Download or read book Mechanical Behaviour of Nanostructured Materials written by D.G. Morris and published by Trans Tech Publications Ltd. This book was released on 1998-04-06 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation of nanocrystalline materials has been an extremely active field during the past two decades as it promises to yield new and exciting properties, which will both test the scientific understanding of the behaviour of materials in general, and offer new scope for applications. While considerable progress has been made in basic understanding, the shift from fundamental science to technological application has been slow, especially with regard to exploitation of the mechanical behaviour of these materials.
Download or read book Mechanical Properties and Deformation Behavior of Materials Having Ultra Fine Microstructures written by Michael Anthony Nastasi and published by Springer Science & Business Media. This book was released on 1993 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the emerging class of new materials characterized by ultra-fine microstrucures. The NATO ASI which produced this book was the first international scientific meeting devoted to a discussion of the mechanical properties and deformation behavior of materials having grain sizes down to a few nanometers. Topics covered include superplasticity, tribology, and the supermodulus effect. Review chapters cover a variety of other themes including synthesis, characterization, thermodynamic stability, and general physical properties. Much of the work is concerned with the issue of how far conventional techniques and concepts can be extended toward atomic scale probing. Another key issue concerns the structure of nanocrystalline materials, in particular, what is the structure and composition of the internal boundaries. These ultra-fine microstructures have proved to challenge even the finest probes that the materials science community has today.
Download or read book Bulk Nanostructured Materials written by Michael J. Zehetbauer and published by John Wiley & Sons. This book was released on 2009-06-10 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing and mechanical behaviour of bulk nanostructured materials are one of the most interesting new fields of research on advanced materials systems. Many nanocrystalline materials possess very high strength with still good ductility, and exhibit high values of fatigue resistance and fracture toughness. There has been continuing interest in these nanomaterials for use in structural and biomedical applications, and this has led to a large number of research programs worldwide. This book focuses on the processing techniques, microstructures, mechanical and physical properties, and applications of bulk nanostructured materials, as well as related fundamental issues. Only since recently can such bulk nanostructured materials be produced in large bulk dimensions, which opens the door to their commercial applications.
Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties. One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying. With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.
Download or read book Advanced Mechanical Properties and Deformation Mechanisms of Bulk Nanostructured Materials written by Yong Hao Zhao and published by Trans Tech Publications Ltd. This book was released on 2011-05-17 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only
Download or read book Mechanical Properties of Nanostructured Materials written by Abdolhossein Fereidoon and published by Xlibris Corporation. This book was released on 2016-09-26 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, with the improved abilities of computers, molecular modeling has become a powerful technique in computational chemistry with ever-increasing practical interests. At the moment, using effective algorithms along with powerful processors enables us to simulate systems, including thousands of atoms up to several microseconds. However, finding a balance between the computational costs and reliable results still remains a challenge. Two general approaches help us to reveal the behavior of these systems: quantum chemical calculations and molecular mechanics calculations. Quantum mechanics deals with physical phenomena as well as atoms behavior during chemical bonding and falls in the category of modern physics. In this book, two of the most practical quantum mechanics approaches are investigated: density functional theory (DFT) and density-functional tight-binding (DFTB).
Download or read book Mechanical Properties of Nanomaterials written by Joshua Pelleg and published by Springer Nature. This book was released on 2021-06-21 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the mechanical properties of nanomaterials produced by several techniques for various applications. The dislocations observed in specimens obtained in nanomaterials are discussed on the chapter about deformation process. Partial dislocations and grain boundary sliding deformation phenomena in nanomaterial specimens are also deeply discussed. Tests for tension, compression, and hardness are described. The behavior of nanomaterials is compared to macrosize specimens, and the results obtained for different fabrication methods are also compared. The special characteristics of nanomaterials are summarized at the end of the book.
Download or read book Molecular Dynamics Simulation of Nanostructured Materials written by Snehanshu Pal and published by CRC Press. This book was released on 2020-04-28 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular dynamics simulation is a significant technique to gain insight into the mechanical behavior of nanostructured (NS) materials and associated underlying deformation mechanisms at the atomic scale. The purpose of this book is to detect and correlate critically current achievements and properly assess the state of the art in the mechanical behavior study of NS material in the perspective of the atomic scale simulation of the deformation process. More precisely, the book aims to provide representative examples of mechanical behavior studies carried out using molecular dynamics simulations, which provide contributory research findings toward progress in the field of NS material technology.
Download or read book Nanostructured Materials written by T. Daniel Thangadurai and published by Springer Nature. This book was released on 2020-02-27 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the early stages of the development of nanostructures, including synthesis techniques, growth mechanisms, the physics and chemistry of nanostructured materials, various innovative characterization techniques, the need for functionalization and different functionalization methods as well as the various properties of nanostructured materials. It focuses on the applications of nanostructured materials, such as mechanical applications, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, as well as piezoelectric, agriculture, biomedical and, environmental remediation applications, and anti-microbial and antibacterial properties. Further, it includes a chapter on nanomaterial research developments, highlighting work on the life-cycle analysis of nanostructured materials and toxicity aspects.
Download or read book Handbook of Mechanical Nanostructuring written by Mahmood Aliofkhazraei and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing in-depth information on how to obtain high-performance materials by controlling their nanostructures, this ready reference covers both the bottom-up and the top-down approaches to the synthesis and processing of nanostructured materials. The focus is on advanced methods of mechanical nanostructuring such as severe plastic deformation, including high pressure torsion, equal channel angular processing, cyclic extrusion compression, accumulative roll bonding, and surface mechanical attrition treatment. As such, the contents are inherently application-oriented, with the methods presented able to be easily integrated into existing production processes. In addition, the structure-property relationships and ways of influencing the nanostructure in order to exhibit a desired functionality are reviewed in detail. The whole is rounded off by a look at future directions, followed by an overview of applications in various fields of structural and mechanical engineering. With its solutions for successful processing of complex-shaped workpieces and large-scale specimens with desired properties, this is an indispensable tool for purposeful materials design.
Download or read book Nano Mechanics and Materials written by Wing Kam Liu and published by John Wiley & Sons. This book was released on 2006-08-30 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is a progressive research and development topic with large amounts of venture capital and government funding being invested worldwide. Nano mechanics, in particular, is the study and characterization of the mechanical behaviour of individual atoms, systems and structures in response to various types of forces and loading conditions. This text, written by respected researchers in the field, informs researchers and practitioners about the fundamental concepts in nano mechanics and materials, focusing on their modelling via multiple scale methods and techniques. The book systematically covers the theory behind multi-particle and nanoscale systems, introduces multiple scale methods, and finally looks at contemporary applications in nano-structured and bio-inspired materials.
Download or read book Nanostructured Materials by High Pressure Severe Plastic Deformation written by Yuntian T. Zhu and published by Springer Science & Business Media. This book was released on 2006-01-20 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, it was reported that nanostructured materials processed under high pressure by HPT and ECAP have an extraordinary combination of both high strength and high ductility, which are two desirable, but rarely co-existing properties. These findings indicate that high-pressure is a critical factor that can be employed to process nanostructured materials with superior mechanical, and possibly also physical, properties. It is the objective of this workshop to review our current knowledge, identify issues for future research, and discuss future directions on the processing and properties of nanostructured materials via SPD techniques, with a special emphasis on high-pressure effects. The 42 peer-reviewed papers in this book cover areas of high pressure effect on the nanostructure and properties of SPD-processed materials, fundamentals of nanostructured materials, development of high-pressure SPD technologies for commercializations, recent advances of SPD technologies as well as applications and future markets of SPD-processed nanostructured materials.
Download or read book Bulk Nanostructured Materials with Multifunctional Properties written by I. Sabirov and published by Springer. This book was released on 2015-09-01 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a multifunctional approach to the design of bulk nanostructured metals through severe plastic deformation (SPD). Materials engineering has traditionally involved selecting a suitable material for a given application. However, modern engineering frequently requires materials with a set of multifunctional, often conflicting properties: Enhanced mechanical properties need to be combined with improved physical (electrical, magnetic, etc.) and/or chemical (corrosion resistance, biocompatibility) properties. So disparate materials properties need to be engineered and optimized simultaneously. These requirements have created a paradigm shift in which the classical materials selection approach is replaced by design of material microstructures to achieve certain performance requirements, subject to constraints on individual properties such as strength, conductivity, and corrosion resistance. Written by researchers at the forefront of this new materials design approach, the present volume provides a comprehensive introduction to multifunctional design of bulk nanostructured materials, with applications ranging from hydrogen storage to construction engineering.
Download or read book Bulk Nanostructured Materials written by Ruslan Z. Valiev and published by John Wiley & Sons. This book was released on 2013-09-17 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent results in the area of bulk nanostructured materials and new trends in their severe plastic deformation (SPD) processing, where these techniques are now emerging from the domain of laboratory-scale research into the commercial production of various bulk nanomaterials. Special emphasis is placed on an analysis of the effect of nanostructures in materials fabricated by SPD on mechanical properties (strength and ductility, fatigue strength and life, superplasticity) and functional behavior (shape memory effects, magnetic and electric properties), as well as the numerous examples of their innovative applications. There is a high innovation potential for industrial applications of bulk nanomaterials for structural use (materials with extreme strength) as well as for functional applications such as nanomagnets, materials for hydrogen storage, thermoelectric materials, superconductors, catalysts, and biomedical implants.
Download or read book Trends in Nanoscale Mechanics written by Vasyl Michael Harik and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: An outstanding feature of this book is a collection of state-of-the-art reviews written by leading researchers in the nanomechanics of carbon nanotubes, nanocrystalline materials, biomechanics and polymer nanocomposites. The structure and properties of carbon nanotubes, polycrystalline metals, and coatings are discussed in great details. The book is an exceptional resource on multi-scale modelling of metals, nanocomposites, MEMS materials and biomedical applications. An extensive bibliography concerning all these topics is included. Highlights on bio-materials, MEMS, and the latest multi-scale methods (e.g., molecular dynamics and Monte Carlo) are presented. Numerous illustrations of inter-atomic potentials, nanotube deformation and fracture, grain rotation and growth in solids, ceramic coating structures, blood flows and cell adhesion are discussed. This book provides a comprehensive review of latest developments in the analysis of mechanical phenomena in nanotechnology and bio-nanotechnology.
Download or read book Nanostructured Materials and Their Applications written by Stergios Logothetidis and published by Springer Science & Business Media. This book was released on 2012-01-13 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of nanostructures and nanomaterials applied in the fields of energy and organic electronics. It combines the knowledge from advanced deposition and processing methods of nanomaterials such as laser-based growth and nanopatterning and state-of-the-art characterization techniques with special emphasis on the optical, electrical, morphological, surface and mechanical properties. Furthermore it contains theoretical and experimental aspects for different types of nanomaterials such as nanoparticles, nanotubes and thin films for organic electronics applications. The international group of authors specifically chosen for their distinguished expertise belong to the academic and industrial world in order to provide a broader perspective. The authors take an interdisciplinary approach of physics, chemistry, engineering, materials science and nanotechnology. It appeals to researchers and graduate students.
Download or read book Micro and Nano Mechanical Testing of Materials and Devices written by Fuqian Yang and published by Springer Science & Business Media. This book was released on 2009-02-28 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale and nanostructured materials have exhibited different physical properties from the corresponding macroscopic coarse-grained materials due to the size confinement. As a result, there is a need for new techniques to probe the mechanical behavior of advanced materials on the small scales. Micro and Nano Mechanical Testing of Materials and Devices presents the latest advances in the techniques of mechanical testing on the micro- and nanoscales, which are necessary for characterizing the mechanical properties of low-dimensional materials and structures. Written by a group of internationally recognized authors, this book covers topics such as: Techniques for micro- and nano- mechanical characterization; Size effects in the indentation plasticity; Characterization of low-dimensional structure including nanobelts and nanotubes; Characterization of smart materials, including piezoelectric materials and shape memory alloys; Analysis and modeling of the deformation of carbon-nanotubes. Micro and Nano Mechanical Testing of Materials and Devices is a valuable resource for engineers and researchers working in the area of mechanical characterization of advanced materials.
