Download or read book Measurement Technology and Intelligent Instruments VIII written by Wei Gao and published by Trans Tech Publications Ltd. This book was released on 2008-06-12 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). Measurement, rigorously defined as ascertaining the size, amount or degree of a measurand by instrumental comparison with a standard unit or by indirect calculation based upon theory, is what makes science and technology different to imagination. Measurement is essential in industry, commerce and daily life. In the manufacturing industry in particular, measurement and instrumentation technology play increasingly important roles not only in the traditional field of manufacturing but also in the new fields of micro/nano technology and bioengineering. This book presents recent advances in the use of measurement and instrumentation in the manufacturing industry. A wide range of topics are covered including: micro/nano-metrology,precision measurements,online and in-process measurements,surface metrology,optical metrology and image processing,bio-measurement, sensor technology,intelligent measurement and instrumentation,uncertainty, traceability and calibration and signal-processing algorithms.
Download or read book Measurement Technology and Intelligent Instruments IX written by Yuri V. Chugui and published by Trans Tech Publications Ltd. This book was released on 2010-05-20 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection focuses on measurement science and metrology: micro- and nano- measurements; novel measurement methods and diagnostic technologies, including non-destructive and dimensional inspection, optical and X-ray tomography and interferometry, terahertz technologies for science, industry and biomedicine, intelligent measuring instruments and systems for industry and transport, measurements of geometrical and mechanical quantities, measurements and metrology for humanitarian fields and education in measurement science.
Download or read book Measurement Technology and Intelligent Instruments VI written by Yongsheng Gao and published by Trans Tech Publications Ltd. This book was released on 2005-10-15 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: The requirements of high precision and of high-quality components and devices in meeting the needs of modern industry and society in disciplines such as semiconductors, optics, nanotechnology, MEMS, manufacturing, biomedical and environmental engineering, make measurement technology and intelligent instruments (which sense, measure and report), more important than ever, and essential for the rapid development of information technology. Following the lead of the previous five publications (1989, 1993, 1996, 1998, 2001) in the series, Measurement Technology and Intelligent Instruments, this book presents the most recent advances in this important field. In all, 123 papers were contributed from many regions of the world; including China, Taiwan (China), Japan, Russia, Hong Kong (China), Germany, Australia, Austria, Canada, Korea, Poland, Slovakia and the UK and US.
Download or read book Measurement Technology and Intelligent Instruments XII written by Liang Chia Chen and published by Trans Tech Publications Ltd. This book was released on 2017-09-15 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection focuses on measurement science and metrology: micro- and nano-measurements; novel measurement methods and diagnostic technologies, including non-destructive and dimensional inspection, optical and X-ray tomography and interferometry, terahertz technologies for science, industry and biomedicine, intelligent measuring instruments and systems for industry and transport, measurements of geometrical and mechanical quantities, measurements and metrology for humanitarian fields and education in measurement science. The aim was to present the current state and evolution of measuring technology and intelligent instruments, to highlight novel technologies for science, industry and engineering, and to spot promising ways towards further development, of new technologies for measurement, at the international level. The special collection was established following the results of the 12th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2015, September 22 - 25, 2015, Taipei, Taiwan).
Download or read book Measurement and Instrumentation written by Alan S Morris and published by Academic Press. This book was released on 2015-08-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurement and Instrumentation: Theory and Application, Second Edition, introduces undergraduate engineering students to measurement principles and the range of sensors and instruments used for measuring physical variables. This updated edition provides new coverage of the latest developments in measurement technologies, including smart sensors, intelligent instruments, microsensors, digital recorders, displays, and interfaces, also featuring chapters on data acquisition and signal processing with LabVIEW from Dr. Reza Langari. Written clearly and comprehensively, this text provides students and recently graduated engineers with the knowledge and tools to design and build measurement systems for virtually any engineering application. Provides early coverage of measurement system design to facilitate a better framework for understanding the importance of studying measurement and instrumentation Covers the latest developments in measurement technologies, including smart sensors, intelligent instruments, microsensors, digital recorders, displays, and interfaces Includes significant material on data acquisition and signal processing with LabVIEW Extensive coverage of measurement uncertainty aids students’ ability to determine the accuracy of instruments and measurement systems
Download or read book Proceedings of the Sixth International Symposium on Measurement Technology and Intelligent Instruments written by Hong Kong University of Science and Technology. Department of Mechanical Engineering and published by . This book was released on 2003 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement Technology and Intelligent Instruments XII written by Liang-Chia Chen and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection focuses on measurement science and metrology: micro- and nano-measurements; novel measurement methods and diagnostic technologies, including non-destructive and dimensional inspection, optical and X-ray tomography and interferometry, terahertz technologies for science, industry and biomedicine, intelligent measuring instruments and systems for industry and transport, measurements of geometrical and mechanical quantities, measurements and metrology for humanitarian fields and education in measurement science. The aim was to present the current state and evolution of measuring technology and intelligent instruments, to highlight novel technologies for science, industry and engineering, and to spot promising ways towards further development, of new technologies for measurement, at the international level. The special collection was established following the results of the 12th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2015, September 22 - 25, 2015, Taipei, Taiwan).
Download or read book Advanced Mathematical and Computational Tools in Metrology and Testing written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Mathematical Computational Tools in Metrology Testing VIII written by Franco Pavese and published by World Scientific. This book was released on 2009 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields. This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.
Download or read book Measurement Technology and Intelligent Instruments XI written by Robert Schmitt and published by . This book was released on 2014-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 11th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2013), July 1-3, 2013, Aachen, Germany
Download or read book Second International Symposium on Measurement Technology and Intelligent Instruments written by Zhu Li and published by . This book was released on 1993 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sensors and Their Applications VIII Proceedings of the eighth conference on Sensors and their Applications held in Glasgow UK 7 10 September 1997 written by A. T. Augousti and published by CRC Press. This book was released on 1997-01-01 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors and Their Applications VIII provides a valuable forum for individuals from all over the world working in all areas of sensors to meet and discuss the developments and applications of transducers and sensor systems. The strength of the sensor community in the UK reinforces the importance of this volume as a valuable reference for all workers in the field.
Download or read book Measurement Technology and Intelligent Instruments VI written by Yongsheng Gao and published by Trans Tech Publications. This book was released on 2005 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: The requirements of high precision and of high-quality components and devices in meeting the needs of modern industry and society in disciplines such as semiconductors, optics, nanotechnology, MEMS, manufacturing, biomedical and environmental engineering, make measurement technology and intelligent instruments (which sense, measure and report), more important than ever, and essential for the rapid development of information technology.
Download or read book Modern Intelligent Instruments Theory and Application written by Changjian Deng and published by Bentham Science Publishers. This book was released on 2020-07-02 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: His text book serves as a guide for readers learning about the technical design of intelligent instruments, that is, instruments designed to collect information about the performance of other electronic devices and systems. The book introduces the readers to the concept of intelligent instrumentation and guides them on more advanced aspects of the subject including signal detection and analysis, data processing, performance analysis and data communication. Practical examples are also provided in the latter half of the book to blend the theoretical concepts with applied knowledge for the benefit of the reader. Key features: - Features 10 chapters covering key topics related to intelligent instrument design and operation - Provides theoretical knowledge of fundamental concepts - Provides practical examples of working instrument models (online equipment monitoring system and a mobile robot) - Provides notes on the use of packages such as MATLAB, ARGUINO and Proteus to develop intelligent instruments - Presents information in a simple, easy-to-understand format which is reader friendly - Presents handy chapter notes and references for the reader Modern Intelligent Instruments - Theory and Application is a useful textbook for engineering students and technical apprentices learning about instrumentation and PCB design and testing.
Download or read book Computer and Computing Technologies in Agriculture IV written by Daoliang Li and published by Springer Science & Business Media. This book was released on 2011-02-11 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes Part IV of the refereed four-volume post-conference proceedings of the 4th IFIP TC 12 International Conference on Computer and Computing Technologies in Agriculture, CCTA 2010, held in Nanchang, China, in October 2010. The 352 revised papers presented were carefully selected from numerous submissions. They cover a wide range of interesting theories and applications of information technology in agriculture, including simulation models and decision-support systems for agricultural production, agricultural product quality testing, traceability and e-commerce technology, the application of information and communication technology in agriculture, and universal information service technology and service systems development in rural areas.
Download or read book Nuclear Power written by Pavel Tsvetkov and published by BoD – Books on Demand. This book was released on 2011-09-26 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in reactor designs, materials and human-machine interfaces guarantee safety and reliability of emerging reactor technologies, eliminating possibilities for high-consequence human errors as those which have occurred in the past. New instrumentation and control technologies based in digital systems, novel sensors and measurement approaches facilitate safety, reliability and economic competitiveness of nuclear power options. Autonomous operation scenarios are becoming increasingly popular to consider for small modular systems. This book belongs to a series of books on nuclear power published by InTech. It consists of four major sections and contains twenty-one chapters on topics from key subject areas pertinent to instrumentation and control, operation reliability, system aging and human-machine interfaces. The book targets a broad potential readership group - students, researchers and specialists in the field - who are interested in learning about nuclear power.
Download or read book Smart Sensors and MEMS written by S Nihtianov and published by Woodhead Publishing. This book was released on 2018-03-09 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Sensors and MEMS: Intelligent Devices and Microsystems for Industrial Applications, Second Edition highlights new, important developments in the field, including the latest on magnetic sensors, temperature sensors and microreaction chambers. The book outlines the industrial applications for smart sensors, covering direct interface circuits for sensors, capacitive sensors for displacement measurement in the sub-nanometer range, integrated inductive displacement sensors for harsh industrial environments, advanced silicon radiation detectors in the vacuum ultraviolet (VUV) and extreme ultraviolet (EUV) spectral range, among other topics. New sections include discussions on magnetic and temperature sensors and the industrial applications of smart micro-electro-mechanical systems (MEMS). The book is an invaluable reference for academics, materials scientists and electrical engineers working in the microelectronics, sensors and micromechanics industry. In addition, engineers looking for industrial sensing, monitoring and automation solutions will find this a comprehensive source of information. Contains new chapters that address key applications, such as magnetic sensors, microreaction chambers and temperature sensors Provides an in-depth information on a wide array of industrial applications for smart sensors and smart MEMS Presents the only book to discuss both smart sensors and MEMS for industrial applications
