Download or read book Mathematical Modeling of the Blast Furnace Process written by Andrey Dmitriev and published by Cambridge Scholars Publishing. This book was released on 2019-10-23 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the results of extensive research on the mathematical modelling of the blast furnace process. It describes the mathematical models utilised, providing insights into two-dimensional models of gas dynamics, heat transfer and reduction, the cohesion zone, and the balance equilibrium model. On the basis of these models, it details a method for the analytical study of the blast-furnace process, which essentially complements the experimental methods used in practice. Examples of the solution of practical problems of blast furnace smelting are also provided, and the mathematical models highlighted here can be used in research and design institutes, at metallurgical enterprises and for higher education institutions in the training of students in metallurgical specialties.
Download or read book Mathematical Modeling of the Blast Furnace Process written by Andrey Dmitriev and published by Cambridge Scholars Publishing. This book was released on 2019-12 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the results of extensive research on the mathematical modelling of the blast furnace process. It describes the mathematical models utilised, providing insights into two-dimensional models of gas dynamics, heat transfer and reduction, the cohesion zone, and the balance equilibrium model. On the basis of these models, it details a method for the analytical study of the blast-furnace process, which essentially complements the experimental methods used in practice. Examples of the solution of practical problems of blast furnace smelting are also provided, and the mathematical models highlighted here can be used in research and design institutes, at metallurgical enterprises and for higher education institutions in the training of students in metallurgical specialties.
Download or read book The Blast Furnace Mathematical Modelling written by Gurprit SINGH and published by . This book was released on 2021-03-21 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Blast Furnace is a reactor which is charged continuously and tapped intermittently. But the way technology has improved, bigger and the most modern furnaces are almost tapping continuously. The largest furnaces can tap even 10,000 tonnes of hot metal every day. Tthe solids like coke, sinter, lump ore, pellets, limestone, quartzite and sometimes even BOF slag and Manganese ore are charged into the furnace from the top using a double bell system in the old furnaces and by bell-less charging in all the modern furnaces. As the Raw materials descend from top to bottom, these come into contact with the ascending hot gases from the tuyere zone upwards, as the coke burns in the raceway in a blast furnace. Thus, the heat is transferred from hot gases to the colder raw materials and these get heated up. The volume of the raw materials expands with increasing temperature and the increase in the diameter of Blast furnace proves useful to accommodate this expansion. Once the materials are sufficiently heated up and the Carbon Monoxide and Carbon reduces the iron ore, the charge starts to fuse and form metal and slag and now it contracts in volume. Thus, the diameter of furnace needs to be reduced accordingly.The waste gases are collected at the top and liquids like slag and molten iron at the bottom. The section is reduced at the top since the collection of gases in a vast area is difficult. The strength and quality of the available coke determines the effective height of the furnace.The BF height depends normally on the strength of the coke available in India. After all, the column of charge material is so heavy and it should not pulverise the coke else the permeability or the passing of gases through the descending column would come to a halt. So, normally any increase in the effective volume is achieved through the increase in the cross section of the furnace keeping the furnace height practically the same. Of course, once design phase is over, one cannot change a furnace's dimensions without a complete blow-out.In this book, before detailing the mathematical modelling a few basics of chemistry and metallurgy have been introduced. The fundamentals of Chemistry and Thermodynamics are first covered. There is a need to know about Physical Metallurgy including the very well-known Iron-Carbon Equilibrium process. Next we learn about the Physico-Chemical and the thermal Principles of Blast Furnace Metallurgy. Chapter 4 is the most relevant one and the whole book revolves around it. It is named the Blast Furnace Calculations. After that Mathematical Models have been discussed. Here the emphasis has been given upon the Models as supplied by Rautaruukki OY, Finland to various Steel Plants in India. In another Chapter the RIST Model and C-DRR diagram are specially touched upon.The Blast furnace is a dynamic process and use of computers is a pre-requisite for analysing the Blast Furnace process in real-time. This has also been discussed. Lastly, we discuss about the latest Developments in Blast Furnace Technology, in general.Students studying B. Tech and higher levels may find this book interesting since this book is not written in a very traditional way. It has been the endeavour of Author to keep things simple and understandable. Working engineers may also find it useful.
Download or read book Blast Furnace Simulation written by Craig Emerson and published by . This book was released on 2009-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blast Furnace Simulation written by CSA Journal Division and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blast Furnace Phenomena and Modelling written by The Iron and Steel Institute of Japan and published by Springer. This book was released on 1987-07-31 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: As ironmakers are well aware, it was only a few decades ago that the blast furnace was viewed as a strange 'black box'. Recently, however, various in-furnace phenomena have become the subject of serious scientific study, largely as the result of the 'dissection' of dead furnaces, together with the development of advanced monitoring and control techniques. In this way, a new frontier has been opened within the venerable domain of metallurgy. In the light of these new developments, the Committee on Reaction within Blast Furnaces was set up in March 1977 by the Joint Society ofIron and Steel Basic Research - a cooperative research organization of the Iron and Steel Institute of Japan (ISIJ), the Japan Institute of Metals (JIM) and the Japan Society for the Promotion of Science (JSPS). Consisting of twenty-six members and advisors drawn from the fields of academia and industry, this committee collected, discussed, and evaluated numerous papers during its five year commission. Particular attention was paid to the interpretation of findings drawn from the autopsy of dead furnaces, in the context of the live furnace state, and the correlation of data regarding cohesive zone configuration, level, and furnace performance. The results of this intense research activity are presented here in the hope that they will serve not only as a source of enrichment to the professional knowledge of researchers and operators, but also as textual material for graduate students in the field of metallurgy.
Download or read book International Conference on Advances in the Theory of Ironmaking and Steelmaking ATIS 2009 December 09 11 2009 written by Govind S. Gupta and published by Allied Publishers. This book was released on 2009 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed articles presented in the International Conference on Advances in the Theory of Ironmaking and Steelmaking; organized by the Dept. of Material Engineering, IISc., Bangalore.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1982 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blast Furnace Simulation Mathematical Models 2005 ED written by and published by Search-In-Print. This book was released on 2004-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiled by the Editors of Materials Information. This updated report provides a timely guide to scientific literature published worldwide. Its subject coverage focuses on process optimization through computer modeling of heat flux, fuel consumption, and material distribution. Each report consists of up to 350 abstracts and citations, summarizing the contents of relevant journals, conference proceedings, patents, and reports.
Download or read book Some Topics in Industrial and Applied Mathematics written by Ta-tsien Li and published by World Scientific. This book was released on 2007 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Shanghai Forum on Industrial and Applied Mathematics was organized in May 2006 on the occasion that many famous industrial and applied mathematicians gathered in Shanghai from different countries to participate in the Officers'' Meeting and the Board Meeting of the ICIAM (International Council for Industrial and Applied Mathematics). This volume collects the material covered by the majority of the lectures of which reflects panoramically recent results and trends in industrial and applied mathematics. This book will be very useful for graduate students and researchers in industrial and applied mathematics.
Download or read book Process Modeling in Pyrometallurgical Engineering written by Henrik Saxén and published by MDPI. This book was released on 2021-09-01 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue presents almost 40 papers on recent research in modeling of pyrometallurgical systems, including physical models, first-principles models, detailed CFD and DEM models as well as statistical models or models based on machine learning. The models cover the whole production chain from raw materials processing through the reduction and conversion unit processes to ladle treatment, casting, and rolling. The papers illustrate how models can be used for shedding light on complex and inaccessible processes characterized by high temperatures and hostile environment, in order to improve process performance, product quality, or yield and to reduce the requirements of virgin raw materials and to suppress harmful emissions.
Download or read book Blast Furnace Simulation written by Technology Research Editors and published by Search-In-Print. This book was released on 2007-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blast Furnace Simulation written by Technology Research Editors and published by Search-In-Print. This book was released on 2006-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Systems Computing Sciences and Software Engineering written by Tarek Sobh and published by Springer Science & Business Media. This book was released on 2007-09-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Systems, Computing Sciences and Software Engineering This book includes the proceedings of the International Conference on Systems, Computing Sciences and Software Engineering (SCSS’05). The proceedings are a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of computer science, software engineering, computer engineering, systems sciences and engineering, information technology, parallel and distributed computing and web-based programming. SCSS’05 was part of the International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering (CISSE’05) (www. cisse2005. org), the World’s first Engineering/Computing and Systems Research E-Conference. CISSE’05 was the first high-caliber Research Conference in the world to be completely conducted online in real-time via the internet. CISSE’05 received 255 research paper submissions and the final program included 140 accepted papers, from more than 45 countries. The concept and format of CISSE’05 were very exciting and ground-breaking. The PowerPoint presentations, final paper manuscripts and time schedule for live presentations over the web had been available for 3 weeks prior to the start of the conference for all registrants, so they could choose the presentations they want to attend and think about questions that they might want to ask. The live audio presentations were also recorded and were part of the permanent CISSE archive, which also included all power point presentations and papers. SCSS’05 provided a virtual forum for presentation and discussion of the state-of the-art research on Systems, Computing Sciences and Software Engineering.
Download or read book Mathematical Modeling of Accessory Element Distribution in Metallurgical Processes written by Michael A. Lucas and published by . This book was released on 1983 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Pulverized Coal Injection Technology and Blast Furnace Operation written by K. Ishii and published by Elsevier. This book was released on 2000-11-10 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to reduce the cost of running blast furnaces (BFs), injected pulverized coal is used rather than coke to fire BFs. As a result of this, unburned fine materials are blown with the gas into the bosh and dead man areas with possible detrimental effects on gas flow and permeability of the coke column. The capacity of the furnace to consume these particles by solution loss is probably one of the limitations to coal injection. It is, therefore, important to understand the physicochemical and aerodynamic behaviour of fines including the change of in-furnace phenomena. The Committee of Pulverized Coal Combustion and In-Furnace Reaction in BF was set up in 1993 as a cooperative research of the Japan Society for the Promotion of Science (JSPS) and the Iron and Steel Institute (ISIJ) to evaluate research initiative into this problem. This book reports on the JSPS/ISIJ Committee's activities and describes the interpretation of findings drawn from combustion experiments and the results of live furnace applications, and furnace performance.
Download or read book Mathematical Models in Metallurgical Process Development written by Iron and Steel Institute and published by . This book was released on 1970 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
