Download or read book Specific Interactions and the Miscibility of Polymer Blends written by Michael M. Coleman and published by CRC Press. This book was released on 1995-11-01 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book with software provides powerful tools for the analysis, prediction and creation of new polymer blends, an area of significant commercial potential. The R&D approaches and methods described in the book have attracted the interest of polymer R&D leaders in industry, and have been put into use in several major chemical companies. The companion set of computer programs speeds and facilitates work in this area. FROM THE AUTHORS' PREFACE: During the 1980's a steadily increasing number of compatible systems [polymer blends] have been reported. We believe that miscible mixtures will prove to be fairly common and the purpose of this book is to explore the circumstances in which single phase materials can be obtained. We will also describe a model for the phase behavior of these mixtures which we believe to have a predictive value, or be used as a practical guide to polymer miscibility. Our approach is based on the use of association models which have until recently been largely ignored in treating hydrogen bonding in polymer mixtures. They have most frequently been applied to mixtures of alcohols with simple hydrocarbons, where the equilibrium constants used to describe association have most frequently been determined by a fit to thermodynamic data (e.g., vapor pressures, heat of mixing). In our work we have sought to, first, adapt this approach to a description of the phase behavior of polymer mixtures; second, develop spectroscopic methods that provide an independent measurement of the equilibrium constants. Our purpose in this book is to explore and describe this approach and illustrate its broad utility. We address two overlapping yet different audiences. One would be primarily interested in the broad nature of this approach and the practical applications of a simple model. The second would be more interested in the derivations of the equations and some of the fundamental aspects of the spectroscopy of these systems. Accordingly this book is in the form of a sandwich. We begin with a brief introduction to theories of mixing and the phase behavior of polymeric mixtures, followed by a practical guide to polymer miscibility. This chapter also serves to identify the types of systems in which, by copolymerization or other means, one might introduce the appropriate hydrogen bonding functional groups and obtain a miscible system. The [main substance] of this book is in [the] chapters where fundamental aspects of hydrogen bonds, spectroscopy and the application of association models are described. We also offer [separately] computer programs that calculate and display many of the important quantities described in this book (e.g., the stoichiometry of hydrogen bonding and its relationship to infrared measurements, phase behavior, etc.). In our view one can obtain a good feel for the miscibility of many systems with these programs.

Download or read book Specific Interactions and the Miscibility of Polymer Blends written by Michael M. Coleman and published by CRC Press. This book was released on 2017-11-13 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book with software provides powerful tools for the analysis, prediction and creation of new polymer blends, an area of significant commercial potential. The R&D approaches and methods described in the book have attracted the interest of polymer R&D leaders in industry, and have been put into use in several major chemical companies. The companion set of computer programs speeds and facilitates work in this area. FROM THE AUTHORS' PREFACE: During the 1980's a steadily increasing number of compatible systems [polymer blends] have been reported. We believe that miscible mixtures will prove to be fairly common and the purpose of this book is to explore the circumstances in which single phase materials can be obtained. We will also describe a model for the phase behavior of these mixtures which we believe to have a predictive value, or be used as a practical guide to polymer miscibility. Our approach is based on the use of association models which have until recently been largely ignored in treating hydrogen bonding in polymer mixtures. They have most frequently been applied to mixtures of alcohols with simple hydrocarbons, where the equilibrium constants used to describe association have most frequently been determined by a fit to thermodynamic data (e.g., vapor pressures, heat of mixing). In our work we have sought to, first, adapt this approach to a description of the phase behavior of polymer mixtures; second, develop spectroscopic methods that provide an independent measurement of the equilibrium constants. Our purpose in this book is to explore and describe this approach and illustrate its broad utility. We address two overlapping yet different audiences. One would be primarily interested in the broad nature of this approach and the practical applications of a simple model. The second would be more interested in the derivations of the equations and some of the fundamental aspects of the spectroscopy of these systems. Accor

Download or read book Measurement of Miscibility and Interaction in Polymer Blends written by Rajesh Harinarayan Somani and published by . This book was released on 1983 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Polymer Miscibility written by Olagoke Olabis and published by Elsevier. This book was released on 2012-12-02 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer–Polymer Miscibility discusses miscibility of polymeric mixtures. This book explains the theoretical and practical aspects of polymer miscibility, which has become a considerable area of research in many academic and industrial laboratories. Comprised of seven chapters, this book starts with an overview of the physical nature of the variations of the basic polymer structure. This monograph then discusses the two cases of miscible polymer blends, namely, poly(vinyl chloride) (PVC)–butadiene/acrylonitrile copolymer (NBR) and polystyrene–poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) blends. This text explores the useful and unique properties of blends of poly(vinyl chloride) and butadiene/acrylonitrile copolymer rubber. Other chapters discuss the thermodynamic theories for the phase separation of block copolymers. The reader is also introduced to other variations of chemical structure, which can result in the permanent attachment of polymers to each other through block and graft copolymers. This text also explores the feasibility of covalent bonding of polymer components. This book is intended for chemical engineers and materials scientists.

Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.

Download or read book Polymer Blends Handbook written by L. A. Utracki and published by . This book was released on 2014-01-31 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of highly respected contributors, this fundamental reference work covers all aspects of polymer blends: science, engineering, technology and applications.

Download or read book Polymer Blends Volume 1 written by Donald R Paul and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Blends, Volume 1 highlights the importance of polymer blends as a major new branch of macromolecular science. Topics range from polymer-polymer compatibility and the statistical thermodynamics of polymer blends to the phase separation behavior of polymer-polymer mixtures, transport phenomena in polymer blends, and mechanical properties of multiphase polymer blends. The optical behavior, solid state transition behavior, and rheology of polymer blends are also discussed. This book is organized into 10 chapters and begins with an overview of polymer blends, with emphasis on terminology and the effect of molecular weight on the thermodynamics of polymer blends as well as phase equilibria and transitions. The discussion then turns to the miscibility of homopolymers and copolymers, in bulk and in solution, from the experimental and theoretical viewpoints. The chapters that follow explore the statistical thermodynamics of polymer blends, paying particular attention to the Flory and lattice fluid theories, along with the phase relationship in polymer mixtures. The interfacial energy, structure, and adhesion between polymers in relation to the properties of polymer blends are considered. The final chapter examines the phenomena of low molecular weight penetrant transport. Currently accepted models for unsteady-state and steady-state permeation of polymeric materials are presented. A discussion of unsteady-state absorption and desorption behavior observed in a variety of polymer blends complements the treatment of permeation behavior. This book is intended to provide academic and industrial research scientists and technologists with a broad background in current principles and practice concerning mixed polymer systems.

Download or read book Nanostructured Polymer Blends written by Chandran C. Sarath and published by Elsevier Inc. Chapters. This book was released on 2013-11-28 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Miscibility and compatibility in polymer blends is a topic of great academic and industrial importance. This is because miscibility and compatibility contribute to morphology, properties, and performance. Miscibility results in one phase; compatibility creates a disperse phase with size and stability determined by interfacial interactions. Miscible polymer properties are averaged similar to a plasticizer polymer, and compatible polymers retain properties of each component, such as toughening or reinforcement. With miscible polymer blends the continuous phase dominates properties; the disperse phase contributes via stress transfer. This chapter revisits the criteria for miscibility or compatibility in polymer blends and the contributors of compatibility compared with miscibility and incompatibility. Development of copolymers and their blending with thermosets and thermoplastics result in complex two-phase morphologies. The dynamics of phase separation observed in polymer blends leading to different morphologies and the criteria for phase separation is explained. A nanometer-dispersed phase requires strong interfacial interactions to stabilize the large interfacial area, and this is favored by rapid spinodal phase separation compared with size diminution by high shear. Nanoblends open up a new arena for polymer blends, and research shows that nanoblends have outstanding optical and mechanical properties.

Download or read book Polymer Blends and Alloys written by George P. Simon and published by Routledge. This book was released on 2019-07-16 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distinguishing among blends, alloys and other types of combinations, clarifying terminology and presenting data on new processes and materials, this work present up-to-date and effective compounding techniques for polymers. It offers extensive analyses on the challenging questions that surround miscibility, compatibility, dynamic processing, interaction/phase behaviour, and computer simulations for predicting behaviours of polymer mixture and interaction.

Download or read book Direct Measurement of Miscibility in Polymer Blends by Melt Titration written by Rajesh Harinarayan Somani and published by . This book was released on 1981 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Blends and Alloys written by George P. Simon and published by Routledge. This book was released on 2019-07-16 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distinguishing among blends, alloys and other types of combinations, clarifying terminology and presenting data on new processes and materials, this work present up-to-date and effective compounding techniques for polymers. It offers extensive analyses on the challenging questions that surround miscibility, compatibility, dynamic processing, interaction/phase behaviour, and computer simulations for predicting behaviours of polymer mixture and interaction.

Download or read book Nanostructured Immiscible Polymer Blends written by Suprakas Sinha Ray and published by Elsevier. This book was released on 2019-09-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Immiscible Polymer Blends: Migration and Interface covers a wide range of nanoparticle types, emphasizing the mechanisms and parameters involved in the migration of nanofillers inside immiscible polymer blends. This book explores the influence of nanoparticle migration on the localization, and hence, morphology development, electrical conductivity, and met-rheological properties of blended composite materials. As the influence of solid particles, ranging in size from several hundred nanometers to a few microns in immiscible polymer blends has been extensively studied for use as compatibilizers, morphology stabilizers, and reinforcement agents, this book is a timely resource. - Outlines techniques used to prepare nanoparticles-modified immiscible polymer blend composites - Explains the structural and morphological development, and melt-state rheological behaviors of nanoparticles-modified immiscible polymer blend composites - Discusses major industrial applications

Download or read book Nanostructured Polymer Blends written by Sabu Thomas and published by William Andrew. This book was released on 2013-11-28 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 30% of commercial polymers are blends or alloys or one kind or another. Nanostructured blends offer the scientist or plastics engineer a new range of possibilities with characteristics including thermodynamic stablility; the potential to improve material transparency, creep and solvent resistance; the potential to simultaneously increase tensile strength and ductility; superior rheological properties; and relatively low cost. Nanostructured Polymer Blends opens up immense structural possibilities via chemical and mechanical modifications that generate novel properties and functions and high-performance characteristics at a low cost. The emerging applications of these new materials cover a wide range of industry sectors, encompassing the coatings and adhesives industry, electronics, energy (photovoltaics), aerospace and medical devices (where polymer blends provide innovations in biocompatible materials). This book explains the science of nanostructure formation and the nature of interphase formations, demystifies the design of nanostructured blends to achieve specific properties, and introduces the applications for this important new class of nanomaterial. All the key topics related to recent advances in blends are covered: IPNs, phase morphologies, composites and nanocomposites, nanostructure formation, the chemistry and structure of additives, etc. - Introduces the science and technology of nanostructured polymer blends – and the procedures involved in melt blending and chemical blending to produce new materials with specific performance characteristics - Unlocks the potential of nanostructured polymer blends for applications across sectors, including electronics, energy/photovoltaics, aerospace/automotive, and medical devices (biocompatible polymers) - Explains the performance benefits in areas including rheological properties, thermodynamic stablility, material transparency, solvent resistance, etc.

Download or read book Polymer Blends written by Lloyd M. Robeson and published by Hanser Gardner Publications. This book was released on 2007 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been well-recognized that polymer blends offer a key option in solving emerging application requirements. The ability to combine existing polymers into new compositions with commercializable properties offers the advantage of reduced research and development expense compared to the development of new monomers and polymers to yield a similar property profile. An additional advantage is the much lower capital expense involved with scale-up and commercialization. Another specific advantage of polymer blends versus new monomer/polymer compositions is that blends often offer property profile combinations not easily obtained with new polymeric structures. In the rapidly emerging technology landscape, polymer blend technology can quickly respond to developing needs.

Download or read book Spectroscopic Techniques for Polymer Characterization written by Yukihiro Ozaki and published by John Wiley & Sons. This book was released on 2021-10-29 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: An insightful exploration of cutting-edge spectroscopic techniques in polymer characterization In Spectroscopic Techniques for Polymer Characterization: Methods, Instrumentation, Applications, a team of distinguished chemists delivers a comprehensive exploration of the vast potential of spectroscopic characterization techniques in polymer research. The book offers a concise outline of the principles, advantages, instrumentation, experimental techniques, and noteworthy applications of cutting-edge spectroscopy. Covering a wide range of polymers, from nylon to complex polymeric nanocomposites, the author presents recent developments in polymer science to polymer, analytical, and material chemists, assisting them in keeping track of the progress in modern spectroscopy. Spectroscopic Techniques for Polymer Characterization contains contributions from pioneers in modern spectroscopic techniques from around the world. The included materials bridge the gap between spectroscopists, polymer scientists, and engineers in academia and industry. The book also offers: A thorough introduction to the progress in spectroscopic techniques, including polymer spectroscopy and near-infrared spectroscopy Comprehensive explorations of topical polymers studied by spectroscopy, including polymer thin films, fluoropolymers, polymer solutions, conductive polymers Practical discussions of infrared imaging, near-infrared imaging, two-dimensional correlation spectroscopy, and far-ultraviolet spectroscopy In-depth examinations of spectroscopic studies of weak hydrogen bonding in polymers Spectroscopic Techniques for Polymer Characterization: Methods, Instrumentation, Applications is a must-read reference for polymer, analytical, and physical chemists, as well as materials scientists and spectroscopists seeking a one-stop resource for polymer characterization using spectroscopic analyses.

Download or read book Interactions in Miscible Polymer Blends written by Donald R. Paul and published by . This book was released on 1988 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research has been concerned with learning more about the energetic interactions between the segments of polymers and how they affect the phase behavior and the physical properties of polymer blends. A primary tool for quantitative investigation of these interactions has been the calorimetric measurement of heats of mixing between low molecular weight liquids having structures similar to those of polymers of interest. In this way, it has been possible to simulate both intermolecular and intramolecular interactions that are important in blend phase behavior and properties. Various theories have been employed to utilize this information including one that permits prediction of miscibility by a group contribution method. Several new miscible blend systems were identified, e.g. polycarbonate/poly(methyl methacrylate), and several ways to use copolymerization to manipulate phase behavior were demonstrated. Keywords: Polymer blends, Copolymers, Permeation, Miscibility, Calorimetry, Spectroscopy, Sorption, Rubber toughening, Liquid crystalline polymer, Polycarbonates, Methacrylates, Acrylates, Styrenics, Adhesion.

Download or read book Amorphous Solid Dispersions written by Navnit Shah and published by Springer. This book was released on 2014-11-21 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers a comprehensive guide on the theory and practice of amorphous solid dispersions (ASD) for handling challenges associated with poorly soluble drugs. In twenty-three inclusive chapters, the book examines thermodynamics and kinetics of the amorphous state and amorphous solid dispersions, ASD technologies, excipients for stabilizing amorphous solid dispersions such as polymers, and ASD manufacturing technologies, including spray drying, hot melt extrusion, fluid bed layering and solvent-controlled micro-precipitation technology (MBP). Each technology is illustrated by specific case studies. In addition, dedicated sections cover analytical tools and technologies for characterization of amorphous solid dispersions, the prediction of long-term stability, and the development of suitable dissolution methods and regulatory aspects. The book also highlights future technologies on the horizon, such as supercritical fluid processing, mesoporous silica, KinetiSol®, and the use of non-salt-forming organic acids and amino acids for the stabilization of amorphous systems. Amorphous Solid Dispersions: Theory and Practice is a valuable reference to pharmaceutical scientists interested in developing bioavailable and therapeutically effective formulations of poorly soluble molecules in order to advance these technologies and develop better medicines for the future.