Download or read book Mechanical Behavior of Anisotropic Solids Comportment M chanique des Solides Anisotropes written by J.P. Boehler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1978, the European Mechanics Committee and the French Centre National de la Recherche Scientifique agreed to the organization of an Interna tional Colloquium on the "Mechanical Behavior of Anisotropic Solids". The meeting was held at Villard-de-Lans (near Grenoble, France) from 19th to 22 nd June 1979. The Colloquium considered mechanical aspects of the anisotropy of solids, both initial and induced by permanent deformation, anisotropic hardening and damage, oriented fissuration, etc. Topics concerned mathematical, experimental and engineering aspects of the anisotropy of metals, composites, soils and rocks. The aim of the Colloquium was to bring together experimentalists, theoretecians and engineers interested in various features of mechanical anisotropy, in order to permit an interdisciplinary exchange of understanding, experience and methods. A detailed description of the scope, aim and proposed topics is contained in the Preface. The announcement of the Colloquium attracted a large number of sub mitted contributions. Conforming with the principles of Euromech Colloquia and of the Colloques Internationaux du CNRS, the accepted contributions were limited to 50 communications. A general description of the scientific program is to be found in the Preface. Five general lectures gave state-of-the-art reports concerning some areas of the behavior of anisotropic solids; the 50 communications were divided into 12 sessions dealing with specific topics (see "Contents"). In order to facilitate subsequent contact between the reader and the contributors, full addresses are given in the "List of Authors."
Download or read book Mechanical Behavior of Anisotropic Solids Comportment Mechanique Des Solides Anisotropes written by J P Boehler and published by . This book was released on 1983-04-30 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Behavior of Anisotropic Solids Comportment M chanique des Solides Anisotropes written by J.P. Boehler and published by Springer. This book was released on 1983-04-30 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anisotropic Behaviour of Damaged Materials written by Jacek J. Skrzypek and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of this book is based on the keynote lectures delivered during the Inter national Symposium on Anisotropic Behaviour of Damaged Materials ABDM, held in Krakow-Przegorzaiy, Poland, September 9-11, 2002. The Symposium was organized by the Solid Mechanics Division of the Institute of Mechanics and Machine Design - Cracow University of Technology, under aus pices of the Dean of the Faculty of Mechanical Engineering, Cracow University of Technology, Prof. S. Michalowski. The Co-organizers of the ABDM Symposium were: • Martin-Luther-Universitat Halle-Wittenberg, • Centre of Excellence for Advanced Materials and Structures AMAS at the In stitute of Fundamental Technological Research of the Polish Academy of Sci ences, Warsaw, • Committee of Mechanics of the Polish Academy of Sciences, Warsaw. Ten chapters of this book in their present form essentially exceed lectures de livered at the Symposium. They should rather be read as not only author's recent achievements in the field, but also the state of art and synthesis done by the lead ers in the mechanics community. The mixed formula of the Symposium, namely: the invited lectures and presentations of the original papers by the participants was used. 23 original papers, published in the Symposium Proceedings on CD, exhaust the full scope of the ABDM Symposium. The present book provides a survey of various damage models focusing on the damage response in anisotropic materials as well as damage-induced anisotropy.
Download or read book Comportement M canique Des Solides Anisotropes written by J.P. Boehler and published by Springer. This book was released on 1982 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1978, the European Mechanics Committee and the French Centre National de la Recherche Scientifique agreed to the organization of an Interna tional Colloquium on the "Mechanical Behavior of Anisotropic Solids". The meeting was held at Villard-de-Lans (near Grenoble, France) from 19th to 22 nd June 1979. The Colloquium considered mechanical aspects of the anisotropy of solids, both initial and induced by permanent deformation, anisotropic hardening and damage, oriented fissuration, etc. Topics concerned mathematical, experimental and engineering aspects of the anisotropy of metals, composites, soils and rocks. The aim of the Colloquium was to bring together experimentalists, theoretecians and engineers interested in various features of mechanical anisotropy, in order to permit an interdisciplinary exchange of understanding, experience and methods. A detailed description of the scope, aim and proposed topics is contained in the Preface. The announcement of the Colloquium attracted a large number of sub mitted contributions. Conforming with the principles of Euromech Colloquia and of the Colloques Internationaux du CNRS, the accepted contributions were limited to 50 communications. A general description of the scientific program is to be found in the Preface. Five general lectures gave state-of-the-art reports concerning some areas of the behavior of anisotropic solids; the 50 communications were divided into 12 sessions dealing with specific topics (see "Contents"). In order to facilitate subsequent contact between the reader and the contributors, full addresses are given in the "List of Authors".
Download or read book Mechanics of Anisotropic Materials written by Jacek J. Skrzypek and published by Springer. This book was released on 2015-05-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is focused on constitutive description of mechanical behaviour of engineering materials: both conventional (polycrystalline homogeneous isotropic or anisotropic metallic materials) and non-conventional (heterogeneous multicomponent anisotropic composite materials). Effective material properties at the macro-level depend on both the material microstructure (originally isotropic or anisotropic) as well as dissipative phenomena occurred on fabrication and consecutive loading phase (hardening) resulting in irreversible microstructure changes (acquired anisotropy). The material symmetry is a background and anisotropy is a core around which the book is formed. In this way a revision of classical rules of enhanced constitutive description of materials is required.
Download or read book Damage Mechanics written by George Z. Voyiadjis and published by CRC Press. This book was released on 2005-06-23 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Before a structure or component can be completed, before any analytical model can be constructed, and even before the design can be formulated, you must have a fundamental understanding of damage behavior in order to produce a safe and effective design. Damage Mechanics presents the underlying principles of continuum damage mechanics along with the
Download or read book Engineering Damage Mechanics written by Jean Lemaitre and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting his major contributions to the field, Jean Lemaitre’s "Engineering Damage Mechanics" presents simplified and advanced methods organized within a unified framework for designers of any mechanical component. Explains how to apply continuous damage mechanics to failures of mechanical and civil engineering components in ductile, creep, fatigue and brittle conditions. Incorporates many basic examples, while emphasizing key practical considerations such as material parameter identification, and provides perspective on the advantage and disadvantages of various approaches.
Download or read book A Course on Damage Mechanics written by Jean Lemaitre and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new branch of science usually develops thus. Somebody publishes the basic ideas. Hesitatingly at first, then little by little, other original contributions appear, until a certain threshold is reached. Then, overview articles are printed, conferences are held, and a first mention is made in textbooks, until specialized monographs are written. Continuum darnage mechanics has reached that status now. To analyze or, if possible, to predict the failure of machine parts or other structures is one of the main goals of engineering science. Consequently fracture mechanics became one of its leading branches. It was based on the analysis of existing cracks. However, especially under conditions of cyclic loading, this might be too late to prevent a disaster. Therefore, the question regarding the precursory state, that is, the evolution of intemal darnage before macrocracks become visible, was then posed. One of the successful approaches to the problern was Weibull's theory which examined, in a statistical manner, the "weakest link" in the material volume under consideration. Unfortunately it proved too difficult mathematically to be applied to complicated parts or structures. Therefore it was highly appreciated by the scientific of material community when L. M. Kachanov published in 1958 a simple model darnage which subsequently could be extended to brittle elastic, plastic or viscous materials under all conditions of uniaxial or multiaxial, simple or cyclic loadings, so that it may be considered nearly universal.
Download or read book Statistical Models for the Fracture of Disordered Media written by H.J. Herrmann and published by Elsevier. This book was released on 2014-06-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the beginning of the century the technological desire to master the fracture of metals, concrete or polymers has boosted research and has left behind an overwhelming amount of literature. In a field where it seems difficult to say anything simple and new, the editors and authors of this book have managed to do just that.The approach to fracture taken here was not conceived by mechanical engineers or material scientists. It is essentially the by-product of exciting developments that have occurred in the last ten to fifteen years within a branch of theoretical physics, called statistical physics. Concepts such as ``percolation'' and ``fractals'', as models for the properties of fracture are not often considered by engineers. A particular aim of this volume is to emphasize the fundamental role disorder plays in the breaking process.The main scope of the volume is pedagogical and is at the same time an overview of fracture mechanics for physicists and an introduction to new concepts of statistical physics for mechanics and engineers. To this end the first half of the book consists of introductory chapters and the second half contains the results that have emerged from this new approach.
