Download or read book Mechanical and Thermal Properties of High temperature Titanium Alloys written by Clifford L. Dotson and published by . This book was released on 1967 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this program was to obtain preliminary mechanical- and thermal-property design data on some of the newer titanium alloys. Three sheet alloys (Ti-5A1-5Sn-5Zr, Ti-5A1-5Sn-5Zr-1Mo-1V, and Ti-6A1-2Sn-4Zr-2Mo) and two bar alloys (Ti-5A1-5Sn-5Zr and Ti-679) were studied. Results of the tests show that the new Ti-6A1-2Sn-4Zr-2Mo sheet alloy has well-balanced properties; with short-time strength at all temperatures comparable to or higher than those of other alpha-beta alloys and higher long-time strength (creep) than other alpha-beta alloys to which it was compared. The Ti-679 bar alloy also exhibited generally high strength over the temperature range (70 to 1000 F) at which properties were studied.

Download or read book Mechanical and Thermal Properties of High temperature Titanium Alloys written by Clifford L. Dotson and published by . This book was released on 1965 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemical composition and room-temperature tensile data are summarized for the three sheet and two bar experimental materials, all ofwhich have now been received. The status of the preparation of the specimens and of the different evaluations in the program are reviewed. Tensile data for both heats of the Ti-5Al-5Sn-5Zr-1Mo-1V alloy sheet and for single heats of the Ti-679 and Ti-5Al-5Sn-5Zr alloy bar are summarized. Data are reviewed from preliminary tests that were performed to determine the minimum temperature for stress-corrosion of the sheet alloys.

Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.

Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.

Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.

Download or read book Titanium Alloys written by Valentin N. Moiseyev and published by CRC Press. This book was released on 2005-07-13 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text offers previously elusive information on state-of-the-art Russian metallurgic technology of titanium alloys. It details their physical, mechanical, and technological properties, as well as treatments and applications in various branches of modern industry, particularly aircraft and aerospace construction. Titanium Alloys: Russian Aircraft and Aerospace Applications addresses all facets of titanium alloys in aerospace and aviation technology, including specific applications, fundamentals, composition, and properties of commercial alloys. It is useful for all students and researchers interested in the investigation and applications of titanium.

Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.

Download or read book The Relationships Between High Temperature Deformation Mechanisms Microstructures and Mechanical Properties in Titanium Alloys written by Abdus Salam and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Titanium Alloys Basics And Applications written by Peng Cao and published by World Scientific. This book was released on 2024-05-28 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: At just half the weight of steel and nickel-based superalloys, titanium and its alloys stand out primarily due to their excellent corrosion resistance, high strength, and low density. Such distinctive properties make titanium attractive for a variety of applications, including aerospace, sports and leisure, and industrial uses.The book aims to cover important aspects of titanium metallurgy, from the basic characteristics of titanium to its advanced applications.The introductory chapter introduces the metallurgical background, physical and mechanical properties of titanium, with insights into specialty titanium alloys and titanium matrix composites. The book also discusses the correlation between microstructure and properties of titanium and its alloys along with various heat-treatment opportunities that exist for tailoring the properties to achieve excellent performance in a variety of products. Additionally, the variety of applications of titanium and its alloys in aerospace and non-aerospace markets are documented in detail.Serving an updated account of recent developments with respect to titanium and its alloys, this book is an excellent, timely, and comprehensive reference for materials scientist and engineers who wish to gain knowledge about these engineering materials.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physical and Mechanical Properties of Tantalum written by H. R. Ogden and published by . This book was released on 1959 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Complex Concentrated Alloys CCAs written by Sundeep Mukherjee and published by MDPI. This book was released on 2020-11-04 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of several unique articles on the current state of research on complex concentrated alloys, as well as their compelling future opportunities in wide ranging applications. Complex concentrated alloys consist of multiple principal elements and represent a new paradigm in structural alloy design. They show a range of exceptional properties that are unachievable in conventional alloys, including high strength–ductility combination, resistance to oxidation, corrosion/wear resistance, and excellent high-temperature properties. The research articles, reviews, and perspectives are intended to provide a wholistic view of this multidisciplinary subject of interest to scientists and engineers.

Download or read book Mechanical Properties of Titanium Alloys as a Function of Heat Treatment and Section Size written by Charles F Hickey (Jr) and published by . This book was released on 1960 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Properties and High Temperature Stability of Ti Mo Al Alloys written by T. Hamajima and published by . This book was released on 1973 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: The phase diagram of the isopleth section of the TI-7 at % Mo-Al system has been improved and expanded to include alloys up to 25 at % aluminum. The mechanical and thermal stability of alloys aged in the two-phase region, beta + Ti3Al, and in the three-phase region, beta + alpha + Ti3,Al, were correlated to the microstructures. Considerable increases in high-temperature strength and ductility, as well as high-temperature stability, were achieved in a Ti-7 at % Mo-16 at % Al alloy by step-aging. (Modified author abstract).

Download or read book Properties of New High temperature Titanium Alloys written by A. W. Hodge and published by . This book was released on 1968 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Mechanical Properties of Three Titanium Alloys written by Perry R. Smoot and published by . This book was released on 1970 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical properties of three titanium-base alloys were investigated, and based on the properties obtained, these alloys should be considered for use in applications requiring tough, high strength, lightweight materials. The effect of heat treatment variables on the mechanical properties of all three alloys, and the effect of additions of O, C, N, and B on the properties of alloy C were determined. Variations in heat treatment resulted in a wide range of strength and toughness. Additions of O, C, N, and B to alloy C reduced toughness at low strength levels and, with the exception of boron, increased the maximum strength attained. (Author).