Download or read book Measurement of Residual and Applied Stress Using Neutron Diffraction written by M.T. Hutchings and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accurate, absolute, and non-destructive measurement of residual stress fields within metallic, ceramic, and composite engineering components has been one of the major problems facing engineers for many years, and so the extension of X-ray methods to the use of neutrons represents a major advance. The technique utilizes the unique penetrating power of the neutron into most engineering materials, combined with the sensitivity of diffraction, to measure the separation of lattice planes within grains of polycrystalline engineering materials, thus providing an internal strain gauge. The strain is then converted to stress using calibrated elastic constants. It was just over ten years ago that the initial neutron diffraction measurements of residual stress were carried out, and during the ensuing decade measurements have commenced at most steady state reactors and pulsed sources around the world. So swift has been the development of the field that, in addition to fundamental scientific studies, commercial measurements have been made on industrial components for several years now. The use of neutrons is ideally suited to the determination of triaxial macrostress tensors, macrostress gradients, and microstresses in composites and multiphase alloys as well as deformed, plastically anisotropic metals and alloys. To date, it has been used to investigate welded and heat-treated industrial components, to characterize composites, to study the response of material under applied loads, to calibrate more portable methods such as ultrasonics, and to verify computer modelling calculations of residual and applied stress.
Download or read book Introduction to the Characterization of Residual Stress by Neutron Diffraction written by M.T. Hutchings and published by CRC Press. This book was released on 2005-02-28 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 25 years the field of neutron diffraction for residual stress characterization has grown tremendously, and has matured from the stage of trial demonstrations to provide a practical tool with widespread applications in materials science and engineering. While the literature on the subject has grown commensurately, it has also remained
Download or read book Analysis of Residual Stress by Diffraction using Neutron and Synchrotron Radiation written by M.E. Fitzpatrick and published by CRC Press. This book was released on 2003-02-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: While residual stress can be a problem in many industries and lead to early failure of component, it can also be introduced deliberately to improve lifetimes. Knowledge of the residual stress state in a component can be critical for quality control of surface engineering processes or vital to performing an accurate assessment of component life unde
Download or read book Practical Residual Stress Measurement Methods written by Gary S. Schajer and published by John Wiley & Sons. This book was released on 2013-09-23 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory and intermediate level handbook written in pragmatic style to explain residual stresses and to provide straightforward guidance about practical measurement methods. Residual stresses play major roles in engineering structures, with highly beneficial effects when designed well, and catastrophic effects when ignored. With ever-increasing concern for product performance and reliability, there is an urgent need for a renewed assessment of traditional and modern measurement techniques. Success critically depends on being able to make the most practical and effective choice of measurement method for a given application. Practical Residual Stress Measurement Methods provides the reader with the information needed to understand key residual stress concepts and to make informed technical decisions about optimal choice of measurement technique. Each chapter, written by invited specialists, follows a focused and pragmatic format, with subsections describing the measurement principle, residual stress evaluation, practical measurement procedures, example applications, references and further reading. The chapter authors represent both international academia and industry. Each of them brings to their writing substantial hands-on experience and expertise in their chosen field. Fully illustrated throughout, the book provides a much-needed practical approach to residual stress measurements. The material presented is essential reading for industrial practitioners, academic researchers and interested students. Key features: • Presents an overview of the principal residual stress measurement methods, both destructive and non-destructive, with coverage of new techniques and modern enhancements of established techniques • Includes stand-alone chapters, each with its own figures, tables and list of references, and written by an invited team of international specialists
Download or read book Introduction to the Characterization of Residual Stress by Neutron Diffraction written by M.T. Hutchings and published by CRC Press. This book was released on 2005-02-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 25 years the field of neutron diffraction for residual stress characterization has grown tremendously, and has matured from the stage of trial demonstrations to provide a practical tool with widespread applications in materials science and engineering. While the literature on the subject has grown commensurately, it has also remained
Download or read book Measurement of Residual Stress in Materials Using Neutrons written by International Atomic Energy Agency and published by . This book was released on 2005 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stress develops during the synthesis and use of materials such as alloys and compounds. Measurement of residual stress is essential to improve the quality of synthesized materials and diagnosis of failure and/or reliability of fabricated components.
Download or read book Structural and Residual Stress Analysis by Nondestructive Methods written by V. Hauk and published by Elsevier. This book was released on 1997-11-10 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of stress analysis has gained its momentum from the widespread applications in industry and technology and has now become an important part of materials science. Various destructive as well as nondestructive methods have been developed for the determination of stresses. This timely book provides a comprehensive review of the nondestructive techniques for strain evaluation written by experts in their respective fields. The main part of the book deals with X-ray stress analysis (XSA), focussing on measurement and evaluation methods which can help to solve the problems of today, the numerous applications of metallic, polymeric and ceramic materials as well as of thin-film-substrate composites and of advanced microcomponents. Furthermore it contains data, results, hints and recommendations that are valuable to laboratories for the certification and accreditation of their stress analysis. Stress analysis is an active field in which many questions remain unsettled. Accordingly, unsolved problems and conflicting results are discussed as well. The assessment of the experimentally determined residual and structural stress states on the static and dynamic behavior of materials and components is handled in a separate chapter. Students and engineers of materials science and scientists working in laboratories and industries will find this book invaluable.
Download or read book Applications of Neutron Powder Diffraction written by Erich H. Kisi and published by Oxford University Press. This book was released on 2012-09-27 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book covering the theory, practicalities, and the extensive applications of neutron powder diffraction in materials science, physics, chemistry, mineralogy, and engineering. The broad coverage should be accessible to graduate students and senior undergraduates in science and engineering, as well as lecturers and researchers.
Download or read book Handbook of Measurement of Residual Stresses written by Society for Experimental Mechanics (U.S.) and published by . This book was released on 1996 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from 24 authorities from around the world, this handbook provides the most authoritative reference resource available on the impact of residual stresses on mechanical properties of materials and structures. You'll find detailed descriptions of a full range of measuring techniques, including hole drilling, layer removal, sectioning, X-ray diffraction, neutron diffraction, and ultrasonic methods. A variety of case studies which illustrate use of specific techniques are included to facilitate your understanding. Design and structural engineers, metallurgists, and material scientists will find a wealth of valuable information covering recent developments in residual stress measuring techniques, with guidelines provided for selecting the right measuring strategy for each specific application, and many helpful tips for improving quality control.
Download or read book Residual Stresses 2016 written by Thomas M. Holden and published by Materials Research Forum LLC. This book was released on 2017-03-15 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Residual Stresses 10 and is devoted to the prediction/modelling, evaluation, control, and application of residual stresses in engineering materials. New developments, on stress-measurement techniques, on modelling and prediction of residual stresses and on progress made in the fundamental understanding of the relation between the state of residual stress and the material properties, are highlighted. The proceedings offer an overview of the current understanding of the role of residual stresses in materials used in wide ranging application areas.
Download or read book Residual Stresses 2018 written by Marc Seefeldt and published by Materials Research Forum LLC. This book was released on 2018-10-10 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Conference on Residual Stresses (ECRS) series is the leading European forum for scientific exchange on internal and residual stresses in materials. It addresses both academic and industrial experts and covers a broad gamut of stress-related topics from instrumentation via experimental and modelling methodology up to stress problems in specific processes such as welding or shot-peening, and their impact on materials properties. Chapters: Diffraction Methods; Mechanical Relaxation Methods; Acoustic and Electromagnetic Methods; Composites, Nano and Microstructures; Films, Coatings and Oxides; Cold Working and Machining; Heat Treatments and Phase Transformations; Welding, Fatigue and Fracture: Stresses in Additive Manufacturing.
Download or read book Development and Applications of Residual Stress Measurements Using Neutron Beams written by International Atomic Energy Agency and published by . This book was released on 2014 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is the result of an IAEA coordinated research project and presents a survey of the basic principles, requirements, preparation, design, execution and standardisation of residual stress measurements using neutron beams. It includes details of experimental techniques, associated equipment and instrumentation, their commissioning and calibration, control and data acquisition. A separate chapter is dedicated to data analysis and interpretation. At the end, the document provides, with a number of selected examples, applications of residual stress measurements as well as future trends for development and use of this powerful technique. The publication is a comprehensive and useful resource to the neutron beam user community including academia and industrial partners. It may serve as an introduction to the field for young researchers and graduate students as well as guidelines to those operating or planning to implement/modernise their facilities for residual stress measurements. Ultimately, the document presents neutron beams as a valuable and effective tool for performing residual stress measurements both for basic research and various applications.
Download or read book Springer Handbook of Experimental Solid Mechanics written by William N. Sharpe, Jr. and published by Springer Science & Business Media. This book was released on 2008-12-04 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Experimental Solid Mechanics documents both the traditional techniques as well as the new methods for experimental studies of materials, components, and structures. The emergence of new materials and new disciplines, together with the escalating use of on- and off-line computers for rapid data processing and the combined use of experimental and numerical techniques have greatly expanded the capabilities of experimental mechanics. New exciting topics are included on biological materials, MEMS and NEMS, nanoindentation, digital photomechanics, photoacoustic characterization, and atomic force microscopy in experimental solid mechanics. Presenting complete instructions to various areas of experimental solid mechanics, guidance to detailed expositions in important references, and a description of state-of-the-art applications in important technical areas, this thoroughly revised and updated edition is an excellent reference to a widespread academic, industrial, and professional engineering audience.
Download or read book Welding Deformation and Residual Stress Prevention written by Ninshu Ma and published by Elsevier. This book was released on 2012-04-26 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generally, welding produces welding deformation and residual stress in the products, which influences the quality and performance of the products. Although many engineers and researchers have made great effort how to control these incidents, they have still remained unresolved. Welding Deformation and Residual Stress Prevention provides a unique computational approach to the prediction of the effects of deformation and residual stress on materials. The goal is to provide engineers and designers with the ability to create their own computational system for predicting and possibly avoiding the problem altogether. The basic theories including "theory of elastic-plastic analysis" and "inherent strain theory" , and analysis procedures are described using a simple three-bar model Online simulation software to perform basic analysis on welding mechanics Examples of strategic methods and procedures are illustrated to have solved various welding-related problems encountered in the process of construction Appendices present data bases for welding residual stresses, temperature dependent material properties, etc.
Download or read book Residual Stress Measurements written by American Society for Metals and published by . This book was released on 1952 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Challenges in Residual Stress Measurements and Evaluation written by Caterina Casavola and published by BoD – Books on Demand. This book was released on 2020-07-22 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual stresses (RS) are stresses present inside materials even in the absence of any applied load. They are of capital importance because they can impact greatly on the mechanical strength of the material, on its dimensional correspondence to design specifications as well as on the fatigue life of the part. RS measurement and evaluation is currently an important research topic where a lot of challenges still need to be addressed. This book aims to provide the reader with an overview of the principal novelties in this field including current limitations and potential future developments. Both radically new experimental approaches as well as recent evolutions of consolidated ones will be presented, along with the latest novelties in the area of numerical residual stress evaluation.
Download or read book Residual Stresses in Science and Technology written by Eckard Macherauch and published by I R Publications, Limited. This book was released on 1987 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
