Download or read book Mechanical Engineering And Control Systems Proceedings Of 2015 International Conference Mecs2015 written by Xiaolong Li and published by World Scientific. This book was released on 2016-01-15 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of 113 selected papers presented at the 2015 International Conference on Mechanical Engineering and Control Systems (MECS2015), which was held in Wuhan, China during January 23-25, 2015. All accepted papers have been subjected to strict peer review by two to four expert referees, and selected based on originality, ability to test ideas and contribution to knowledge.MECS2015 focuses on eight main areas, namely, Mechanical Engineering, Automation, Computer Networks, Signal Processing, Pattern Recognition and Artificial Intelligence, Electrical Engineering, Material Engineering, and System Design. The conference provided an opportunity for researchers to exchange ideas and application experiences, and to establish business or research relations, finding global partners for future collaborations. The conference program was extremely rich, profound and featured high-impact presentations of selected papers and additional late-breaking contributions.
Download or read book Geometric Control of Mechanical Systems written by Francesco Bullo and published by Springer. This book was released on 2019-06-12 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: The area of analysis and control of mechanical systems using differential geometry is flourishing. This book collects many results over the last decade and provides a comprehensive introduction to the area.
Download or read book Mechanism Analysis written by Lyndon O. Barton and published by CRC Press. This book was released on 2016-04-19 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated and enlarged Second Edition provides in-depth, progressive studies of kinematic mechanisms and offers novel, simplified methods of solving typical problems that arise in mechanisms synthesis and analysis - concentrating on the use of algebra and trigonometry and minimizing the need for calculus.;It continues to furnish complete coverag
Download or read book Dynamics and Control of Mechanical Systems in Offshore Engineering written by Wei He and published by Springer Science & Business Media. This book was released on 2013-10-02 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics and Control of Mechanical Systems in Offshore Engineering is a comprehensive treatment of marine mechanical systems (MMS) involved in processes of great importance such as oil drilling and mineral recovery. Ranging from nonlinear dynamic modeling and stability analysis of flexible riser systems, through advanced control design for an installation system with a single rigid payload attached by thrusters, to robust adaptive control for mooring systems, it is an authoritative reference on the dynamics and control of MMS. Readers will gain not only a complete picture of MMS at the system level, but also a better understanding of the technical considerations involved and solutions to problems that commonly arise from dealing with them. The text provides: · a complete framework of dynamical analysis and control design for marine mechanical systems; · new results on the dynamical analysis of riser, mooring and installation systems together with a general modeling method for a class of MMS; · a general method and strategy for realizing the control objectives of marine systems with guaranteed stability the effectiveness of which is illustrated by extensive numerical simulation; and · approximation-based control schemes using neural networks for installation of subsea structures with attached thrusters in the presence of time-varying environmental disturbances and parametric uncertainties. Most of the results presented are analytical with repeatable design algorithms with proven closed-loop stability and performance analysis of the proposed controllers is rigorous and detailed. Dynamics and Control of Mechanical Systems in Offshore Engineering is primarily intended for researchers and engineers in the system and control community, but graduate students studying control and marine engineering will also find it a useful resource as will practitioners working on the design, running or maintenance of offshore platforms.
Download or read book Introduction to Dynamics and Control in Mechanical Engineering Systems written by Cho W. S. To and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the first books to provide in-depth and systematic application of finite element methods to the field of stochastic structural dynamics The parallel developments of the Finite Element Methods in the 1950’s and the engineering applications of stochastic processes in the 1940’s provided a combined numerical analysis tool for the studies of dynamics of structures and structural systems under random loadings. In the open literature, there are books on statistical dynamics of structures and books on structural dynamics with chapters dealing with random response analysis. However, a systematic treatment of stochastic structural dynamics applying the finite element methods seems to be lacking. Aimed at advanced and specialist levels, the author presents and illustrates analytical and direct integration methods for analyzing the statistics of the response of structures to stochastic loads. The analysis methods are based on structural models represented via the Finite Element Method. In addition to linear problems the text also addresses nonlinear problems and non-stationary random excitation with systems having large spatially stochastic property variations.
Download or read book Control Systems Engineering written by Norman S. Nise and published by Wiley. This book was released on 1995-01-15 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control Systems Theory with Engineering Applications written by Sergey E. Lyshevski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics systems (living organisms, electromechanical and industrial systems, chemical and technological processes, market and ecology, and so forth) can be considered and analyzed using information and systems theories. For example, adaptive human behavior can be studied using automatic feedback control. As an illustrative example, the driver controls a car changing the speed and steer ing wheels using incoming information, such as traffic and road conditions. This book focuses on the most important and manageable topics in applied multivariable control with application to a wide class of electromechanical dynamic systems. A large spectrum of systems, familiar to electrical, mechanical, and aerospace stu dents, engineers, and scholars, are thoroughly studied to build the bridge between theory and practice as well as to illustrate the practical application of control theory through illustrative examples. It is the author's goal to write a book that can be used to teach undergraduate and graduate classes in automatic control and nonlin ear control at electrical, mechanical, and aerospace engineering departments. The book is also addressed to engineers and scholars, and the examples considered allow one to implement the theory in a great variety of industrial systems. The main purpose of this book is to help the reader grasp the nature and significance of multivariable control.
Download or read book Identification and Control of Mechanical Systems written by Jer-Nan Juang and published by Cambridge University Press. This book was released on 2001-08-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The control of vibrating systems is a significant issue in the design of aircraft, spacecraft, bridges and high-rise buildings. This 2001 book discusses the control of vibrating systems, integrating structural dynamics, vibration analysis, modern control and system identification. Integrating these subjects is an important feature in that engineers will need only one book, rather than several texts or courses, to solve vibration control problems. The book begins with a review of basic mathematics needed to understand subsequent material. Chapters then cover more recent and valuable developments in aerospace control and identification theory, including virtual passive control, observer and state-space identification, and data-based controller synthesis. Many practical issues and applications are addressed, with examples showing how various methods are applied to real systems. Some methods show the close integration of system identification and control theory from the state-space perspective, rather than from the traditional input-output model perspective of adaptive control. This text will be useful for advanced undergraduate and beginning graduate students in aerospace, mechanical and civil engineering, as well as for practising engineers.
Download or read book Automatic Control Engineering written by Francis Harvey Raven and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1987 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, automatic control systems have been rapidly increasing in importance in all fields of engineering. The applications of control systems cover a very wide range, from the design of precision control devices such as delicate electronic equipment to the design of massive equipment such as that used for the manufacture of steel or other industrial processes. Microprocessors have added a new dimension to the capability of control systems. New applications for automatic controls are continually being discovered. This book offers coverage of control engineering beginning with discussions of how typical control systems may be represented by block diagrams. This is accomplished by first demonstrating how to represent each component or part of a system as a simple block diagram, then explaining how these individual diagrams may be connected to form the overall block diagram, just as the actual components are connected to form the complete control system. Because actual control systems frequently contain nonlinear components, considerable emphasis is given to such components. The book goes on to show that important information concerning the basic or inherent operating characteristics of a system may be obtained from knowledge of the steady-state behavior. Continuing on in the book's coverage, readers will find information involving: how the linear differential equations that describe the operation of control systems may be solved algebraically by the use of Laplace transforms; general characteristics of transient behavior; the application of the root-locus method to the design of control systems; the use of the analog computer to simulate control systems; state-space methods;digital control systems; frequency-response methods; and system compensation.
Download or read book Mechatronics written by W. Bolton and published by Pearson Higher Ed. This book was released on 2013-03-06 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics is the integration of electronic engineering, mechanical engineering, control and computer engineering. From auto-focus cameras to car engine management systems, and from state-of-the-art robots to the humble washing machine, Mechatronics has a hand in them all. This book presents a clear and comprehensive introduction to the area. It is practical and applied so it helps you to comprehend and design mechatronic systems. By also explaining the philosophy of Mechatronics it provides you with a frame of understanding to develop a truly interdisciplinary and integrated approach to engineering. Mechatronics is essential reading for students requiring an introduction to this exciting area at undergraduate and higher diploma level. New Content includes: An expanded first chapter gives a comprehensive introduction to the subject. Includes more in-depth discussion of op-amps, mechanisms, and motor selection to improve clarity and extend applications. A new Appendix on Electrical Circuit Analysis is included to make the basic methods used for both d.c. and a.c. circuit analysis easily accessible to readers.
Download or read book Non linear Control for Underactuated Mechanical Systems written by Isabelle Fantoni and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the application of modern control theory to some important underactuated mechanical systems, from the inverted pendulum to the helicopter model. It will help readers gain experience in the modelling of mechanical systems and familiarize with new control methods for non-linear systems.
Download or read book Basic Control Systems Engineering written by Paul H. Lewis and published by . This book was released on 1997 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control systems engineering. Modeling physical systems: Differential equation. Transfer - function models. State models. Simulation. Stability. Performance criteria and some effects of feedback. Root-locuc techniques...
Download or read book Control Systems Engineering written by Norman S. Nise and published by . This book was released on 2004 with total page 983 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to make the material easy to understand, this clear and thorough book emphasizes the practical application of systems engineering to the design and analysis of feedback systems. Nise applies control systems theory and concepts to current real-world problems, showing readers how to build control systems that can support today's advanced technology.
Download or read book Mechatronics written by William Bolton and published by Prentice Hall. This book was released on 1999 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The integration of electronic engineering, electrical engineering, computer technology and control engineering with mechanical engineering -- mechatronics -- now forms a crucial part in the design, manufacture and maintenance of a wide range of engineering products and processes. This book provides a clear and comprehensive introduction to the application of electronic control systems in mechanical and electrical engineering. It gives a framework of knowledge that allows engineers and technicians to develop an interdisciplinary understanding and integrated approach to engineering. This second edition has been updated and expanded to provide greater depth of coverage." -- Back cover.
Download or read book Vehicle Dynamics and Control written by Rajesh Rajamani and published by Springer Science & Business Media. This book was released on 2011-12-21 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle Dynamics and Control provides a comprehensive coverage of vehicle control systems and the dynamic models used in the development of these control systems. The control system applications covered in the book include cruise control, adaptive cruise control, ABS, automated lane keeping, automated highway systems, yaw stability control, engine control, passive, active and semi-active suspensions, tire-road friction coefficient estimation, rollover prevention, and hybrid electric vehicles. In developing the dynamic model for each application, an effort is made to both keep the model simple enough for control system design but at the same time rich enough to capture the essential features of the dynamics. A special effort has been made to explain the several different tire models commonly used in literature and to interpret them physically. In the second edition of the book, chapters on roll dynamics, rollover prevention and hybrid electric vehicles have been added, and the chapter on electronic stability control has been enhanced. The use of feedback control systems on automobiles is growing rapidly. This book is intended to serve as a useful resource to researchers who work on the development of such control systems, both in the automotive industry and at universities. The book can also serve as a textbook for a graduate level course on Vehicle Dynamics and Control.
Download or read book Automotive Control Systems written by Uwe Kiencke and published by Springer Science & Business Media. This book was released on 2005-04-13 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by two of the most respected, experienced and well-known researchers and developers in the field (e.g., Kiencke worked at Bosch where he helped develop anti-breaking system and engine control; Nielsen has lead joint research projects with Scania AB, Mecel AB, Saab Automobile AB, Volvo AB, Fiat GM Powertrain AB, and DaimlerChrysler. Reflecting the trend to optimization through integrative approaches for engine, driveline and vehicle control, this valuable book enables control engineers to understand engine and vehicle models necessary for controller design and also introduces mechanical engineers to vehicle-specific signal processing and automatic control. Emphasis on measurement, comparisons between performance and modelling, and realistic examples derive from the authors’ unique industrial experience . The second edition offers new or expanded topics such as diesel-engine modelling, diagnosis and anti-jerking control, and vehicle modelling and parameter estimation. With only a few exceptions, the approaches
Download or read book Motion Control of Underactuated Mechanical Systems written by Javier Moreno-Valenzuela and published by Springer. This book was released on 2017-07-11 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the first to present a unified perspective on the control of underactuated mechanical systems. Based on real-time implementation of parameter identification, this book provides a variety of algorithms for the Furuta pendulum and the inertia wheel pendulum, which are two-degrees-of-freedom mechanical systems. Specifically, this work addresses and solves the problem of motion control via trajectory tracking in one joint coordinate while another joint is regulated. Besides, discussions on extensions to higher degrees-of-freedom systems are given. The book, aimed at control engineers as well as graduate students, ranges from the problem of parameter identification of the studied systems to the practical implementation of sophisticated motion control algorithms. Offering real-world solutions to manage the control of underactuated systems, this book provides a concise tutorial on recent breakthroughs in the field, original procedures to achieve bounding of the error trajectories, convergence and gain tuning guidelines.
