Download or read book Measurement of the Fundamental Parameters for the Film Rupture written by and published by . This book was released on 1999 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Identification of the mechanism responsible for primary water stress corrosion cracking (PWSCC) in nickel-base alloys is a controversial topic. Numerous mechanisms, including the film-rupture/oxidation (i.e., slip-oxidation or slip-dissolution) mechanism, have been proposed to explain PWSCC. According to this mechanism, the observed sensitivity of PWSCC to material and environmental factors may be explained by the combined effects of repassivation kinetics, oxide rupture strain, and crack tip strain rate (which includes creep). Previous research has shown that increasing the Cr content of Ni-9%Fe-Cr from 16 to 30 wt% strongly decreases PWSCC susceptibility. Consequently, measurements of these three fundamental parameters (repassivation, oxide rupture, and creep) were performed as a function of Cr content, and SCC crack growth rates were predicted on the basis of the resulting data. This paper illustrates that considering these three parameters concurrently may contribute to the understanding of Cr effects on PWSCC of Ni-base alloys. However, it is not clear whether the film-rupture/oxidation mechanism can adequately predict the observed crack growth rates for Alloy 600 at 338 C.
Download or read book Ninth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems written by Steve Bruemmer and published by John Wiley & Sons. This book was released on 2013-10-18 with total page 1776 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents an exchange of ideas among scientists and engineers about the economic and safety concerns surrounding environmentally induced materials problems which lead to nuclear power plant outages. Scientists and engineers concerned with the environmental degradation processes (corrosion, mechanical, and radiation effects) present their latest results on such topics as life extension/relicensing and materials problems associated with spent fuel storage and radioactive waste disposal. This collection will be of interest to utility engineers, reactor vendor engineers, plant architect engineers, researchers concerned with materials degradation, and consultants involved in design, construction, and operation of water reactors.
Download or read book Chemistry and Electrochemistry of Corrosion and Stress Corrosion Cracking written by Russell H. Jones and published by Society for Mining Metallurgy & Exploration. This book was released on 2001 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers from the 2001 TMS Annual Meeting held in New Orleans includes papers from the symposium on the chemistry and electrochemistry of corrosion and stress corrosion cracking. It covers topics such as chemistry differences between crack initiation and propagation.
Download or read book Fundamentals of Interface and Colloid Science written by J. Lyklema and published by Elsevier. This book was released on 2005-03-30 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume V is the counterpart of Volume IV and treats hydrophilic colloids and related items. Contains edited contributions on steric stabilization, depletion, polyelectrolytes, proteins at interfaces, association colloids, microemulsions, thin films, foams and emulsions. J. Lyklema is coauthor of two chapters and general editor. Other authors include: G.J. Fleer, F.A.M. Leermakers, M.A. Cohen Stuart, W. Norde, J.A.G. Buijs, J.C. Eriksson, T.Sottmann, R. Strey, D. Platikanov, D. Ekserova, V.Bergeron and P.Walstra. * This volume completes the prestigious series Fundamentals of Interface and Colloid Science* Together with Volume IV this book provides a comprehensive introduction to colloid science.* Explains and elaborates phenomena starting from basic principles and progresses to more advanced topics
Download or read book Basic Principles of Dispersions written by Tharwat F. Tadros and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-12-04 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of the Handbook of Colloid and Interface Science is a survey into the theory of dispersions in a variety of fields, as well as characterization by rheology. It is an ideal reference work for research scientists, universities, and industry practitioners looking for a complete understanding of how colloids and interfaces behave in the areas of materials science, chemical engineering, and colloidal science.
Download or read book Proceedings Gas liquid and liquid written by and published by . This book was released on 1957 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Principles of Formulation Types written by Tharwat F. Tadros and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-05-22 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of Formulation Science and Technology is a survey of the different types of formulations used in the chemical industry and offers numerous real-world examples of foams, gels, latexes etc. It offers in-depth explanations for research scientists, universities, and industry practitioners looking for a complete understanding of which type formulation works best for a certain application and why.
Download or read book Proceedings of the ASME JSME 4th International Conference on Nuclear Engineering 1996 written by Atam S. Rao and published by . This book was released on 1996 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foam Films and Foams written by Dotchi Exerowa and published by CRC Press. This book was released on 2018-07-27 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail the scientific philosophy of the formation and stabilization-destabilization of foams. It presents all hierarchical steps of a foam, starting from the properties of adsorption layers formed by foaming agents, discussing the properties of foam films as the building blocks of a foam, and then describing details of real foams, including many fields of application. The information presented in the book is useful to people working on the formulation of foams or attempting to avoid or destruct foams in unwanted situations.
Download or read book Automotive Paints and Coatings written by Hans-Joachim Streitberger and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its second edition and still the only book of its kind, this is an authoritative treatment of all stages of the coating process -- from body materials, paint shop design, and pre-treatment, through primer surfacers and top coats. New topics of interest covered are color control, specification and testing of coatings, as well as quality and supply concepts, while valuable information on capital and legislation aspects is given. Invaluable for engineers in the automotive and paints and coatings industry as well as for students in the field.
Download or read book Proceedings of the ASME JSME International Conference on Nuclear Engineering written by and published by . This book was released on 1996 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Predictive Capabilities in Environmentally Assisted Cracking written by American Society of Mechanical Engineers. Winter Annual Meeting and published by . This book was released on 1985 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Second International Congress of Surface Activity Gas liquid and liquid liquid interface written by and published by . This book was released on 1957 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings Gas written by J. H. Schulman and published by . This book was released on 1957 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Fracture Mechanics and its Applications written by Ashok Saxena and published by CRC Press. This book was released on 2022-12-27 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a comprehensive guide to fracture mechanics and its applications, providing an in-depth discussion of linear elastic fracture mechanics and a brief introduction to nonlinear fracture mechanics. It is an essential companion to the study of several disciplines such as aerospace, biomedical, civil, materials and mechanical engineering. This interdisciplinary textbook is also useful for professionals in several industries dealing with design and manufacturing of engineering materials and structures. Beginning with four foundational chapters, discussing the theory in depth, the book also presents specific aspects of how fracture mechanics is used to address fatigue crack growth, environment assisted cracking, and creep and creep-fatigue crack growth. Other topics include mixed-mode fracture and materials testing and selection for damage tolerant design, alongside in-depth discussions of ensuring structural integrity of components through real-world examples. There is a strong focus throughout the book on the practical applications of fracture mechanics. It provides a clear description of the theoretical aspects of fracture mechanics and also its limitations. Appendices provide additional background to ensure a comprehensive understanding and every chapter includes solved example problems and unsolved end of chapter problems. Additional instructor support materials are also available.
Download or read book Surface and Interfacial Tension written by Stanley Hartland and published by CRC Press. This book was released on 2004-03-11 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume offers complete coverage of the latest theoretical, experimental, and computer-based data as summarized by leading international researchers. It promotes full understanding of the physical phenomena and mechanisms at work in surface and interfacial tensions and gradients, their direct impact on interface shape and movement, and t
Download or read book Foams written by RobertK. Prud'homme and published by Routledge. This book was released on 2017-09-29 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the physics and physical processes of foam and foaming. It delineates various measurement techniques for characterizing foams and foam properties as well as the chemistry and application of foams. The use of foams in the textile industry, personal care products, enhanced oil recovery, firefighting and mineral floatation are highlighted, and the connection between the microstructure and physical properties of foam are detailed. Coverage includes nonaqueous foams and silicone antifoams, and more.
