Download or read book Mathematical Modeling of Disperse Two Phase Flows written by Christophe Morel and published by Springer. This book was released on 2015-07-17 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops the theoretical foundations of disperse two-phase flows, which are characterized by the existence of bubbles, droplets or solid particles finely dispersed in a carrier fluid, which can be a liquid or a gas. Chapters clarify many difficult subjects, including modeling of the interfacial area concentration. Basic knowledge of the subjects treated in this book is essential to practitioners of Computational Fluid Dynamics for two-phase flows in a variety of industrial and environmental settings. The author provides a complete derivation of the basic equations, followed by more advanced subjects like turbulence equations for the two phases (continuous and disperse) and multi-size particulate flow modeling. As well as theoretical material, readers will discover chapters concerned with closure relations and numerical issues. Many physical models are presented, covering key subjects including heat and mass transfers between phases, interfacial forces and fluid particles coalescence and breakup, amongst others. This book is highly suitable for students in the subject area, but may also be a useful reference text for more advanced scientists and engineers.
Download or read book Two Phase Flow written by Cl Kleinstreuer and published by Routledge. This book was released on 2017-11-01 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate text provides a unified treatment of the fundamental principles of two-phase flow and shows how to apply the principles to a variety of homogeneous mixture as well as separated liquid-liquid, gas-solid, liquid-solid, and gas-liquid flow problems, which may be steady or transient, laminar or turbulent.Each chapter contains several sample problems, which illustrate the outlined theory and provide approaches to find simplified analytic descriptions of complex two-phase flow phenomena.This well-balanced introductory text will be suitable for advanced seniors and graduate students in mechanical, chemical, biomedical, nuclear, environmental and aerospace engineering, as well as in applied mathematics and the physical sciences. It will be a valuable reference for practicing engineers and scientists. A solutions manual is available to qualified instructors.
Download or read book Numerical Methods for Two phase Incompressible Flows written by Sven Gross and published by Springer Science & Business Media. This book was released on 2011-04-26 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first monograph providing an introduction to and an overview of numerical methods for the simulation of two-phase incompressible flows. The Navier-Stokes equations describing the fluid dynamics are examined in combination with models for mass and surfactant transport. The book pursues a comprehensive approach: important modeling issues are treated, appropriate weak formulations are derived, level set and finite element discretization techniques are analyzed, efficient iterative solvers are investigated, implementational aspects are considered and the results of numerical experiments are presented. The book is aimed at M Sc and PhD students and other researchers in the fields of Numerical Analysis and Computational Engineering Science interested in the numerical treatment of two-phase incompressible flows.
Download or read book The Mathematical Modeling of Flow Regime Transition in Bubbly Two phase Flows written by Susana Kalkach-Navarro and published by . This book was released on 1992 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling and Experimentation in Two Phase Flow written by Volfango Bertola and published by CISM International Centre for Mechanical Sciences. This book was released on 2003 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an up-to-date review of recent advances in the study of two-phase flows, with focus on gas-liquid flows, liquid-liquid flows, and particle transport in turbulent flows. The book is divided into several chapters, which after introducing basic concepts lead the reader through a more complex treatment of the subjects. The reader will find an extensive review of both the older and the more recent literature, with abundance of formulas, correlations, graphs and tables. A comprehensive (though non exhaustive) list of bibliographic references is provided at the end of each chapter. The volume is especially indicated for researchers who would like to carry out experimental, theoretical or computational work on two-phase flows, as well as for professionals who wish to learn more about this topic.
Download or read book Mechanistic Modeling of Gas liquid Two phase Flow in Pipes written by Ovadia Shoham and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of this book are twofold: to provide insight and understanding of two-phase flow phenomena and to develop analytical tools for either designing two-phase flow systems or conducting research in this area. The traditional approach for two-phase flow prediction was based on the development of an empirical correlation from experimental data. This book presents the recent approach, in which mathematical mechanistic models are developed, based on the physical phenomena, to predict two-phase flow behavior. The models can be verified and refined with limited experimental data. However, as these models incorporate the physical phenomena and the important flow variables, they can be extended to different operational conditions and can enable scaleup with significant confidence.
Download or read book Computational Methods for Two Phase Flow and Particle Transport written by Wen Ho Lee and published by World Scientific Publishing Company. This book was released on 2013-03-22 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes mathematical formulations and computational methods for solving two-phase flow problems with a computer code that calculates thermal hydraulic problems related to light water and fast breeder reactors. The physical model also handles the particle and gas flow problems that arise from coal gasification and fluidized beds. The second part of this book deals with the computational methods for particle transport.
Download or read book Two Phase Flows and Waves written by Daniel D. Joseph and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IMA Volume in Mathematics and its Applications TWO PHASE FLOWS AND WAVES is based on the proceedings of a workshop which was an integral part of the 1988-89 IMA program on NONLINEAR WAVES. The workshop focussed on the development of waves in flowing composites. We thank the Coordinating Commit tee: James Glimm, Daniel Joseph, Barbara Keyfitz, Andrew Majda, Alan Newell, Peter Olver, David Sattinger and David Schaeffer for planning and implementing the stimulating year-long program. We especially thank the Workshop Organizers, Daniel D. Joseph and David G. Schaeffer for their efforts in bringing together many of the major figures in those research fields in which modelling of granular flows and suspensions is used. Avner Friedman Willard Miller, Jr. PREFACE This Workshop, held from January 3-10,1989 at IMA, focused on the properties of materials which consist of many small solid particles or grains. Let us distinguish the terms granular material and suspension. In the former, the material consists exclusively of solid particles interacting through direct contact with one another, either sustained frictional contacts in the case of slow shearing or collisions in the case of rapid shearing. In suspensions, also called two phase flow, the grains interact with one another primarily through the influence of a viscous fluid which occupies the interstitial space and participates in the flow. (As shown by the lecture of I. Vardoulakis (not included in this volume), the distinction between these two idealized cases is not always clear.
Download or read book Two Phase Flow written by Cl Kleinstreuer and published by CRC Press. This book was released on 2003-05-23 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate text provides a unified treatment of the fundamental principles of two-phase flow and shows how to apply the principles to a variety of homogeneous mixture as well as separated liquid-liquid, gas-solid, liquid-solid, and gas-liquid flow problems, which may be steady or transient, laminar or turbulent. Each chapter contains several sample problems, which illustrate the outlined theory and provide approaches to find simplified analytic descriptions of complex two-phase flow phenomena. This well-balanced introductory text will be suitable for advanced seniors and graduate students in mechanical, chemical, biomedical, nuclear, environmental and aerospace engineering, as well as in applied mathematics and the physical sciences. It will be a valuable reference for practicing engineers and scientists. A solutions manual is available to qualified instructors.
Download or read book Two Fluid Model Stability Simulation and Chaos written by Martín López de Bertodano and published by Springer. This book was released on 2016-11-09 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the linear and nonlinear two-phase stability of the one-dimensional Two-Fluid Model (TFM) material waves and the numerical methods used to solve it. The TFM fluid dynamic stability is a problem that remains open since its inception more than forty years ago. The difficulty is formidable because it involves the combined challenges of two-phase topological structure and turbulence, both nonlinear phenomena. The one dimensional approach permits the separation of the former from the latter.The authors first analyze the kinematic and Kelvin-Helmholtz instabilities with the simplified one-dimensional Fixed-Flux Model (FFM). They then analyze the density wave instability with the well-known Drift-Flux Model. They demonstrate that the Fixed-Flux and Drift-Flux assumptions are two complementary TFM simplifications that address two-phase local and global linear instabilities separately. Furthermore, they demonstrate with a well-posed FFM and a DFM two cases of nonlinear two-phase behavior that are chaotic and Lyapunov stable. On the practical side, they also assess the regularization of an ill-posed one-dimensional TFM industrial code. Furthermore, the one-dimensional stability analyses are applied to obtain well-posed CFD TFMs that are either stable (RANS) or Lyapunov stable (URANS), with the focus on numerical convergence.
Download or read book Computational Methods for Multiphase Flows in Porous Media written by Zhangxin Chen and published by SIAM. This book was released on 2006-04-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a fundamental and practical introduction to the use of computational methods. A thorough discussion of practical aspects of the subject is presented in a consistent manner, and the level of treatment is rigorous without being unnecessarily abstract. Each chapter ends with bibliographic information and exercises.
Download or read book Multiphase reacting flows modelling and simulation written by Daniele L. Marchisio and published by Springer Science & Business Media. This book was released on 2007-10-16 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the most widely applicable modeling approaches. Chapters are organized in six groups covering from fundamentals to relevant applications. The book covers particle-based methods and also discusses Eulerian-Eulerian and Eulerian-Lagrangian techniques based on finite-volume schemes. Moreover, the possibility of modeling the poly-dispersity of the secondary phases in Eulerian-Eulerian schemes by solving the population balance equation is discussed.
Download or read book Mathematical Modeling in Combustion and Related Topics written by Claude-Michel Brauner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains invited lectures and contributed papers presented at the NATO Advanced Research Workshop on Mathematical Modeling in Combustion and related topics, held in. Lyon (France), April 27 - 30, 1987. This conference was planned to fit in with the two-month visit of Professor G.S.S. Ludford to the Ecole Centrale de Lyon. He kindly agreed to chair the Scientific and Organizing Committee and actively helped to initiate the meeting. His death in December 1986 is an enormous loss to the scientific community in general, and in particular, to the people involved in the present enterprise. The subject of mathematical modeling in combustion is too large for a single conference, and the selection of topics re flects both areas of recent research activity and areas of in terest to Professor G.S.S. Ludford, to whose memory the Advanced Workshop and this present volume are dedicated. The meeting was divided into seven specialized sessions detonation theory, mathematical analysis, numerical treatment of combustion problems, flame theory, experimental and industrial aspects, complex chemistry, and turbulent combustion. It brought together researchers and engineers from University and Industry (see below the closing remarks of the workshop by Prof. N. Peters). The articles in this volume have been judged and accepted on their scientific quality, and language corrections may have been sacrificed in order to allow quick dissemination of knowledge to prevail.
Download or read book Advanced Manufacturing Processes written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2020-03-27 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provided by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.
Download or read book Computational Methods in Multiphase Flow IV written by A.A. Mammoli and published by WIT Press. This book was released on 2007-05-11 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Dynamics is one of the most important topics of applied mathematics and physics. Together with complex flows and turbulence, multiphase flows remains one of the most challenging areas of computational mechanics, and even seemingly simple problems remain unsolved to date. Multiphase flows are found in all areas of technology, at all length scales and flow regimes. The fluids involved can be compressible or incompressible, linear or nonlinear. Because of the complexity of the problem, it is often essential to utilize advanced computational and experimental methods to solve the complex equations that describe them. Challenges in these simulations include nonlinear fluids, treating drop breakup and coalescence, characterizing phase structures, and many others.This volume brings together work presented at the Fourth International Conference on Computational and Experimental Methods in Multiphase and Complex Flows. Featured topics include: Suspensions; Bubble and Drop Dynamics; Flow in Porous Media; Interfaces; Turbulent Flow; Injectors and Nozzles; Particle Image Velocimetry; Macroscale Constitutive Models; Large Eddy Simulation; Finite Volumes; Interface Tracking Methods; Biological Flows; Environmental Multiphase Flow; Phase Changes and Stochastic Modelling.
Download or read book Multiphase Flows with Droplets and Particles Second Edition written by Clayton T. Crowe and published by CRC Press. This book was released on 2011-08-26 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition of Multiphase Flow with Droplets and Particles, there have been significant advances in science and engineering applications of multiphase fluid flow. Maintaining the pedagogical approach that made the first edition so popular, this second edition provides a background in this important area of fluid mechanics to those new to the field and a resource to those actively involved in the design and development of multiphase systems. See what’s new in the Second Edition: Chapter on the latest developments in carrier-phase turbulence Extended chapter on numerical modeling that includes new formulations for turbulence and Reynolds stress models Review of the fundamental equations and the validity of the traditional "two-fluid" approach Expanded exercises and a solutions manual A quick look at the table of contents supplies a snapshot of the breadth and depth of coverage found in this completely revised and updated text. Suitable for a first-year graduate (5th year) course as well as a reference for engineers and scientists, the book is clearly written and provides an essential presentation of key topics in the study of gas-particle and gas-droplet flows.
Download or read book One Dimensional Two Phase Flow written by Graham B. Wallis and published by Courier Dover Publications. This book was released on 2020-12-16 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first elementary, general text on two-phase flow suitable for graduate students in engineering, this widely used monograph has been newly updated by author Graham B. Wallis. The two-part treatment focuses on analytical techniques and practical applications. Praised by the Journal of Fluid Mechanics for its "most useful compilation of experimental results," the text features much of the author's own work.
