Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Tires and Passenger Vehicle Fuel Economy written by and published by Transportation Research Board. This book was released on 2006 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Surface Characteristics of Roadways written by W. E. Meyer and published by ASTM International. This book was released on 1990 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Market Analysis and Consumer Impacts Source Document The motor vehicle market in the late 1970 s written by and published by . This book was released on 1980 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transport Infrastructure and Systems written by Gianluca Dell'Acqua and published by CRC Press. This book was released on 2017-03-16 with total page 1134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport Infrastructure Asset management in transport infrastructure, financial viability of transport engineering projects/ Life cycle Cost Analysis, Life-Cycle Assessment and Sustainability Assessment of transport infrastructure/ Infrastructures financing and pricing with equity appraisal, operation optimization and energy management/ Low-Volume roads: planning, maintenance, operations, environmental and social issues/ Public-Private Partnership (PPP) experience in transport infrastructure in different countries and economic conditions/ Airport Pavement Management Systems, runway design and maintenance/ Port maintenance and development issues, technology relating to cargo handling, landside access, cruise operations/ Infrastructure Building Information Modelling (I-BIM) / Pavement design and innovative bituminous materials/ Recycling and re-use in road pavements, environmentally sustainable technologies/ Stone pavements, ancient roads and historic railways/ Cementitious stabilization of materials used in the rehabilitation of transportation infrastructure. Transport Systems Sustainable transport and the environment protection including green vehicles/ Urban transport, land use development, spatial and transport planning/ Bicycling, bike, bike-sharing systems, cycling mobility/ Human factor in transport systems/ Intelligent Mobility: emerging technologies to enable the smarter movement of people and goods/Airport landside: access roads, parking facilities, terminal facilities, aircraft apron and the azdjacent taxiway/ Transportation policy, planning and design, modelling and decision making/ Transport economics, finance and pricing issues, optimization problems, equity appraisal/ Road safety impact assessments, road safety audits, the management of road network safety and safety inspections/ Tunnels and underground structures: preventing incidents-accidents mitigating their effects for both people and goods/ Traffic flow characteristics, traffic control devices, work zone traffic control, highway capacity and quality of service/ Track-vehicle interactions in railway systems, capacity analysis of railway networks/ Risk assessment and safety in air and railway transport, reliability aspects/ Maritime transport and inland waterways transport research/ Intermodal freight transport: terminals and logistics.
Download or read book Global Status Report on Road Safety written by and published by . This book was released on 2009 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approximately 1.3 million people die each year on the world's roads, and between 20 and 50 million sustain non-fatal injuries. The Global status report on road safety is the first broad assessment of the road safety situation in 178 countries, using data drawn from a standardized survey. The results show that road traffic injuries remain an important public health problem, particularly for low-income and middle-income countries. Pedestrians, cyclists and motorcyclists make up almost half of those killed on the roads, highlighting the need for these road users to be given more attention in road safety programmes. The results suggest that in many countries road safety laws need to be made more comprehensive while enforcement should be strengthened. The Global status report on road safety results clearly show that significantly more action is needed to make the world's roads safer. [Ed.]
Download or read book Fuel Economy a Bibliography written by Lois Flynn and published by . This book was released on 1977 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vehicle Propulsion Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2007-09-21 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors of this text have written a comprehensive introduction to the modeling and optimization problems encountered when designing new propulsion systems for passenger cars. It is intended for persons interested in the analysis and optimization of vehicle propulsion systems. Its focus is on the control-oriented mathematical description of the physical processes and on the model-based optimization of the system structure and of the supervisory control algorithms.
Download or read book Bearing Capacity of Roads Railways and Airfields written by Andreas Loizos and published by CRC Press. This book was released on 2017-07-20 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bearing Capacity of Roads, Railways and Airfields includes the contributions to the 10th International Conference on the Bearing Capacity of Roads, Railways and Airfields (BCRRA 2017, 28-30 June 2017, Athens, Greece). The papers cover aspects related to materials, laboratory testing, design, construction, maintenance and management systems of transport infrastructure, and focus on roads, railways and airfields. Additional aspects that concern new materials and characterization, alternative rehabilitation techniques, technological advances as well as pavement and railway track substructure sustainability are included. The contributions discuss new concepts and innovative solutions, and are concentrated but not limited on the following topics: · Unbound aggregate materials and soil properties · Bound materials characteritics, mechanical properties and testing · Effect of traffic loading · In-situ measurements techniques and monitoring · Structural evaluation · Pavement serviceability condition · Rehabilitation and maintenance issues · Geophysical assessment · Stabilization and reinforcement · Performance modeling · Environmental challenges · Life cycle assessment and sustainability Bearing Capacity of Roads, Railways and Airfields is essential reading for academics and professionals involved or interested in transport infrastructure systems, in particular roads, railways and airfields.
Download or read book Intelligent Road Design written by M. K. Jha and published by WIT Press. This book was released on 2006 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing the intelligent concepts of the ancient endeavour of road design, this book discusses how a road alignment optimization model can be developed and applied in real case studies. Based on research in intelligent road design and alignment optimization, it is suitable for road planners, designers, senior undergraduate and graduate students.
Download or read book Logan International Airport Proposed Development of Bird Island Flats for Air Cargo Boston written by and published by . This book was released on 1980 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ConocoPhillips FuelEfficient HighPerformance FEHP SAE 75W90 Rear Axle Gear Lubricant written by and published by DIANE Publishing. This book was released on with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pavement Roadway and Bridge Life Cycle Assessment 2020 written by John Harvey and published by CRC Press. This book was released on 2020-07-02 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: An increasing number of agencies, academic institutes, and governmental and industrial bodies are embracing the principles of sustainability in managing their activities. Life Cycle Assessment (LCA) is an approach developed to provide decision support regarding the environmental impact of industrial processes and products. LCA is a field with ongoing research, development and improvement and is being implemented world-wide, particularly in the areas of pavement, roadways and bridges. Pavement, Roadway, and Bridge Life Cycle Assessment 2020 contains the contributions to the International Symposium on Pavement, Roadway, and Bridge Life Cycle Assessment 2020 (Davis, CA, USA, June 3-6, 2020) covering research and practical issues related to pavement, roadway and bridge LCA, including data and tools, asset management, environmental product declarations, procurement, planning, vehicle interaction, and impact of materials, structure, and construction. Pavement, Roadway, and Bridge Life Cycle Assessment 2020 will be of interest to researchers, professionals, and policymakers in academia, industry, and government who are interested in the sustainability of pavements, roadways and bridges.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Interim Report Covering a 17 country Inventory written by International Road Federation and published by . This book was released on 1966 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
