained, which give a complete picture and allow a thorough understanding of the current status and future direction of individual topics. Volume I contains eight chapters and three appendices, and concerns itself with the basic concepts pertaining to the entire monograph, together with the response behaviour of engineering materials under static and quasi-static loading. Thus, Volume I is dedicated to the introduction, the basic concepts and principles of the mechanical response of engineering materials, together with the relevant analysis of elastic, elastic-plastic, and viscoelastic behaviour. Volume II consists of ten chapters and one appendix, and concerns itself with the mechanical behaviour of various classes of materials under dynamic loading, together with the effects of local and microstructural phenomena on the response behaviour of the material. Volume II also contains selected topics concerning intelligent material systems, and pattern recognition and classification methodology for the characterization of material response states. The monograph contains a large number of illustrations, numerical examples and solved problems. The majority of chapters also contain a large number of review problems to challenge the reader. The monograph can be used as a textbook in science and engineering, for third and fourth undergraduate levels, as well as for the graduate levels. It is also a definitive reference work for scientists and engineers involved in the production, processing and applications of engineering materials, as well as for other professionals who are involved in the engineering design process.

Download or read book Advanced Engineering Materials II written by Chun Xiang Cui and published by Trans Tech Publications Ltd. This book was released on 2012-06-14 with total page 2260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work comprises selected papers from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012) which was held on the 15th to 17th June 2012 in Zhuhai, China. The peer-reviewed papers are grouped into fourteen chapters: Composites; Micro/Nano Materials; Iron and Steel; Ceramics; Metal Alloy Materials; Biomaterials; Elastomers and Polymers; Optical/Electronic/Magnetic Materials; New Functional Materials; Building Materials; New Energy Materials; Environmental Friendly Materials; Structural Materials and Biomaterials; Chemical Materials.

Download or read book Advances in Materials Mechanics and Manufacturing II written by Mounir Ben Amar and published by Springer Nature. This book was released on 2021-09-20 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing. Chapters are based on contributions to the third International Conference on Advanced Materials Mechanics and Manufacturing, A3M2021, organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia and held online on March 25-27, 2021. They cover a variety of topics, spanning from experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. Offering a good balance of fundamental research and industrially relevant findings, they provide researchers and professionals with a timely snapshot of and extensive information on current developments in the field and a source of inspiration for future research and collaboration.