Download or read book Measurements and Simulations of Temperature and Deformation Fields in Transient Orthogonal Metal Cutting written by Yogesh Kesrinath Potdar and published by . This book was released on 2001 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Manufacturing Technology XXXI written by J. Gao and published by IOS Press. This book was released on 2017-08-23 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The urgent need to keep pace with the accelerating globalization of manufacturing in the 21st century has produced rapid advances in manufacturing research, development and innovation. This book presents the proceedings of the 15th International Conference on Manufacturing Research (ICMR 2017), which also incorporated the 32nd National Conference on Manufacturing Research (NCMR) and was held at the University of Greenwich, London, UK, in September 2017. The conference brings together a broad community of researchers who share the common goal of developing and managing the technologies and operations key to sustaining the success of manufacturing businesses. The book is divided into 13 parts, covering topics such as advanced manufacturing technologies (including additive, ultra-precision and nano-manufacturing); manufacturing systems (digital and cyber-physical systems); product design and development (including lifecycle management and supply-chain collaboration); information and communication (including innovation and knowledge management); and manufacturing management (including lean, sustainable and cost engineering). With its comprehensive overview of current developments, this book will be of interest to all those involved in manufacturing today.
Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2001 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2005-12-02 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting applications span the entire range from mass production to mass customization to high-precision, fully customized designs. The careful balance between precision and efficiency is maintained only through intimate knowledge of the physical processes, material characteristics, and technological capabilities of the equipment and workpieces involved. The best-selling first edition of Metal Cutting Theory and Practice provided such knowledge, integrating timely research with current industry practice. This brilliant reference enters its second edition with fully updated coverage, new sections, and the inclusion of examples and problems. Supplying complete, up-to-date information on machine tools, tooling, and workholding technologies, this second edition stresses a physical understanding of machining processes including forces, temperatures, and surface finish. This provides a practical basis for troubleshooting and evaluating vendor claims. In addition to updates in all chapters, the book features three new chapters on cutting fluids, agile and high-throughput machining, and design for machining. The authors also added examples and problems for additional hands-on insight. Rounding out the treatment, an entire chapter is devoted to machining economics and optimization. Endowing you with practical knowledge and a fundamental understanding of underlying physical concepts, Metal Cutting Theory and Practice, Second Edition is a necessity for designing, evaluating, purchasing, and using machine tools.
Download or read book American Doctoral Dissertations written by and published by . This book was released on 2000 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Analysis of Heat Flow written by George Merrick Dusinberre and published by . This book was released on 1949 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Cutting Mechanics written by Viktor P. Astakhov and published by CRC Press. This book was released on 1998-12-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Cutting Mechanics outlines the fundamentals of metal cutting analysis, reducing the extent of empirical approaches to the problems as well as bridging the gap between design and manufacture. The author distinguishes his work from other works through these aspects: considering the system engineering of the cutting process id
Download or read book Metal Machining written by P.R.N. Childs and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal machining is the most widespread metal-shaping process in the mechanical manufacturing industry. World-wide investment in metal machining tools increases year on year - and the wealth of nations can be judged by it. This text - the most up-to-date in the field - provides in-depth discussion of the theory and application of metal machining at an advanced level. It begins with an overview of the development of metal machining and its role in the current industrial environment and continues with a discussion of the theory and practice of machining. The underlying mechanics are analysed in detail and there are extensive chapters examining applications through a discussion of simulation and process control. "Metal Machining: Theory and Applications" is essential reading for senior undergraduates and postgraduates specialising in cutting technology. It is also an invaluable reference tool for professional engineers. Professors Childs, Maekawa, Obikawa and Yamane are four of the leading authorities on metal machining and have worked together for many years.Of interest to all mechanical, manufacturing and materials engineersTheoretical and practical problems addressed
Download or read book Modeling of Metal Forming and Machining Processes written by Prakash Mahadeo Dixit and published by Springer Science & Business Media. This book was released on 2008-05-14 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by authorities in the subject, this book provides a complete treatment of metal forming and machining by using the computational techniques FEM, fuzzy set theory and neural networks as modelling tools. The algorithms and solved examples included make this book of value to postgraduates, senior undergraduates, and lecturers and researchers in these fields. Research and development engineers and consultants for the manufacturing industry will also find it of use.
Download or read book Fundamentals of Metal Machining and Machine Tools written by Winston A. Knight and published by CRC Press. This book was released on 2019-08-08 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting changes in machining practice, Fundamentals of Machining and Machine Tools, Third Edition emphasizes the economics of machining processes and design for machining. This edition includes new material on super-hard cutting tool materials, tool geometries, and surface coatings. It describes recent developments in high-speed machining, hard machining, and cutting fluid applications such as dry and minimum-quantity lubrication machining. It also presents analytical methods that outline the limitations of various approaches. This edition features expanded information on tool geometries for chip breaking and control as well as improvements in cost modeling of machining processes.
Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. - Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry - Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels - Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Machining and Machine Tools written by Steven Liang and published by Springer. This book was released on 2015-12-29 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamental, analytical, and quantitative knowledge of machining process planning and optimization based on advanced and practical understanding of machinery, mechanics, accuracy, dynamics, monitoring techniques, and control strategies that they need to understanding machining and machine tools. It is written for first-year graduate students in mechanical engineering, and is also appropriate for use as a reference book by practicing engineers. It covers topics such as single and multiple point cutting processes; grinding processes; machine tool components, accuracy, and metrology; shear stress in cutting, cutting temperature and thermal analysis, and machine tool chatter. The second section of the book is devoted to “Non-Traditional Machining,” where readers can find chapters on electrical discharge machining, electrochemical machining, laser and electron beam machining, and biomedical machining. Examples of realistic problems that engineers are likely to face in the field are included, along with solutions and explanations that foster a didactic learning experience.
Download or read book The Mechanics of Machining written by Peter Louis Brennan Oxley and published by Ellis Horwood. This book was released on 1989 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement in Machining and Tribology written by J. Paulo Davim and published by Springer. This book was released on 2018-12-29 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the research advances in the science of measurement, giving special focus to the field of machining and tribology. Topics such as dimensional metrology, precision measurements, industrial metrology, accuracy and precision in measurement are covered. Also theoretical aspects such as modelling and simulation are highlighted.
Download or read book Bulletin of the Japan Society of Precision Engineering written by Seiki Gakkai (Japan) and published by . This book was released on 1976 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt:
