Download or read book Metallic Materials written by Philip A. Schweitzer, P.E. and published by CRC Press. This book was released on 2003-01-07 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic Materials compares and contrasts the corrosion resistance of wrought stainless steel and high nickel alloys and explores recent advances in the production of exotic metals. It emphasizes the physical and mechanical properties, corrosion resistance, workability and cost of various metals. The authors analyze the physical and mechanical properties of metals, define relevant terminology, describe the various forms of corrosion to which metals may be susceptible, examine wrought ferrous metals, alloys, and typical applications, and cover wrought nickel and high nickel alloys. This is a handy reference for the busy engineer and student in corrosion, materials, chemical, mechanical, civil, design, process, metallurgical, manufacturing, and industrial engineering.
Download or read book Steel Corrosion and Degradation of its Mechanical Properties written by Chun-Qing Li and published by CRC Press. This book was released on 2021-09-19 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art-knowledge on corrosion of steel, cast iron and ductile iron with a focus on corrosion-induced degradation of their mechanical properties. The information presented in the book is largely derived from the most current research on the effect of corrosion on degradation of mechanical properties. The book covers the basics of steel corrosion, including that of cast iron and ductile iron, that are not well covered in most literature. Models for corrosion-induced degradation of mechanical properties are presented in the book with a view to wider applications. The knowledge presented in the book can be used to prevent corrosion-induced failures of corrosion-affected structures, offering enormous benefits to the industry, business, society and community. Key strengths of the book are that it can be employed by a variety of users for different purposes in designing and assessing corrosion-affected structures, and that the knowledge and techniques presented in the book can be easily applied by users in dealing with corrosion-affected structures, and the uniqueness in examining the corrosion effect on degradation of various mechanical properties. Wtih examples of practical applications, the book is particularly useful for all stakeholders involved in steel manufacturing and construction, including engineering students, academicians, researchers, practitioners and asset managers.
Download or read book Mechanical and Corrosion Resistant Properties of Plastics and Elastomers written by Philip A. Schweitzer and published by CRC Press. This book was released on 2000-04-18 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study of the physical, mechanical and corrosion resistant properties of all the most common commercially available plastics and elastomers. It offers examples of typical applications and describes methods of joining. The physical, mechanical and corrosion resistant properties of 32 thermoplastics, 20 thermosets, and 27 elastomers are provided. There are more than 300 tables and chemical structures.
Download or read book Mechanical and Corrosion Properties written by and published by . This book was released on 1981 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1979- published in three parts: Nonferrous metals and alloys. Nonmetals. Ferrous metals and alloys.
Download or read book Mechanical Properties of Engineered Materials written by Wole Soboyejo and published by CRC Press. This book was released on 2002-11-20 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring in-depth discussions on tensile and compressive properties, shear properties, strength, hardness, environmental effects, and creep crack growth, "Mechanical Properties of Engineered Materials" considers computation of principal stresses and strains, mechanical testing, plasticity in ceramics, metals, intermetallics, and polymers, materials selection for thermal shock resistance, the analysis of failure mechanisms such as fatigue, fracture, and creep, and fatigue life prediction. It is a top-shelf reference for professionals and students in materials, chemical, mechanical, corrosion, industrial, civil, and maintenance engineering; and surface chemistry.
Download or read book Paint and Coatings written by P.E., Philip A. Schweitzer and published by CRC Press. This book was released on 2005-09-23 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Paint and Coatings: Applications and Corrosion Resistance helps designers, engineers, and maintenance personnel choose the appropriate coatings to best protect equipment, structures, and various components from corrosion, degradation, and failure. The book addresses all factors - including physical and mechanical properties, workability, co
Download or read book Surface Engineering for Corrosion and Wear Resistance written by J. R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers are faced with a bewildering array of choices when selecting a surface treatment for a specific corrosion or wear application. This book provides practical information to help them select the best possible treatment. An entire chapter is devoted to process comparisons, and dozens of useful tables and figures compare surface treatment thickness and hardness ranges; abrasion and corrosion resistance; processing time, temperature, and pressure; costs; distortion tendencies; and other critical process factors and coating characteristics. The chapter Practical Guidelines for Surface Engin.
Download or read book Magnesium and Its Alloys as Implant Materials written by Mirco Peron and published by CRC Press. This book was released on 2020-03-18 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite their tremendous potential, Mg and its alloys are not yet used in biomedical applications. This book aims to provide scientific insights into the challenges of the materials, and give an overview of the research regarding their mechanical properties, corrosion behaviour and biological performances. The authors intend to put the reader into the position to accurate discern the proper Mg-based material for his/her applications and to choose the proper improvement strategy to his/her cause. To this aim, the manuscript is structured as follow: in Section 2, the main challenges hampering the use of magnesium in biomedical applications and the common improvement strategies are listed. In Section 3, the most investigated Mg alloys are reported in separate sub-sections, detailing their mechanical properties, corrosion behaviour and biotoxicity. High-pure and ultra-high-pure Mg, Al-based Mg alloys, Zn-based Mg alloys, Ca-based alloys and RE-based Mg alloys have been considered. In Section 4, the alloys’ performances with respect to the challenges is summarized providing the reader with useful information and suggestions on the potentially most suited choice. Finally, in Section 5, an outlook portraying the authors’ opinion of the future development of the field will be provided. This book will allow biomedical engineers, surface scientists, material scientists, implant manufacturers and companies working on implant approval an overview of the state-of-the-art technologies adopted so far to overcome the drawbacks of Mg for biomedical applications. Particular emphasis is put on explaining the link between mechanical, corrosion and biocompatible properties of Mg and its alloys as well as their pros and cons. In doing so, the authors intend to put the reader into the position to accurate discern the proper Mg-based material for his/her applications and to choose the proper improvement strategy to his/her cause.
Download or read book Localized Corrosion written by Fumio Hine and published by . This book was released on 1988 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Entropy Alloys written by B.S. Murty and published by Elsevier. This book was released on 2019-03-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Entropy Alloys, Second Edition provides a complete review of the current state of the field of high entropy alloys (HEA). Building upon the first edition, this fully updated release includes new theoretical understandings of these materials, highlighting recent developments on modeling and new classes of HEAs, such as Eutectic HEAs and Dual phase HEAs. Due to their unique properties, high entropy alloys have attracted considerable attention from both academics and technologists. This book presents the fundamental knowledge, the spectrum of various alloy systems and their characteristics, key focus areas, and the future scope of the field in terms of research and technological applications. Provides an up-to-date, comprehensive understanding on the current status of HEAs in terms of theoretical understanding and modeling efforts Gives a complete idea on alloy design criteria of various classes of HEAs developed so far Discusses the microstructure property correlations in HEAs in terms of structural and functional properties Presents a comparison of HEAs with other multicomponent systems, like intermetallics and bulk metallic glasses
Download or read book Mechanical and Corrosion Properties written by F. H.. Wöhlbier and published by . This book was released on 1979 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical and Corrosion Properties written by and published by . This book was released on 1985 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Aluminum and Aluminum Alloys written by Joseph R. Davis and published by ASM International. This book was released on 1999-01-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alloying written by Joseph R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloying: Understanding the Basics is a comprehensive guide to the influence of alloy additions on mechanical properties, physical properties, corrosion and chemical behavior, and processing and manufacturing characteristics. The coverage considers "alloying" to include any addition of an element or compound that interacts with a base metal to influence properties. Thus, the book addresses the beneficial effects of major alloy additions, inoculants, dopants, grain refiners, and other elements that have been deliberately added to improve performance, as well the detrimental effects of minor elements or residual (tramp) elements included in charge materials or that result from improper melting or refining techniques. The content is presented in a concise, user-friendly format. Numerous figures and tables are provided. The coverage has been weighted to provided the most detailed information on the most industrially important materials.
Download or read book Corrosion of Weldments written by Joseph R. Davis and published by ASM International. This book was released on 2006-01-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion failures of industrial components are commonly associated with welding. The reasons are many and varied. For example, welding may reduce the resistance to corrosion and environmentally assisted cracking by altering composition and microstructure, modifying mechanical properties, introducing residual stress, and creating physical defects. This book details the many forms of weld corrosion and the methods used to minimize weld corrosion. Chapters on specific alloys groups--carbon and alloy steels, stainless steels, high-nickel alloys, and nonferrous alloys--describe both general welding characteristics and the metallurgical factors that influence corrosion behavior. Corrosion problems associated with dissimilar metal weldments are also examined. Case histories document corrosion problems unique to specific industries including oil and gas, chemical processing, pulp and paper, and electric power. Special challenges caused by high-temperature environments are discussed. Commonly used methods to monitor weld corrosion and test methods for evaluation of intergranular, pitting, crevice, stress-corrosion cracking, and other forms of corrosion are also reviewed.
Download or read book Fundamentals of Electrochemical Corrosion written by Ele Eugene Stansbury and published by ASM International. This book was released on 2000-01-01 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the essential aspects of the corrosion behavior of metals in aqueous environments, this book is designed with the flexibility needed for use in courses for upper-level undergraduate and graduate students, for concentrated courses in industry, for individual study, and as a reference book.
Download or read book Mechanical and corrosion properties written by and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
