Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Automotive Fuels Reference Book written by Paul Richards and published by SAE International. This book was released on 2014-03-05 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.
Download or read book Technical Note National Advisory Committee for Aeronautics written by United States. National Advisory Committee for Aeronautics and published by . This book was released on with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical and Experimental Studies on Combustion Engines and Vehicles written by Paweł Woś and published by BoD – Books on Demand. This book was released on 2020-11-26 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The matters discussed and presented in the chapters of this book cover a wide spectrum of topics and research methods commonly used in the field of engine combustion technology and vehicle functional systems. This book contains the results of both computational analyses and experimental studies on jet and reciprocating combustion engines as well heavy-duty onroad vehicles. Special attention is devoted to research and measures toward preventing the emission of harmful exhaust components, reducing fuel consumption or using unconventional methods of engine fueling or using renewable and alternative fuels in different applications. Some technical improvements in design and control of vehicle systems are also presented.
Download or read book Fuel Engine Interactions written by Gautam Kalghatgi and published by SAE International. This book was released on 2013-10-08 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional fossil fuels will constitute the majority of automotive fuels for the foreseeable future but will have to adapt to changes in engine technology. Unconventional transport fuels such as biofuels, gas-to-liquid fuels, compressed natural gas, and liquid petroleum gas will also play a role. Hydrogen might be a viable transport fuel if it overcomes barriers in production, transport, storage, and safety and/or if fuel cells become viable. This book opens by considering these issues and then introduces practical transport fuels. A chapter on engine deposits follows, which is an important practical topic about how fuels affect engines that is not usually considered in other books. The next three chapters discuss auto-ignition phenomena in engines. The auto-ignition resistance of fuels is the most important fuel property since it limits the efficiency of spark ignition engines and determines the performance of compression ignition engines. Moreover, the manufacture of fuels is primarily driven by the need to meet auto-ignition quality demands set by fuel specifications. The final chapter considers the implications for future fuels. The book covers the many important ways that fuels and engines interact and why and how fuels will need to change to meet the requirements of future engines, as well as the implications for fuels manufacture and specifications.
Download or read book The Flow of a Compressible Fluid Past a Sphere written by Carl Kaplan and published by . This book was released on 1940 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: The flow of a compressible fluid past a sphere fixed in a uniform stream is calculated to the third order of approximation by means of the Janzen-Rayleigh method. The velocity and the pressure distributions over the surface of the sphere are computed and the terms involving the fourth power of the Mach number, neglected in Rayleigh's calculation, are shown to be of considerable importance as the local velocityof sound is approached on the sphere. The critical Mach number, that is, the value of the Mach number at which the maximum velocity of the fluid past the sphere is just equal to the local velocity of sound, is calculated for both the second and the third approximations.
Download or read book Index of NACA Technical Publications written by United States. National Advisory Committee for Aeronautics and published by . This book was released on 1949 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Knocking Characteristics of Fuels in Relation to Maximum Permissible Performance of Aircraft Engines written by Addison May Rothrock and published by . This book was released on 1940 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Memorandums written by United States. National Advisory Committee for Aeronautics and published by . This book was released on 1940 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chiefly translations from foreign aeronautical journals.
Download or read book Spark Ignition Engine Knock Detection Using In cylinder Optical Probes written by Zhihong Sun and published by . This book was released on 1997 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engine Combustion written by David R Rogers and published by SAE International. This book was released on 2021-06-02 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engine Combustion: Pressure Measurement and Analysis, 2E provides practical information on measuring, analyzing, and qualifying combustion data, as well as details on hardware and software requirements and system components. Describing the principles of a successful combustion measurement process, the book will enable technicians and engineers to efficiently generate the required data to complete their development tasks. The revised edition has been updated with color photos and a fresh modern format has been adapted enhancing the readability of the book. As with the original printing, Engine Combustion: Pressure Measurement and Analysis, 2E is a comprehensive handbook for technicians and engineers involved in engine testing and development, and a valuable reference for scientists and students who wish to understand combustion measurement processes and techniques.
Download or read book Technical Manual written by United States Department of the Army and published by . This book was released on 1973 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Selected Listing of NASA Scientific and Technical Reports for written by and published by . This book was released on 1949 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalogue of the Public Documents of the Congress and of All Departments of the Government of the United States for the Period from to written by United States. Superintendent of Documents and published by . This book was released on with total page 2868 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 1973 74 ASTM Manual for Rating Motor Diesel and Aviation Fuels written by American Society for Testing and Materials and published by . This book was released on 1973 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.
Download or read book SAE Technical Paper Series written by and published by . This book was released on 1961 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Online version: Technical papers portion of the SAE Digital Library references thousands of SAE Technical Papers covering the latest advances and research in all areas of mobility engineering including ground vehicle, aerospace, off-highway, and manufacturing technology. Sample coverage includes fuels and lubricants, emissions, electronics, brakes, restraint systems, noise, engines, materials, lighting, and more. Your SAE service includes detailed summaries, complete documents in PDF, plus document storage and maintenance
