Download or read book Measurement and Prediction of Aerosol Formation for the Safe Utilization of Industrial Fluids written by Kiran Krishna and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Mist or aerosol explosions present a serious hazard to process industries. Heat transfer fluids are widely used in the chemical process industry, are flammable above their flash points, and can cause aerosol explosions. Though the possibility of aerosol explosions has been widely documented, knowledge about their explosive potential is limited. Studying the formation of such aerosols by emulating leaks in process equipment will help define a source term for aerosol dispersions and aid in characterizing their explosion hazards. Analysis of the problem of aerosol explosions reveals three major steps: source term calculations, dispersion modeling, and explosion analysis. The explosion analysis, consisting of ignition and combustion, is largely affected by the droplet size distribution of the dispersed aerosol. The droplet size distribution of the dispersed aerosol is a function of the droplet size distribution of the aerosol formed from the leak. Existing methods of dealing with the problem of aerosol explosions are limited to enhancing the dispersion to prevent flammable concentrations and use of explosion suppression mechanisms. Insufficient data and theory on the flammability limits of aerosols renders such method speculative at best. Preventing the formation of aerosol upon leaking will provide an inherently safer solution to the problem. The research involves the non-intrusive measurement of heat transfer fluid aerosol sprays using a Malvern Diffraction Particle Analyzer. The aerosol is generated by plain orifice atomization to simulate the formation and dispersion of heat transfer fluid aerosols through leaks in process equipment. Predictive correlations relating aerosol droplet sizes to bulk liquid pressures, temperatures, thermal and fluid properties, leak sizes, and ambient conditions are presented. These correlations will be used to predict the conditions under which leaks will result in the formation of aerosols and will ultimately help in estimating the explosion hazards of heat transfer fluid aerosols. Heat transfer fluid selection can be based on liquids that are less likely to form aerosols. Design criteria also can incorporate the data to arrive at operating conditions that are less likely to produce aerosols. The goal is to provide information that will reduce the hazards of aerosol explosions thereby improving safety in process industries.
Download or read book Measurement and Prediction of Aerosol Formation for Thesafe Utilization of Industrial Fuids written by Kiran Krishna and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Mist or aerosol explosions present a serious hazard to process industries. Heat transfer fluids are widely used in the chemical process industry, are flammable above their flash points, and can cause aerosol explosions. Though the possibility of aerosol explosions has been widely documented, knowledge about their explosive potential is limited. Studying the formation of such aerosols by emulating leaks in process equipment will help define a source term for aerosol dispersions and aid in characterizing their explosion hazards. Analysis of the problem of aerosol explosions reveals three major steps: source term calculations, dispersion modeling, and explosion analysis. The explosion analysis, consisting of ignition and combustion, is largely affected by the droplet size distribution of the dispersed aerosol. The droplet size distribution of the dispersed aerosol is a function of the droplet size distribution of the aerosol formed from the leak. Existing methods of dealing with the problem of aerosol explosions are limited to enhancing the dispersion to prevent flammable concentrations and use of explosion suppression mechanisms. Insufficient data and theory on the flammability limits of aerosols renders such method speculative at best. Preventing the formation of aerosol upon leaking will provide an inherently safer solution to the problem. The research involves the non-intrusive measurement of heat transfer fluid aerosol sprays using a Malvern Diffraction Particle Analyzer. The aerosol is generated by plain orifice atomization to simulate the formation and dispersion of heat transfer fluid aerosols through leaks in process equipment. Predictive correlations relating aerosol droplet sizes to bulk liquid pressures, temperatures, thermal and fluid properties, leak sizes, and ambient conditions are presented. These correlations will be used to predict the conditions under which leaks will result in the formation of aerosols and will ultimately help in estimating the explosion hazards of heat transfer fluid aerosols. Heat transfer fluid selection can be based on liquids that are less likely to form aerosols. Design criteria also can incorporate the data to arrive at operating conditions that are less likely to produce aerosols. The goal is to provide information that will reduce the hazards of aerosol explosions thereby improving safety in process industries.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2004 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerosol Measurement written by Pramod Kulkarni and published by John Wiley & Sons. This book was released on 2011-07-12 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerosol Measurement: Principles, Techniques, and Applications Third Edition is the most detailed treatment available of the latest aerosol measurement methods. Drawing on the know-how of numerous expert contributors; it provides a solid grasp of measurement fundamentals and practices a wide variety of aerosol applications. This new edition is updated to address new and developing applications of aerosol measurement, including applications in environmental health, atmospheric science, climate change, air pollution, public health, nanotechnology, particle and powder technology, pharmaceutical research and development, clean room technology (integrated circuit manufacture), and nuclear waste management.
Download or read book Aerosols Handbook written by Lev S. Ruzer and published by CRC Press. This book was released on 2012-08-15 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the rapid growth of the nanotechnology industry, the need to understand the biological effects of aerosol exposure has become increasingly important. Featuring contributions by leading experts in the field, Aerosols Handbook: Measurement, Dosimetry, and Health Effects, Second Edition offers an up-to-date overview of many aspects of aerosols, from properties to health effects and epidemiology. Covering indoor, outdoor, industrial, medical, pharmaceutical, and radioactive aerosols, this book explores aerosol dosimetry by defining terms such as exposure and dose. In addition, it looks at nanometer particles, the mechanism of aerosol deposition in the lungs, and modeling deposition with a corresponding uncertainty in risk assessment. The text also emphasizes the importance of accurate aerosol measurements, particularly breathing zone exposure assessments. Examining radioactive aerosols, the book discusses lessons learned from nuclear accidents, radon and thoron, and long-lived radionuclides in the environment. It brings together research on both radioactive and nonradioactive aerosols, supplying readers with a more complete view of how aerosols behave in the lungs. New in This Edition Five new chapters that address the safety of nanomaterials, dealing with nanoparticle cell penetration, high aspect ratio nanomaterials, nanoaerosols in drug delivery, risk assessment, and health effects New chapters on atmospheric pollution related to climate change, chemical analyses of particle filter deposits, and classical nucleation theory New data on measurement, dosimetry, and health effects Updated throughout, this second edition continues to be an essential resource for those who study exposure, dosages, and toxicity to develop treatments for exposure, reduce air pollution, and establish better safety regulations, particularly in industries using nanotechnologies.
Download or read book Aerosols Handbook written by Lev S. Ruzer and published by CRC Press. This book was released on 2004-12-28 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: As more attention is dedicated to understanding the occupational health risks associated with the industrial manufacture and use of nanotechnology, Aerosols Handbook: Measurement, Dosimetry, and Health Effects is a timely presentation of time-tested research in the field of aerosol science. The book covers a multitude of topics in indoor, outdoor,
Download or read book Aerosol Science for Industrial Hygienists written by J.H. Vincent and published by Elsevier. This book was released on 1995-10-10 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerosols in workplace atmospheres have been - and continue to be - a major focus of industrial hygiene. Although there are many existing texts on aerosol science and on occupational health respectively, this new book sets out to be complementary to these and to provide a link between the two fields. In particular, the central concept of worker exposure leads to a structured approach which draws together wide-ranging aspects of aerosol science within the occupational health framework. Introductory chapters are concerned with the nature and properties of aerosols, and how they are generated in the occupational environment. The book then goes on to provide a description of the fundamental mechanical properties of aerosols, in particular those mechanical properties associated with the motion of airborne particles (which govern particle transport, inhalation, deposition, sampling and control). There follows a description of the optical properties of workplace aerosols since these are important in the visual appearance of aerosols and in many aspects of measurement. The central core of the book deals with the processes which govern the nature of exposure to and the subsequent fate and effects of airborne particles, leading to a rational framework for standards, measurement and control. Finally, a chapter is added which relates what has been said about aerosols to gaseous and vapour contaminants. The book is aimed at graduate students and practitioners in industrial hygiene and other occupational (and environmental) health disciplines.
Download or read book Chemical Engineering Progress written by and published by . This book was released on 2006 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerosols Handbook written by Lev S. Ruzer and published by CRC Press. This book was released on 2004-12-28 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: As more attention is dedicated to understanding the occupational health risks associated with the industrial manufacture and use of nanotechnology, Aerosols Handbook: Measurement, Dosimetry, and Health Effects is a timely presentation of time-tested research in the field of aerosol science. The book covers a multitude of topics in indoor, outdoor, and industrial aerosols, including aerosol measurement, deposition, particle size distribution, and biokinetic processes. Where harmful exposure to ultrafine particles may occur through inhalation, dermal contact, and ingestion, this book discusses how the size, shape, and chemical properties of particles affect aerosol deposition in the lungs, possibly other organs, and the overall toxicity. The book covers all relevant aspects of aerosols, from epidemiology to molecular biology, and emphasizes the importance of accurate aerosol measurement. The authors discuss Chernobyl accident and miners' lungs in detail to illustrate the effects of radioactive aerosols. The final section focuses on the health effects of specific aerosols, such as diesel aerosols and ultrafine particles. By converging research from both radioactive and non-radioactive aerosols, the editors give the book a unique and more complete perspective of how aerosols behave in the lungs. Aerosols Handbook: Measurement, Dosimetry, and Health Effects is an essential resource for those who study exposure, dosages, and toxicity to develop treatments for exposure, reduce air pollution, and establish better safety regulations, particularly in industries using nanotechnologies.
Download or read book The Measurement and Means of Mitigation of Aerosol Formation from Flashing Liquids written by Donald J. Hoffmann and published by . This book was released on 1998 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Study of Formation and Convective Transport of Aerosols Using Optical Diagnostic Technique written by Tae-Kyun Kim and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The characteristics of liquid and solid aerosols have been intensively investigated by means of optical diagnostic techniques. Part I describes the characteristics of liquid aerosol formation formed by heat transfer fluids (HTFs) from bulk liquids. Part II investigates the characteristics of convective transport behavior of solid particles in virtual impactor (VI). The objective of part I is to establish correlations which offer predictions on atomized particle size of HTFs which are widely and commonly used in process industries. There are numerous reports stating that mist explosions formed from leakage cause disastrous accidents in process industries. For safety concerns, the characteristics of mist formation should be known in order to prevent HTFs from catching on fire or exploding. The empirical data on formation of mist are collected by the optical measurement technique, the Fraunhofer diffraction. The Buckingham-PI theorem is applied to establish a correlation between empirical data and representative physical properties of HTFs. Final results of correlations are solved by a statistical method of linear regression. The objective of part II is to investigate the characteristics of convective transport behavior in virtual impactor (VI) which is used to sort polydisperse precursor powder in the process industries of superconductor wire. VI is the device to separate polydisperse particles as a function of particle size by using the difference in inertia between different sizes of particles. To optimize VI performance, the characteristics of convective transport should be identified. This objective is achieved by visualization techniques. The applied visualization techniques are Mie-scattering and laser induced fluorescence (LIF). To investigate analytically, a local Stokes number is introduced in order to offer criteria on predicting the efficiency of VI performance and boundary effect on particle separation. The achieved results can enhance performance and eliminate defects by having knowledge of the behavior of solid particles in VI.
Download or read book Measurement and Prediction of Aerosol Collection by Dust mist Respirators written by Lisa M. Brosseau and published by . This book was released on 1989 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerosol Measurement written by Dale A. Lundgren and published by University Press of Florida. This book was released on 1979 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerosol Measurement written by Aerosol Measurement Workshop Staff and published by . This book was released on with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Butterworth-Heinemann. This book was released on 2012-11-05 with total page 3685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in the process industries is critical for those who work with chemicals and hazardous substances or processes. The field of loss prevention is, and continues to be, of supreme importance to countless companies, municipalities and governments around the world, and Lees’ is a detailed reference to defending against hazards. Recognized as the standard work for chemical and process engineering safety professionals, it provides the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing three volume reference instead. The process safety encyclopedia, trusted worldwide for over 30 years Now available in print and online, to aid searchability and portability Over 3,600 print pages cover the full scope of process safety and loss prevention, compiling theory, practice, standards, legislation, case studies and lessons learned in one resource as opposed to multiple sources
Download or read book The Engineering Index Annual written by and published by . This book was released on 1993 with total page 2264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
