Download or read book Measurement of Residual Stresses Using the Holographic Hole Drilling Technique written by Alberto Makino and published by . This book was released on 1994 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hole Drilling Method for Measuring Residual Stresses written by Gary S. and published by Springer Nature. This book was released on 2022-05-31 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the theory and practice of the Hole-Drilling Method for measuring residual stresses in engineering components. Such measurements are important because residual stresses have a "hidden" character because they exist locked-in within a material, independent of any external load. These stresses are typically created during component manufacture, for example, during welding, casting, or forming. Because of their hidden nature, residual stresses are difficult to measure and consequently are often ignored. However, they directly add to loading stresses and can cause catastrophic failure if not properly included during engineering design. Thus, there is an urgent need to be able to identify and measure residual stresses conveniently and reliably. The Hole-Drilling Method provides an adaptable and well-proven method for measuring residual stresses in a wide range of materials and component types. It is convenient to use and gives reliable results. Because of the hidden nature of residual stresses, the measurement method must necessarily be indirect, thus, additional care and conceptual understanding are necessary to achieve successful results. This book provides a practical introduction to the Hole-Drilling Method, starting from its historical roots and going on to focus on its modern practice. The various chapters describe the nature of residual stresses, the principle of hole-drilling measurements, procedures and guidance on how to make successful measurements, and effective mathematical procedures for stress computation and analysis. The book is intended for practitioners who need to make residual stress measurements either occasionally or routinely, for practicing engineers, for researchers, and for graduate engineering and science students.
Download or read book Handbook of Measurement of Residual Stresses written by Society for Experimental Mechanics (U.S.) and published by . This book was released on 1996 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from 24 authorities from around the world, this handbook provides the most authoritative reference resource available on the impact of residual stresses on mechanical properties of materials and structures. You'll find detailed descriptions of a full range of measuring techniques, including hole drilling, layer removal, sectioning, X-ray diffraction, neutron diffraction, and ultrasonic methods. A variety of case studies which illustrate use of specific techniques are included to facilitate your understanding. Design and structural engineers, metallurgists, and material scientists will find a wealth of valuable information covering recent developments in residual stress measuring techniques, with guidelines provided for selecting the right measuring strategy for each specific application, and many helpful tips for improving quality control.
Download or read book Practical Residual Stress Measurement Methods written by Gary S. Schajer and published by John Wiley & Sons. This book was released on 2013-08-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory and intermediate level handbook written in pragmatic style to explain residual stresses and to provide straightforward guidance about practical measurement methods. Residual stresses play major roles in engineering structures, with highly beneficial effects when designed well, and catastrophic effects when ignored. With ever-increasing concern for product performance and reliability, there is an urgent need for a renewed assessment of traditional and modern measurement techniques. Success critically depends on being able to make the most practical and effective choice of measurement method for a given application. Practical Residual Stress Measurement Methods provides the reader with the information needed to understand key residual stress concepts and to make informed technical decisions about optimal choice of measurement technique. Each chapter, written by invited specialists, follows a focused and pragmatic format, with subsections describing the measurement principle, residual stress evaluation, practical measurement procedures, example applications, references and further reading. The chapter authors represent both international academia and industry. Each of them brings to their writing substantial hands-on experience and expertise in their chosen field. Fully illustrated throughout, the book provides a much-needed practical approach to residual stress measurements. The material presented is essential reading for industrial practitioners, academic researchers and interested students. Key features: • Presents an overview of the principal residual stress measurement methods, both destructive and non-destructive, with coverage of new techniques and modern enhancements of established techniques • Includes stand-alone chapters, each with its own figures, tables and list of references, and written by an invited team of international specialists
Download or read book Residual Stresses in Composite Materials written by Mahmood M. Shokrieh and published by Woodhead Publishing. This book was released on 2014-02-14 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual stresses are a common phenomenon in composite materials. They can either add to or significantly reduce material strength. Because of the increasing demand for high-strength, light-weight materials such as composites and their wide range of applications in the aerospace and automotive industries, in civil infrastructure and in sporting applications, it is critical that the residual stresses of composite materials are understood and measured correctly.The first part of this important book reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses. Various mathematical (analytical and numerical) methods for calculation of residual stresses in composite materials are also presented. Chapters in the first section of the book discuss the simulated hole drilling method, the slitting/crack compliance method, measuring residual stresses in homogeneous and composite glass materials using photoelastic techniques, and modeling residual stresses in composite materials. The second part of the book discusses residual stresses in polymer matrix, metal-matrix and a range of other types of composites. Moreover, the addition of nanoparticles to the matrix of polymeric composites as a new technique for reduction of residual stresses is discussed.Residual stresses in composite materials provides a comprehensive overview of this important topic, and is an invaluable reference text for both academics and professionals working in the mechanical engineering, civil engineering, aerospace, automotive, marine and sporting industries. - Reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses - Discusses residual stresses in polymer matrix, metal-matrix and other types of composite - Considers the addition of nanoparticles to the matrix of polymeric composites as a new technique for reduction of residual stresses
Download or read book Experimental and Applied Mechanics Volume 6 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-06-01 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: This the sixth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 128 chapters on Experimental and Applied Mechanics. It presents early findings from experimental and computational investigations including High Accuracy Optical Measurements of Surface Topography, Elastic Properties of Living Cells, Standards for Validating Stress Analyses by Integrating Simulation and Experimentation, Efficiency Enhancement of Dye-sensitized Solar Cell, and Blast Performance of Sandwich Composites With Functionally Graded Core.
Download or read book Practical Residual Stress Measurement Methods written by Gary S. Schajer and published by John Wiley & Sons. This book was released on 2013-09-23 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory and intermediate level handbook written in pragmatic style to explain residual stresses and to provide straightforward guidance about practical measurement methods. Residual stresses play major roles in engineering structures, with highly beneficial effects when designed well, and catastrophic effects when ignored. With ever-increasing concern for product performance and reliability, there is an urgent need for a renewed assessment of traditional and modern measurement techniques. Success critically depends on being able to make the most practical and effective choice of measurement method for a given application. Practical Residual Stress Measurement Methods provides the reader with the information needed to understand key residual stress concepts and to make informed technical decisions about optimal choice of measurement technique. Each chapter, written by invited specialists, follows a focused and pragmatic format, with subsections describing the measurement principle, residual stress evaluation, practical measurement procedures, example applications, references and further reading. The chapter authors represent both international academia and industry. Each of them brings to their writing substantial hands-on experience and expertise in their chosen field. Fully illustrated throughout, the book provides a much-needed practical approach to residual stress measurements. The material presented is essential reading for industrial practitioners, academic researchers and interested students. Key features: • Presents an overview of the principal residual stress measurement methods, both destructive and non-destructive, with coverage of new techniques and modern enhancements of established techniques • Includes stand-alone chapters, each with its own figures, tables and list of references, and written by an invited team of international specialists
Download or read book Measurement of residual stress using the centre hole drilling procedure written by B. L. Wotton and published by . This book was released on 1978 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Residual Stresses in Composite Materials written by Mahmood M. Shokrieh and published by Woodhead Publishing. This book was released on 2021-06-22 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The residual stress is a common phenomenon in composite materials. They can either add to or significantly reduce material strength. Because of the increasing demand for high-strength, lightweight materials such as composites and their wide range of applications; it is critical that the residual stresses of composite materials are understood and measured correctly.The first edition of this book consists of thirteen chapters divided into two parts. The first part reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses. There are also additional chapters on using mathematical (analytical and numerical) methods for the calculation of residual stresses in composite materials. These include the simulated hole drilling method, the slitting/crack compliance method, measuring residual stresses in homogeneous and composite glass materials using photoelastic techniques, and modeling residual stresses in composite materials. The second part of the book discusses measuring residual stresses in different types of composites including polymer and metal matrix composites. The addition of nanoparticles to the matrix of polymeric composites as a new technique for the reduction of residual stresses is also discussed.In the Second Edition of this book, each of the original chapters of the first edition has been fully updated, taking into account the latest research and new developments. There are also five new chapters on the theoretical and experimental studies of residual stresses in the composite integrated circuits; residual stresses in additive manufacturing of polymers and polymer matrix composites; residual stresses in metal matrix composites fabricated by additive manufacturing; the eigenstrain based method for the incremental hole-drilling technique; and the estimation of residual stresses in polymer matrix composites using the digital image correlation technique.Residual Stresses in Composite Materials, Second Edition, provides a unique and comprehensive overview of this important topic and is an invaluable reference text for both academics and professionals working in the mechanical engineering, civil engineering, aerospace, automotive, marine, and sporting industries. - Presents the latest developments on theoretical and experimental studies of residual stresses in composites - Reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses - Discusses residual stresses in the polymer matrix, metal matrix, and ceramic matrix composites - Considers the addition of nanoparticles to the matrix as a new technique for reduction of residual stresses in polymeric composites - Introduces the latest advancements of research on the residual stresses in additive-manufactured polymer and metal matrix composites
Download or read book Residual Stress Thermomechanics Infrared Imaging Hybrid Techniques and Inverse Problems Volume 9 written by Simon Quinn and published by Springer. This book was released on 2016-09-19 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 9 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the ninth volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Damage Analysis from Thermal Measurements Quantitative Visualization Stress Analysis from Thermal Measurements New Approaches to Residual Stress Measurement Residual Stress & Optical Methods Non-homogeneous Parameters Identification General Inverse Methods Residual Stress Measurement by X-Ray Diffraction
Download or read book A Contribution to Enlarge the Application Limits of Residual Stress Analyses by the Hole Drilling and the Ring Core Method written by Andreas Nau and published by kassel university press GmbH. This book was released on 2016-01-01 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The measurement of residual stresses by the incremental hole drilling technique written by P. V. Grant and published by . This book was released on 2002 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Calibration and Measurement of Residual Stresses by the Deep Hole Drilling Technique written by Bin Su and published by . This book was released on 2009 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental and Applied Mechanics Volume 4 written by Carlos E. Ventura and published by Springer Science & Business Media. This book was released on 2012-11-29 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental and Applied Mechanics, Volume 4: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, the fourth volume of seven from the Conference, brings together 54 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on: Fracture & Fatigue Microscale & Microstructural Effects in Fatigue & Fracture Material Applications Composite Characterization Using Digital Image Correlation Techniques Multi-Scale Simulation and Testing of Composites Residual Stress Inverse Problems/Hybrid Methods Nano-Composites Microstructure Material Characterization Modeling and Uncertainty Quantification Impact Behavior of Composites
Download or read book Quantifying Uncertainity in Residual Stress Measurement Using Hole Drilling Techniques written by Devkumar Murugesh Goudar and published by . This book was released on 2011 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Residual Stress Thermomechanics Infrared Imaging Hybrid Techniques and Inverse Problems Volume 9 written by Sven Bossuyt and published by Springer. This book was released on 2015-10-29 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual Stress, Thermomechanics& Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 9 of the Proceedings of the 2015SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Inverse Methods Inverse Methods in Plasticity Varying Length Scales Harsh Environments Opto-Acoustical Methods Hybrid Experimental Residual Stress Modelling and Advances in Measurements Thermomechanics General Material Response Infrared Imaging
Download or read book Springer Handbook of Experimental Solid Mechanics written by William N. Sharpe, Jr. and published by Springer Science & Business Media. This book was released on 2008-12-04 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Experimental Solid Mechanics documents both the traditional techniques as well as the new methods for experimental studies of materials, components, and structures. The emergence of new materials and new disciplines, together with the escalating use of on- and off-line computers for rapid data processing and the combined use of experimental and numerical techniques have greatly expanded the capabilities of experimental mechanics. New exciting topics are included on biological materials, MEMS and NEMS, nanoindentation, digital photomechanics, photoacoustic characterization, and atomic force microscopy in experimental solid mechanics. Presenting complete instructions to various areas of experimental solid mechanics, guidance to detailed expositions in important references, and a description of state-of-the-art applications in important technical areas, this thoroughly revised and updated edition is an excellent reference to a widespread academic, industrial, and professional engineering audience.
