Download or read book Mechanical Engineering Technologies and Applications Volume 2 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-11-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Understanding Electro Mechanical Engineering written by Lawrence J. Kamm and published by John Wiley & Sons. This book was released on 1995-09-05 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on electromechanical systems in a variety of fields, this accessible introductory text brings you coverage of the full range of electrical mechanical devices used today. You'll gain a comprehensive understanding of the design process and get valuable insights into good design practice. UNDERSTANDING ELECTROMECHANICAL ENGINEERING will be of interest to anyone in need of a non-technical, interdisciplinary introduction to the thriving field of mechatronics.
Download or read book Mechanical Engineering Principles written by John Bird and published by Routledge. This book was released on 2012-05-04 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Mechanical Engineering Principles offers a student-friendly introduction to core engineering topics that does not assume any previous background in engineering studies, and as such can act as a core textbook for several engineering courses. Bird and Ross introduce mechanical principles and technology through examples and applications rather than theory. This approach enables students to develop a sound understanding of the engineering principles and their use in practice. Theoretical concepts are supported by over 600 problems and 400 worked answers. The new edition will match up to the latest BTEC National specifications and can also be used on mechanical engineering courses from Levels 2 to 4"--
Download or read book Newnes Mechanical Engineer s Pocket Book written by Roger Timings and published by Newnes. This book was released on 2013-10-22 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newnes Mechanical Engineer's Pocket Book is an easy to use pocket book intended to aid mechanical engineers engaged in design and manufacture and others who require a quick, day-to-day reference for useful workshop information. The book is a compilation of useful data, providing abstracts of many technical materials in various technical areas. The text is divided into five main parts: Engineering Mathematics and Science, Engineering Design Data, Engineering Materials, Computer Aided Engineering, and Cutting Tools. These main sections are further subdivided into topic areas that discuss such topics as engineering mathematics, power transmission and fasteners, mechanical properties, and polymeric materials. Mechanical engineers and those into mechanical design and shop work will find the book very useful.
Download or read book Mechanical Technology written by Dennis Henry Bacon and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised in line with the new Engineering syllabus. In particular the section on heat transfer has been expanded.
Download or read book Landmarks in Mechanical Engineering written by and published by . This book was released on 1997 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machines, devices, and systems that have touched our lives, both intimately and for the public good, are often unheralded inventions that we take for granted or never even see. Fortunately, they claim landmark recognition by the American Society of Mechanical Engineers, which now makes these engineering marvels accessible to teachers and students, travelers, researchers, and the curious. The 135 historic mechanical engineering landmarks in this book represent the accomplishments of mechanical engineers over the past 250 years - from the steam engine of Thomas Newcomen (1712), which launched the Industrial Revolution, to the Saturn V rocket (1967). This roster of landmarks tells a magnificent story of people and places and of innovation and discovery.
Download or read book Mechanical Engineering and Technology written by Tianbiao Zhang and published by Springer Science & Business Media. This book was released on 2012-02-22 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011. Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings. This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation. We hope that researchers, graduate students and other interested readers benefit scientifically from the book and also find it stimulating in the process.
Download or read book Recent Advances in Mechanical Engineering written by Harish Kumar and published by Springer Nature. This book was released on 2020-01-24 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected peer-reviewed papers from the National Conference on Advances in Mechanical Engineering (NCAME 2019), held at the National Institute of Technology Delhi, India. The book covers different areas of mechanical engineering from design engineering to manufacturing engineering. A wide range of topics are discussed such as CAD/CAM, additive manufacturing, fluid dynamics, materials science and engineering, simulation and modeling, finite element analysis, applied mechanics to name a few. The contents provide an overview of the state-of-the-art in mechanical engineering research in the country. Given the scope of the topics covered, the book will be of interest for students, researchers and professionals working in mechanical engineering.
Download or read book Springer Handbook of Mechanical Engineering written by Karl-Heinrich Grote and published by Springer Nature. This book was released on 2020-12-09 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.
Download or read book A History of Mechanical Engineering written by Ce Zhang and published by Springer Nature. This book was released on 2020-01-03 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the history of mechanical engineering since the Bronze Age. Focusing on machinery inventions and the development of mechanical technology, it also discusses the machinery industry and modern mechanical education. The evolution of machinery is divided into three stages: Ancient (before the European Renaissance), Modern (mainly including the two Industrial Revolutions) and Contemporary (since the Revolution in Physics, especially post Second World War). The book not only clarifies the development of mechanical engineering, but also reveals the driving forces behind it – e.g. the economy, national defense and human scientific research activities – to highlight the links between technology and society; mechanical engineering and the natural sciences; and mechanical engineering and related technological areas. Though mainly intended as a textbook or supplemental reading for graduate students, the book also offers a unique resource for researchers and engineers in mechanical engineering who wish to broaden their horizons.
Download or read book Benchmarking the Competitiveness of the United States in Mechanical Engineering Basic Research written by National Research Council and published by National Academies Press. This book was released on 2008-11-14 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering is critical to the design, manufacture, and operation of small and large mechanical systems throughout the U.S. economy. This book highlights the main findings of a benchmarking exercise to rate the standing of U.S. mechanical engineering basic research relative to other regions or countries. The book includes key factors that influence U.S. performance in mechanical engineering research, and near- and longer-term projections of research leadership. U.S. leadership in mechanical engineering basic research overall will continue to be strong. Contributions of U.S. mechanical engineers to journal articles will increase, but so will the contributions from other growing economies such as China and India. At the same time, the supply of U.S. mechanical engineers is in jeopardy, because of declines in the number of U.S. citizens obtaining advanced degrees and uncertain prospects for continuing to attract foreign students. U.S. funding of mechanical engineering basic research and infrastructure will remain level, with strong leadership in emerging areas.
Download or read book Materials Selection and Applications in Mechanical Engineering written by Aravamudhan Raman and published by . This book was released on 2007 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike any other text of its kind, Materials Selection and Applications in Mechanical Engineering contains complete and in-depth coverage on materials of use, their principles, processing and handling details; along with illustrative examples and sample projects. It clearly depicts the needed topics and gives adequate coverage with ample examples so that ME students can appreciate the relevance of materials to their discipline. Featuring the basic principles of materials selection for application in various engineering outcomes, the contents of this text follow those of the common first-level introductory course in materials science and engineering. Directed toward mechanical engineering, it introduces the materials commonly used in this branch, along with an exhaustive description of their properties that decide their functional characteristics and selection for use, typical problems encountered during application due to improper processing or handling of materials, non-destructive test procedures used in maintenance to detect and correct problems, and much more. What's more, numerous examples and project-type analyses to select proper materials for application are provided. With the use of this unique text, teaching a relevant second-level course in materials to ME majors has never been easier Covers all aspects of engineering materials necessary for their successful utilization in mechanical components and systems. Defines a procedure to evaluate the materials' performance efficiency in engineering applications and illustrates it with a number of examples. Includes sample project activities, along with a number of assignments for self exercise. Keeps chapters short and targeted toward specific topics for easy assimilation. Contains several unique chapters, including microprocessing, MEMS, problems encountered during use of materials in mechanical components, and NDT procedures used to detect common defects such as cracks, porosity and gas pockets, internal residual stresses, etc. Features commonly used formulae in mechanical system components in an appendix. Several tables containing material properties are included throughout the book.
Download or read book Engineering Technology Education in the United States written by National Academy of Engineering and published by National Academies Press. This book was released on 2017-01-27 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vitality of the innovation economy in the United States depends on the availability of a highly educated technical workforce. A key component of this workforce consists of engineers, engineering technicians, and engineering technologists. However, unlike the much better-known field of engineering, engineering technology (ET) is unfamiliar to most Americans and goes unmentioned in most policy discussions about the US technical workforce. Engineering Technology Education in the United States seeks to shed light on the status, role, and needs of ET education in the United States.
Download or read book A Dictionary of Mechanical Engineering written by Tony Atkins and published by OUP Oxford. This book was released on 2013-04-25 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Dictionary of Mechanical Engineering is one of the latest additions to the market leading Oxford Paperback Reference series. In over 8,500 clear and concise A to Z entries, it provides definitions and explanations for mechanical engineering terms in the core areas of design, stress analysis, dynamics and vibrations, thermodynamics, and fluid mechanics. Topics covered include heat transfer, combustion, control, lubrication, robotics, instrumentation, and measurement. Where relevant, the dictionary also touches on related subject areas such as acoustics, bioengineering, chemical engineering, civil engineering, aeronautical engineering, environmental engineering, and materials science. Useful entry-level web links are listed and regularly updated on a dedicated companion website to expand the coverage of the dictionary. Cross-referenced and including many line drawings, this excellent new volume is the most comprehensive and authoritative dictionary of its kind. It is an essential reference for students of mechanical engineering and for anyone with an interest in the subject.
Download or read book Advances in Mechanical Engineering written by Vilas R. Kalamkar and published by Springer Nature. This book was released on 2020-06-29 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer-reviewed proceedings of the International Conference on Advances in Mechanical Engineering (ICAME 2020). The contents cover latest research in several areas such as advanced energy sources, automation, mechatronics and robotics, automobiles, biomedical engineering, CAD/CAM, CFD, advanced engineering materials, mechanical design, heat and mass transfer, manufacturing and production processes, tribology and wear, surface engineering, ergonomics and human factors, artificial intelligence, and supply chain management. The book brings together advancements happening in the different domains of mechanical engineering, and hence, this will be useful for students and researchers working in mechanical engineering.
Download or read book Standard Handbook for Mechanical Engineers written by and published by . This book was released on 1923 with total page 1874 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundations of Mechanical Engineering written by A. D. Johnson and published by Routledge. This book was released on 2017-11-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: The traditional approach to teaching mechanical engineering has been to cover either mechanics or thermofluid mechanics. In response to the growing trend toward more general modules, Foundations of Mechanical Engineering provides a unified approach to teaching the basic mechanical engineering topics of mechanics, the mechanics of solids, and thermofluid mechanics.Each chapter provides a systematic approach to the subject matter and begins with a list of aims and concludes with a summary of the key equations introduced in that chapter. Copious worked examples illustrate the correct approach to problem solving, and outline solutions for all of the end-of-chapter problems let students check their own work. The authors have judiciously minimized the mathematical content and where necessary, introduce the fundamentals through diagrams and graphical representations.With complete basic coverage of both statics and dynamics, the mechanics of solids, fluid flow, and heat transfer, Foundations of Mechanical Engineering forms and ideal text for first-year mechanical engineering students.
