Download or read book Mechanical Engineering And Control Systems Proceedings Of 2015 International Conference Mecs2015 written by Xiaolong Li and published by World Scientific. This book was released on 2016-01-15 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of 113 selected papers presented at the 2015 International Conference on Mechanical Engineering and Control Systems (MECS2015), which was held in Wuhan, China during January 23-25, 2015. All accepted papers have been subjected to strict peer review by two to four expert referees, and selected based on originality, ability to test ideas and contribution to knowledge.MECS2015 focuses on eight main areas, namely, Mechanical Engineering, Automation, Computer Networks, Signal Processing, Pattern Recognition and Artificial Intelligence, Electrical Engineering, Material Engineering, and System Design. The conference provided an opportunity for researchers to exchange ideas and application experiences, and to establish business or research relations, finding global partners for future collaborations. The conference program was extremely rich, profound and featured high-impact presentations of selected papers and additional late-breaking contributions.
Download or read book Mechanical Components and Control Engineering III written by Wei Min Ge and published by Trans Tech Publications Ltd. This book was released on 2014-10-08 with total page 1722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 3rd Asian Pacific Conference on Mechanical Components and Control Engineering (MCCE 2014), September 20-21, 2014, Tianjin, China
Download or read book Modern Control Engineering written by Katsuhiko Ogata and published by . This book was released on 1990 with total page 963 pages. Available in PDF, EPUB and Kindle. Book excerpt: Text for a first course in control systems, revised (1st ed. was 1970) to include new subjects such as the pole placement approach to the design of control systems, design of observers, and computer simulation of control systems. For senior engineering students. Annotation copyright Book News, Inc.
Download or read book Mechanical Vibration written by Haym Benaroya and published by CRC Press. This book was released on 2017-08-29 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration: Analysis, Uncertainties, and Control, Fourth Edition addresses the principles and application of vibration theory. Equations for modeling vibrating systems are explained, and MATLAB® is referenced as an analysis tool. The Fourth Edition adds more coverage of damping, new case studies, and development of the control aspects in vibration analysis. A MATLAB appendix has also been added to help students with computational analysis. This work includes example problems and explanatory figures, biographies of renowned contributors, and access to a website providing supplementary resources.
Download or read book ICDSMLA 2019 written by Amit Kumar and published by Springer Nature. This book was released on 2020-05-19 with total page 2010 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected high-impact articles from the 1st International Conference on Data Science, Machine Learning & Applications 2019. It highlights the latest developments in the areas of Artificial Intelligence, Machine Learning, Soft Computing, Human–Computer Interaction and various data science & machine learning applications. It brings together scientists and researchers from different universities and industries around the world to showcase a broad range of perspectives, practices and technical expertise.
Download or read book Non linear Control for Underactuated Mechanical Systems written by Isabelle Fantoni and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the application of modern control theory to some important underactuated mechanical systems, from the inverted pendulum to the helicopter model. It will help readers gain experience in the modelling of mechanical systems and familiarize with new control methods for non-linear systems.
Download or read book Innovations in Mechanical Engineering III written by Jose Machado and published by Springer Nature. This book was released on with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Tools Production Systems 3 written by Christian Brecher and published by Springer Nature. This book was released on 2021-12-13 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this third volume focuses on the design of mechatronic components, in particular the feed drives of machine tools used to generate highly dynamic drive movements. Engineering guides for the selection and design of important machine components, the control technology of feed drives, and the measuring systems required for position capture are presented. Another focus is on process and diagnostic equipment for manufacturing machines and systems. The second part describes control concepts including programming methods for various applications of modern production systems. Programmable logic controllers (PLC), numerical controllers (NC) and robot controllers (RC) are part of these presentations. In the context of automated manufacturing systems, the various levels of the automation pyramid and the importance of control systems are also outlined. Finally, the volume deals with the engineering of machines and plants. The German Machine Tools and Production Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with colored technical illustrations throughout. This first English edition is a translation of the German ninth edition.
Download or read book Automatic Control Engineering written by Francis Harvey Raven and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1987 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, automatic control systems have been rapidly increasing in importance in all fields of engineering. The applications of control systems cover a very wide range, from the design of precision control devices such as delicate electronic equipment to the design of massive equipment such as that used for the manufacture of steel or other industrial processes. Microprocessors have added a new dimension to the capability of control systems. New applications for automatic controls are continually being discovered. This book offers coverage of control engineering beginning with discussions of how typical control systems may be represented by block diagrams. This is accomplished by first demonstrating how to represent each component or part of a system as a simple block diagram, then explaining how these individual diagrams may be connected to form the overall block diagram, just as the actual components are connected to form the complete control system. Because actual control systems frequently contain nonlinear components, considerable emphasis is given to such components. The book goes on to show that important information concerning the basic or inherent operating characteristics of a system may be obtained from knowledge of the steady-state behavior. Continuing on in the book's coverage, readers will find information involving: how the linear differential equations that describe the operation of control systems may be solved algebraically by the use of Laplace transforms; general characteristics of transient behavior; the application of the root-locus method to the design of control systems; the use of the analog computer to simulate control systems; state-space methods;digital control systems; frequency-response methods; and system compensation.
Download or read book Optimal Control Theory for Applications written by David G. Hull and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The published material represents the outgrowth of teaching analytical optimization to aerospace engineering graduate students. To make the material available to the widest audience, the prerequisites are limited to calculus and differential equations. It is also a book about the mathematical aspects of optimal control theory. It was developed in an engineering environment from material learned by the author while applying it to the solution of engineering problems. One goal of the book is to help engineering graduate students learn the fundamentals which are needed to apply the methods to engineering problems. The examples are from geometry and elementary dynamical systems so that they can be understood by all engineering students. Another goal of this text is to unify optimization by using the differential of calculus to create the Taylor series expansions needed to derive the optimality conditions of optimal control theory.
Download or read book The Engineering Handbook written by Richard C. Dorf and published by CRC Press. This book was released on 2018-10-03 with total page 3080 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1995, The Engineering Handbook quickly became the definitive engineering reference. Although it remains a bestseller, the many advances realized in traditional engineering fields along with the emergence and rapid growth of fields such as biomedical engineering, computer engineering, and nanotechnology mean that the time has come to bring this standard-setting reference up to date. New in the Second Edition 19 completely new chapters addressing important topics in bioinstrumentation, control systems, nanotechnology, image and signal processing, electronics, environmental systems, structural systems 131 chapters fully revised and updated Expanded lists of engineering associations and societies The Engineering Handbook, Second Edition is designed to enlighten experts in areas outside their own specialties, to refresh the knowledge of mature practitioners, and to educate engineering novices. Whether you work in industry, government, or academia, this is simply the best, most useful engineering reference you can have in your personal, office, or institutional library.
Download or read book System Dynamics for Engineering Students written by Nicolae Lobontiu and published by Academic Press. This book was released on 2017-08-29 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering system dynamics focuses on deriving mathematical models based on simplified physical representations of actual systems, such as mechanical, electrical, fluid, or thermal, and on solving these models for analysis or design purposes. System Dynamics for Engineering Students: Concepts and Applications features a classical approach to system dynamics and is designed to be utilized as a one-semester system dynamics text for upper-level undergraduate students with emphasis on mechanical, aerospace, or electrical engineering. It is the first system dynamics textbook to include examples from compliant (flexible) mechanisms and micro/nano electromechanical systems (MEMS/NEMS). This new second edition has been updated to provide more balance between analytical and computational approaches; introduces additional in-text coverage of Controls; and includes numerous fully solved examples and exercises. - Features a more balanced treatment of mechanical, electrical, fluid, and thermal systems than other texts - Introduces examples from compliant (flexible) mechanisms and MEMS/NEMS - Includes a chapter on coupled-field systems - Incorporates MATLAB® and Simulink® computational software tools throughout the book - Supplements the text with extensive instructor support available online: instructor's solution manual, image bank, and PowerPoint lecture slides NEW FOR THE SECOND EDITION - Provides more balance between analytical and computational approaches, including integration of Lagrangian equations as another modelling technique of dynamic systems - Includes additional in-text coverage of Controls, to meet the needs of schools that cover both controls and system dynamics in the course - Features a broader range of applications, including additional applications in pneumatic and hydraulic systems, and new applications in aerospace, automotive, and bioengineering systems, making the book even more appealing to mechanical engineers - Updates include new and revised examples and end-of-chapter exercises with a wider variety of engineering applications
Download or read book Mechanical Engineering written by American Society of Mechanical Engineers and published by . This book was released on 1947 with total page 1134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Manual Mechanical Engineering written by United States. Naval Facilities Engineering Command and published by . This book was released on 1972 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Manufacturing III written by Adam Hamrol and published by Springer Nature. This book was released on 2022-05-09 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative strategies for quality control, risk assessment and sustainable development in production processes, in the era of industry 4.0. Based on peer-reviewed contributions to the 7th International Scientific-Technical Conference MANUFACTURING 2022, held on May 16–19, 2022, in Poznan, Poland, the chapters cover important topics relating to the use of quality management strategies in different stages of the production processes. They report on methods for statistical process control, vision control and inspection of machines, on the application of machine learning methods in quality control and/or risk assessment, on issues relating to digital transformation, and on methods to improve occupational safety. Besides industrial applications, the book also discusses the use quality management tools for educational purposes. By bridging between concepts in quality engineering, ergonomics, digitalization and industry 4.0, this book offers an authoritative source of information for researchers, engineers and managers.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1975 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Code of Federal Regulations written by and published by . This book was released on 1984 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special edition of the Federal Register, containing a codification of documents of general applicability and future effect ... with ancillaries.
