Download or read book Measurement of the Top Quark Pair Production Cross Section with the ATLAS Detector at LHC in Pp Collisions at s written by Tatevik Abajyan and published by . This book was released on 2012 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Top Quark Pair Production written by Anna Christine Henrichs and published by Springer Science & Business Media. This book was released on 2013-10-04 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Before any kind of new physics discovery could be made at the LHC, a precise understanding and measurement of the Standard Model of particle physics' processes was necessary. The book provides an introduction to top quark production in the context of the Standard Model and presents two such precise measurements of the production of top quark pairs in proton-proton collisions at a center-of-mass energy of 7 TeV that were observed with the ATLAS Experiment at the LHC. The presented measurements focus on events with one charged lepton, missing transverse energy and jets. Using novel and advanced analysis techniques as well as a good understanding of the detector, they constitute the most precise measurements of the quantity at that time.
Download or read book Top Quark Pair Production Cross Sections and Calibration of the Top Quark Monte Carlo Mass written by Jan Kieseler and published by Springer. This book was released on 2016-06-15 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents the first experimental calibration of the top-quark Monte-Carlo mass. It also provides the top-quark mass-independent and most precise top-quark pair production cross-section measurement to date. The most precise measurements of the top-quark mass obtain the top-quark mass parameter (Monte-Carlo mass) used in simulations, which are partially based on heuristic models. Its interpretation in terms of mass parameters used in theoretical calculations, e.g. a running or a pole mass, has been a long-standing open problem with far-reaching implications beyond particle physics, even affecting conclusions on the stability of the vacuum state of our universe. In this thesis, this problem is solved experimentally in three steps using data obtained with the compact muon solenoid (CMS) detector. The most precise top-quark pair production cross-section measurements to date are performed. The Monte-Carlo mass is determined and a new method for extracting the top-quark mass from theoretical calculations is presented. Lastly, the top-quark production cross-sections are obtained – for the first time – without residual dependence on the top-quark mass, are interpreted using theoretical calculations to determine the top-quark running- and pole mass with unprecedented precision, and are fully consistently compared with the simultaneously obtained top-quark Monte-Carlo mass.
Download or read book Measurement of the Top Quark Pair Production Cross Section and an In situ B tagging Efficiency Calibration with ATLAS in Pp Collisions at s written by Bin Guo and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We present a measurement of the top anti-top quark (ttbar)production cross section in the dilepton final states from proton-proton collisions at a center of mass energy at 7 TeV at the LHC. A b-tagging algorithm based on tracks displaced from the event interaction vertex is applied to identify bottom quark jets from top quark decay and reject background events. Given the relatively pure sample of bottom quark jets in ttbar dilepton final states, a new technique to measure in-situ the b-tagging efficiency is introduced that uses the distribution of the number of observed b-tagged jets. We present results with data collected at the ATLAS detector in 2010 with an integrated luminosity of 35 pb-1. The measured ttbar cross section is 176 +22/-21 (stat.) ± 20 (syst.) ± 6 (lum.) pb in the dilepton channel. We will also discuss the future prospects of this measurement.
Download or read book Measurement of the Top Quark Pair Production Cross Section in Pp Collisions at Sqrt s written by and published by . This book was released on 2012 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: The top quark pair production cross section is measured in dilepton events with one electron or muon, and one hadronically decaying tau lepton from the decay t anti-t to (l nu(l)) (tau nu(tau)) b anti-b, where l can be either an electron or a muon. The data sample corresponds to an integrated luminosity of 2.0 inverse femtobarns for the electron channel and 2.2 inverse femtobarns for the muon channel, collected by the CMS detector at the LHC. This is the first measurement of the t anti-t cross section explicitly including tau leptons in proton-proton collisions at sqrt(s)=7 TeV. The measured value sigma(t anti-t) = 143 +/- 14 (stat.) +/- 22 (syst.) +/- 3 (lumi.) pb is consistent with the standard model predictions.
Download or read book Spin Correlations in tt Events from pp Collisions written by Boris Lemmer and published by Springer. This book was released on 2015-06-24 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis introduces readers to the Standard Model, the top quark and its properties, before explaining the concept of spin correlation measurement. The first measurement of top quark spin correlations at the LHC in the lepton+jets decay channel is presented. As the heaviest elementary particle, the top quark plays an essential role in the Standard Model of elementary particle physics. In the case of top quarks being produced in pairs at hadron colliders, the Standard Model predicts their spins to be correlated. The degree of correlation depends on both the production mechanism and properties of the top quark. Any deviation from the Standard Model prediction can be an indicator for new physics phenomena. The thesis employs an advanced top quark reconstruction algorithm including dedicated identification of the up- and down-type quarks from the W boson decay.
Download or read book First Measurement of the Running of the Top Quark Mass written by Matteo M. Defranchis and published by Springer Nature. This book was released on 2022-01-03 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, the first measurement of the running of the top quark mass is presented. This is a fundamental quantum effect that had never been studied before. Any deviation from the expected behaviour can be interpreted as a hint of the presence of physics beyond the Standard Model. All relevant aspects of the analysis are extensively described and documented. This thesis also describes a simultaneous measurement of the inclusive top quark-antiquark production cross section and the top quark mass in the simulation. The measured cross section is also used to precisely determine the values of the top quark mass and the strong coupling constant by comparing to state-of-the-art theoretical predictions. All the theoretical and experimental aspects relevant to the results presented in this thesis are discussed in the initial chapters in a concise but complete way, which makes the material accessible to a wider audience.
Download or read book Measurement of the Top Quark Pair Production Cross Section With ATLAS in Pp Collisions at sqrt s written by and published by . This book was released on 2013 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Observation of Top quark Pair Production in Association with a Photon and Measurement of the Tt u00AF Production Cross Section in pp Collisions at u221A s written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A search is performed for top-quark pairs (tt¯) produced together with a photon (?) with transverse energy greater than 20 GeV using a sample of tt¯ candidate events in final states with jets, missing transverse momentum, and one isolated electron or muon. The data set used corresponds to an integrated luminosity of 4.59 fb−1 of proton-proton collisions at a center-of-mass energy of 7 TeV recorded by the ATLAS detector at the CERN Large Hadron Collider. In total, 140 and 222 tt¯? candidate events are observed in the electron and muon channels, to be compared to the expectation of 79 ± 26 and 120 ± 39 non-tt¯? background events, respectively. The production of tt¯? events is observed with a significance of 5.3 standard deviations away from the null hypothesis. The tt¯? production cross section times the branching ratio (BR) of the single-lepton decay channel is measured in a fiducial kinematic region within the ATLAS acceptance. The measured value is ?fidtt¯? × BR = 63 ± 8(stat)+17–13(syst) ± 1(lumi) fb per lepton flavor, in good agreement with the leading-order theoretical calculation normalized to the next-to-leading-order theoretical prediction of 48 ± 10 fb.
Download or read book First Measurement of the Cross Section for Top Quark Pair Production in Proton Proton Collisions at sqrt s written by and published by . This book was released on 2011 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first measurement of the cross section for top-quark pair production in pp collisions at the LHC at center-of-mass energy sqrt(s)= 7 TeV has been performed using 3.1 {\pm} 0.3 inverse pb of data recorded by the CMS detector. This result utilizes the final state with two isolated, highly energetic charged leptons, large missing transverse energy, and two or more jets. Backgrounds from Drell-Yan and non-W/Z boson production are estimated from data. Eleven events are observed in the data with 2.1 {\pm} 1.0 events expected from background. The measured cross section is 194 {\pm} 72 (stat.) {\pm} 24 (syst.) {\pm} 21 (lumi.) pb, consistent with next-to-leading order predictions.
Download or read book Measurement of the Top Quark Pair Production Cross Section and an In situ B tagging Efficiency Calibration with ATLAS in Proton proton Collisions at Center of Mass Energy written by Bin Guo and published by . This book was released on 2011 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: We present a measurement of the top anti-top quark (tt ̄ ) production cross section in the dilepton final states from proton-proton collisions at a center of mass energy at 7 TeV at the LHC. A b-tagging algorithm based on tracks displaced from the event interaction vertex is applied to identify bottom quark jets from top quark decay and reject background events. Given the relatively pure sample of bottom quark jets in tt ̄ dilepton final states, a new technique to measure in-situ the b-tagging efficiency is introduced that uses the distribution of the number of observed b-tagged jets. We present results with data collected at the ATLAS detector in 2010 with an integrated luminosity of 35 pb -1. The measured tt ̄ cross section is 176+22-21stat. +20-20 (syst.) +/- 6 (lum.) pb in the dilepton channel. We will also discuss the future prospects of this measurement.
Download or read book Measurement of the Integrated and Differential T tbar Production Cross Sections for High pt Top Quarks in Pp Collisions at sqrt s written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The cross section for pair production of top quarks (t-tbar) with high transverse momenta is measured in pp collisions, collected with the CMS detector at the LHC with sqrt(s) = 8 TeV in data corresponding to an integrated luminosity of 19.7 inverse-femtobarns. The measurement is performed using lepton+jets events, where one top quark decays semileptonically, while the second top quark decays to a hadronic final state. The hadronic decay is reconstructed as a single, large-radius jet, and identified as a top quark candidate using jet substructure techniques. The integrated cross section and the differential cross sections as a function of top quark pt and rapidity are measured at particle level within a fiducial region related to the detector-level requirements and at parton level. The particle-level integrated cross section is found to be sigma[t-tbar] = 0.499 +/- 0.035 (stat+syst) +/- 0.095 (theory) +/- 0.013 (lumi) pb for top quark pt> 400 GeV. The parton-level measurement is sigma[t-tbar] = 1.44 +/- 0.10 (stat+syst) +/- 0.29 (theory) +/- 0.04 (lumi) pb. The integrated and differential cross section results are compared to predictions from several event generators.
Download or read book Measurement of the Top Quark Pair Production Cross Section in Pp Collisions at a Center of mass Energy of 7 TeV with the CMS Experiment at the LHC written by Geng-Yuan Jeng and published by . This book was released on 2011 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: We perform a measurement of the top quark pair production cross section in pp collisions at a center-of-mass energy of 7 TeV at the Large Hadron Collider. The analysis is based on a 36 pb -1 dataset collected with the CMS experiment in 2010. We study the kinematic characteristics of events with exactly one isolated muon in association with additional hard jets and exhibiting substantial missing transverse energy to distinguish the tt− signal from the electroweak and QCD multijet backgrounds. The tt− signal is extracted by simultaneously fitting the tri-jet invariant mass distributions in events with exactly three jets and at least four jets. The measured cross section is 157 ± 12(stat.[Special characters omitted.] (syst.) ± 6(lumi.) pb, which is consistent with the theoretical predictions.
Download or read book Cross section Measurements of Top quark Pair Production in Association with a Hard Photon at 13 TeV with the ATLAS Detector written by Knut Zoch and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: 25 years after the top quark's discovery, the Large Hadron Collider at CERN produces proton-proton collision data on unprecedented scales at unprecedented energies - and has heralded an era of top-quark precision measurements. The production of a top-quark pair in association with a photon ($t bar{t} gamma$) gives access to the electromagnetic top-photon coupling, one of the fundamental properties of the top quark. Various extensions of the Standard Model predict modifications of the coupling strength or structure, and deviations from the Standard Model prediction of the $t bar{t} gamma$ pr...
Download or read book Measurements of the Top Quark Pair Production Cross Section and Branching Ratio to a W boson and Bottom Quark Using the Semi leptonic and Dilepton Final States with the ATLAS Detector at the LHC written by Robert E. Calkins and published by . This book was released on 2012 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : In the Standard Model, the top quark plays a unique role as the heaviest known fundamental particle and as a quark that decays before it is able to hadronize. Top quarks are expected to decay to a W-boson and a b-quark nearly 100% of the time. If the branching ratio of t → Wb is lower than one, the distribution of the number of b-tagged jets will shift to lower multiplicities. A simultaneous likelihood fit to the number of b-tagged jets distributions in the lepton+jets and dilepton channels is performed on 4.7 fb−1 of data collected by the ATLAS detector to extract both the branching ratio and the tt ̄ cross section. The branching ratio of t → Wb, R, is measured to be 1.06±0.11, which is consistent with the Standard Model value. This is the first measurement of the t → Wb branching ratio performed with the ATLAS detector using both the lepton+jets and dilepton channels at the LHC. The tt ̄ cross section is measured to be [special characters omitted] pb, which agrees with NNLO predictions.
Download or read book Measurement of the Top Quark Pair Production Cross Section in P Anti p Collisions at u221A s written by and published by . This book was released on 2006 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this thesis is the measurement of the rate at which a top-antitop quark pair is produced in pp collisions at a center of mass energy of ps = 1:96 TeV. The data are collected with the D detector, a multi-purpose detector operating at the Fermilab Tevatron collider during Run II. A measurement of the top quark pair (t$\bar{t}$) production cross section ( ?t$\bar{t}$) in p$\bar{p}$ collisions at a center of mass energy of 1.96 TeV is presented. The measurement is based on data recorded by the D0 Detector at the Fermilab Tevatron Collider, and preselected in the e+jets (366 pb-1) and ?+jets (363 pb-1) channels. The cross section is extracted by applying a lifetime-tagging technique to the data, and yields ?t$\bar{t}$ = 6.96$+1.07\atop{-0.98}$(stat + syst) ± 0.45(lumi) pb; for a top quark mass mt =175 GeV, in good agreement with the Standard Model prediction.
Download or read book Measurement of the TtH Production Cross section with a Collimated H Bb Decay in Pp Collisions at Sqrt s written by Eftychia Tzovara and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The predictions of the Standard Model (SM) of particle physics have been probed with remarkable accuracy, so far. The Large Hadron Collider (LHC) at CERN has significantly contributed to this quest. A remarkable achievement of the ATLAS and CMS experiments at the LHC was the discovery of the Higgs boson in 2012, the last missing piece of the SM. With the increasing amount of proton-proton collisions delivered by the LHC, more precise measurements of the Higgs boson are now possible, while rare processes are accessible as well. A property of the Higgs boson that is of particular importance is its coupling to the top quark, which is expected to be the strongest in the SM due to the high mass of the top quark. Therefore, its precise measurement is a stringent test of the SM. A direct measurement of the top-quark Yukawa coupling can be assessed through the Higgs-boson production in association with a pair of top quarks (ttH). This thesis presents the measurement of the ttH process with a subsequent Higgs-boson decay to a pair of b-quarks (H -> bb), the decay mode with the largest branching ratio. The measurement is performed with data collected by the ATLAS detector, corresponding to an integrated luminosity of 139 fb^-1 at a center-of-mass energy of 13 TeV. Events with one or two charged leptons from the tt decay in the final state are considered to the measurement. The main challenge of the ttH(H -> bb) channel emerges from the large SM backgrounds from the production of top-quark pairs with additional jets (tt+jets). Also the many jets coming from b-hadrons (b-jets) in the final state cause combinatorial ambiguities. Thus, the identification of such jets is decisive in order to determine the signal and reject many background processes. The ttH events are split into exclusive analysis regions, based on the number of leptons, jets, and jets tagged as b-jets, providing regions enhanced in signal, or in the main background components. Specifically in the single-lepton channel, a boosted category is defined by selecting events in which the Higgs boson and possibly also the hadronically decaying top quark are produced with high transverse momentum (pT), with their decay products being collimated in large-radius jets. The single-lepton boosted channel targets events with Higgs-boson candidate pT >= 300 GeV and is the main scope of this thesis. To identify the reconstructed objects with the underlying particles and to maximise the discrimination of the ttH signal from the overwhelming tt+jets background events in the signal-enriched regions, machine-learning algorithms are employed. The background is dominated by a tt process with an additional gluon in the final state which further splits into a pair of b-quarks (tt+bb). Besides, a large number of heavy-flavour jets in the final state is not well modelled, thus many systematic uncertainties have to be considered, decreasing the sensitivity of the measurement. All the defined analysis regions are analysed together in a combined profile likelihood fit to test for the presence of signal. The fit simultaneously determines the event yields for the signal and the most important background component, while constraining the overall background model within the assigned systematic uncertainties. Eventually, the ratio of the measured ttH cross section to the SM expectation in the inclusive cross-section measurement is found to be 0.35 +0.36,-0.34}, corresponding to an observed (expected) significance of 1.0 (2.7) standard deviations. A ttH signal strength larger than the SM prediction is excluded at 95% confidence level. The measurement uncertainty is dominated by systematic uncertainties, mainly regarding the theoretical knowledge of the tt +>= 1b background process. Finally, to further test the SM, the cross-section is measured differentially as a function of the generator-level Higgs-boson pT, taking advantage of the reconstruction of the Higgs-boson kinematics.
