Download or read book Mathematical Structure and Numerical Accuracy of Discontinuous Deformation Analysis written by David M. Doolin and published by . This book was released on 2002 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particulate Discrete Element Modelling written by Catherine O'Sullivan and published by CRC Press. This book was released on 2011-04-06 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first single work on DEM providing the information to get started with this powerful numerical modelling approach. Provides the basic details of the numerical method and the approaches used to interpret the results of DEM simulations. It will be of use to professionals, researchers and higher level students, with a theoretical overview of DEM as well as practical guidance.Selected Contents: 1.Introduction 2.Use of DEM in Geomechanics 3.Calculation of Contact Forces 4.Particle Motion 5.Particle Types 6.Boundary Conditions 7.Initial Geometry and Specimen Generation 8.Time Integration and Discrete Element Modelling 9.DEM Interpretation: A Continuum Perspective 10.Postprocessing: Graphical Interpretation of DEM Simulations 11.Basic Statisti
Download or read book Discontinuous Deformation Analysis in Rock Mechanics Practice written by Yossef H. Hatzor and published by CRC Press. This book was released on 2017-07-20 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical, discrete element, Discontinuous Deformation Analysis (DDA) method was developed by Dr. Gen-hua Shi while he was working at the University of California, Berkeley, under the supervision of Prof. Richard E. Goodman in the late 1980s. Two-dimensional DDA was published in 1993 and three-dimensional DDA in 2001. Since its publication DDA has been verified, validated and applied in numerous studies worldwide and is now considered a powerful and robust method to address both static and dynamic engineering problems in discontinuous rock masses. In this book Yossef H. Hatzor and Guowei Ma, co-chairs of the International Society for Rock Mechanics (ISRM) Commission on DDA, join Dr. Shi in authoring a monograph that presents the state of the art in DDA research. A comprehensive discussion of DDA development since its publication is provided in Chapter 1, followed by concise reviews of 2D and 3D DDA in chapters 2 and 3. Procedures to select geological and numerical input parameters for DDA are discussed in Chapter 4, and DDA validation and verification is presented in Chapter 5. Applications of DDA in underground and rock slope engineering projects are discussed in chapters 6 and 7. In Chapter 8 the novel contact theory recently developed by Dr. Shi is published in its complete form, for the first time. This book is published within the framework of the ISRM Book Series and is the contribution of the ISRM DDA Commission to the international rock mechanics community.
Download or read book Development and Application of Discontinuous Modelling for Rock Engineering written by Ming Lu and published by CRC Press. This book was released on 2021-07-29 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thirty papers published in this book represent the latest developments in Discontinuous Deformation Analysis (DDA). The Numerical Manifold Method (NMM) and other numerical methods and their applications are also covered, as are the theoretical contributions of 3D DDA, modelling and visualization of 3D joint systems, and high-order NMM. Applications of these advances include the stability of underground works, rock slopes and boreholes.
Download or read book The Application of Discrete Element Modelling to Finite Deformation Problems in Geomechanics written by Catherine O'Sullivan and published by . This book was released on 2002 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Algorithms written by Justin Solomon and published by CRC Press. This book was released on 2015-06-24 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Algorithms: Methods for Computer Vision, Machine Learning, and Graphics presents a new approach to numerical analysis for modern computer scientists. Using examples from a broad base of computational tasks, including data processing, computational photography, and animation, the textbook introduces numerical modeling and algorithmic desig
Download or read book Rock Mechanics and Engineering Volume 3 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-04-21 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Modeling & Design is the third volume of the five-volume set Rock Mechanics and Engineering and contains twenty-eight chapters from key experts in the following fields: - Numerical Modeling Methods; - Back Analysis; - Risk Analysis; - Design and Stability Analysis: Overviews; - Design and Stability Analysis: Coupling Process Analysis; - Design and Stability Analysis: Blast Analysis and Design; - Rock Slope Stability Analysis and Design; - Analysis and Design of Tunnels, Caverns and Stopes. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 1996-10-23 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides insight into advanced tool materials, physical theory and research understanding of metal cutting processes. The text highlights technology developed internationally, and reviews available technology of metal cutting processes, such as turning, boring, milling and drilling. It also elucidates optimum choices for tool material and cutting conditions, and more.
Download or read book Parallel Programming in OpenMP written by Rohit Chandra and published by Morgan Kaufmann. This book was released on 2001 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software -- Programming Techniques.
Download or read book Continuous and Discontinuous Modelling of Cohesive Frictional Materials written by P.A. Vermeer and published by Springer. This book was released on 2008-01-11 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: A knowledge of the mechanical behaviour of both naturally occurring materials, such as soils and rocks, and artificial materials such as concrete and industrial granular matter, is of fundamental importance to their proper use in engineering and scientific applications. This volume contains selected lectures by international experts on current developments and problems in the numerical modelling of cohesive-frictional materials which provide a deeper understanding of the microscopic and macroscopic description of such materials. This book fills a gap by emphasizing the cross-fertilization of ideas between engineers and scientists engaged in this exciting field of research.
Download or read book Advances in Mathematical Modeling and Experimental Methods for Materials and Structures written by Rivka Gilat and published by Springer Science & Business Media. This book was released on 2009-12-18 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of cutting-edge papers, written by leading authors in honor of Professor Jacob Aboudi, covers a wide spectrum of topics in the field, presents both theoretical and experimental approaches, and suggests directions for possible future research.
Download or read book Numerical Methods and Advanced Simulation in Biomechanics and Biological Processes written by Miguel Cerrolaza and published by Academic Press. This book was released on 2017-12-28 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods and Advanced Simulation in Biomechanics and Biological Processes covers new and exciting modeling methods to help bioengineers tackle problems for which the Finite Element Method is not appropriate. The book covers a wide range of important subjects in the field of numerical methods applied to biomechanics, including bone biomechanics, tissue and cell mechanics, 3D printing, computer assisted surgery and fluid dynamics. Modeling strategies, technology and approaches are continuously evolving as the knowledge of biological processes increases. Both theory and applications are covered, making this an ideal book for researchers, students and R&D professionals. - Provides non-conventional analysis methods for modeling - Covers the Discrete Element Method (DEM), Particle Methods (PM), MessLess and MeshFree Methods (MLMF), Agent-Based Methods (ABM), Lattice-Boltzmann Methods (LBM) and Boundary Integral Methods (BIM) - Includes contributions from several world renowned experts in their fields - Compares pros and cons of each method to help you decide which method is most applicable to solving specific problems
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1972 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interaction between human activities and geo environment for sustainable development written by Xuanmei Fan and published by Frontiers Media SA. This book was released on 2023-03-02 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microscopic structure effect on the macroscopic property of geomaterials written by Qingxiang Meng and published by Frontiers Media SA. This book was released on 2023-03-17 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1980 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Combined Finite Discrete Element Method written by Antonio A. Munjiza and published by John Wiley & Sons. This book was released on 2004-04-21 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combined finite discrete element method is a relatively new computational tool aimed at problems involving static and / or dynamic behaviour of systems involving a large number of solid deformable bodies. Such problems include fragmentation using explosives (e.g rock blasting), impacts, demolition (collapsing buildings), blast loads, digging and loading processes, and powder technology. The combined finite-discrete element method - a natural extension of both discrete and finite element methods - allows researchers to model problems involving the deformability of either one solid body, a large number of bodies, or a solid body which fragments (e.g. in rock blasting applications a more or less intact rock mass is transformed into a pile of solid rock fragments of different sizes, which interact with each other). The topic is gaining in importance, and is at the forefront of some of the current efforts in computational modeling of the failure of solids. * Accompanying source codes plus input and output files available on the Internet * Important applications such as mining engineering, rock blasting and petroleum engineering * Includes practical examples of applications areas Essential reading for postgraduates, researchers and software engineers working in mechanical engineering.
