Download or read book Mathematical Modeling for Gas lift Reactors written by Kanokwan Ngaosuwan and published by . This book was released on 2001 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical Model of Pig iron Refining in Circulating Gas lift Reactor written by A.N Zborshchik and published by . This book was released on 1988 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Young Researchers 2004 written by Tom Dupuis and published by IWA Publishing. This book was released on 2004-04-30 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection of papers in this special issue of WEMS illustrates the various aspects of water and wastewater treatment and management. These papers were presented at the 2nd Young Researchers Conference held on 23-24 April 2004, at the University of Wageningen, The Netherlands. It was organised on behalf of the International Water Association (IWA) and supported by the European Symposium of Environmental Biotechnology (ESEB 2000). The IWA Young Researcher Conferences' mission is to provide young researchers in water and wastewater science, technology and management with a forum to discuss current and future environmental concerns. The conferences aim to confront environmental researchers with technologists and regulatory instances dealing with environmental quality. Moreover, the IWA Young Researchers Conferences address issues related to the development of careers in the water sector.
Download or read book Advanced Reactor Modeling with MATLAB written by Riccardo Tesser and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-12-07 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers the reader a modern approach to reactor description and modelling. Using the widely applied numerical language MATLAB, it provides the reader with categorized groups of general code for a wide variety of chemical reactors. Being designed as a tool for researchers and professionals, the code can easily be extended and adapted by the reader to their own specific problems.
Download or read book Mathematical Modeling of Gas solid Fluidized Bed Reactors written by W. Bluemel and published by . This book was released on 1988 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Simulation of Multiphase Reactors with Continuous Liquid Phase written by Chao Yang and published by Academic Press. This book was released on 2014-09-04 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation of multiphase reactors with continuous liquid phase provides current research and findings in multiphase problems, which will assist researchers and engineers to advance this field. This is an ideal reference book for readers who are interested in design and scale-up of multiphase reactors and crystallizers, and using mathematical model and numerical simulation as tools. Yang and Mao's book focuses on modeling and numerical applications directly in the chemical, petrochemical, and hydrometallurgical industries, rather than theories of multiphase flow. The content will help you to solve reacting flow problems and/or system design/optimization problems. The fundamentals and principles of flow and mass transfer in multiphase reactors with continuous liquid phase are covered, which will aid the reader's understanding of multiphase reaction engineering. - Provides practical applications for using multiphase stirred tanks, reactors, and microreactors, with detailed explanation of investigation methods - Presents the most recent research efforts in this highly active field on multiphase reactors and crystallizers - Covers mathematical models, numerical methods and experimental techniques for multiphase flow and mass transfer in reactors and crystallizers
Download or read book Chemical Reactor Modeling written by Hugo A. Jakobsen and published by Springer Science & Business Media. This book was released on 2008-10-15 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book closes the gap between Chemical Reaction Engineering and Fluid Mechanics. It provides the basic theory for momentum, heat and mass transfer in reactive systems. Numerical methods for solving the resulting equations as well as the interplay between physical and numerical modes are discussed. The book is written using the standard terminology of this community. It is intended for researchers and engineers who want to develop their own codes, or who are interested in a deeper insight into commercial CFD codes in order to derive consistent extensions and to overcome "black box" practice. It can also serve as a textbook and reference book.
Download or read book Mathematical Modeling of Jet Bubbling Reactor written by Fred Jyh-Woei Cheng and published by . This book was released on 1981 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: A jet bubbling reactor for flue gas desulfurization is described by a mathematical model with the concept of two-stages mass transfer with chemical reactions. The Model consists of two coupling differential equations which are solved simultaneously. The result from the theoretical model is agreeable SO2 removal data obtained from a pilot plant reactor.
Download or read book Mathematical Modelling and Computer Simulation of Activated Sludge Systems written by Jacek Makinia and published by IWA Publishing. This book was released on 2020-03-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling and Computer Simulation of Activated Sludge Systems – Second Edition provides, from the process engineering perspective, a comprehensive and up-to-date overview regarding various aspects of the mechanistic (“white box”) modelling and simulation of advanced activated sludge systems performing biological nutrient removal. In the new edition of the book, a special focus is given to nitrogen removal and the latest developments in modelling the innovative nitrogen removal processes. Furthermore, a new section on micropollutant removal has been added. The focus of modelling has been shifting in the last years to models that can describe the performance of a whole plant (plant-wide modelling). The expanded part of this new edition introduces models describing the most important processes interrelated with the mainstream activated sludge systems as well as models describing the energy balance, operating costs and environmental impact. The complex process evaluation, including minimization of energy consumption and carbon footprint, is in line with the present and future wastewater treatment goals. By combining a general introduction and a textbook, this book serves both intermediate and more experienced model users, both researchers and practitioners, as a comprehensive guide to modelling and simulation studies. The book can be used as a supplemental material at graduate and post-graduate levels of wastewater engineering/modelling courses.
Download or read book Mathematical Modeling of Fluid Flow and Mixing in Metallurgical Reactors with Bottom Gas Injections written by Liping Li and published by . This book was released on 1996 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Flow Modeling for Chemical Reactor Engineering written by Vivek V. Ranade and published by Academic Press. This book was released on 2002 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book relates the individual aspects of chemical reactor engineering and computational flow modeling in a coherent way to explain the potential of computational flow modeling for reactor engineering research and practice.
Download or read book Modeling of Gas lift Reactors written by Marco Antonio Márquez and published by . This book was released on 1998 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical Modeling of Food Processing written by Mohammed M. Farid and published by CRC Press. This book was released on 2010-05-21 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by international experts from industry, research centers, and academia, Mathematical Modeling of Food Processing discusses the physical and mathematical analysis of transport phenomena associated with food processing. The models presented describe many of the important physical and biological transformations that occur in food during proces
Download or read book Optimization of Biological Sulphate Reduction to Treat Inorganic Wastewaters written by Joana Cassidy and published by CRC Press. This book was released on 2020-04-27 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work investigated two different approaches to optimize biological sulphate reduction in order to develop a process control strategy to optimize the input of an electron donor and to study how to increase the feasibility of using a cheap carbon source. Feast/famine regimes, applied to design the control strategy, were shown to induce the accumulation of storage compounds in the sulphate reducing biomass. This study showed that delays in the response time and a high control gain can be considered as the most critical factors affecting a sulphide control strategy in bioreactors. The delays are caused by the induction of different metabolic pathways in the anaerobic sludge, including the accumulation of storage products. On this basis, a mathematical model was developed and validated. This can be used to develop optimal control strategies. In order to understand the microbial pathways in the anaerobic oxidation of methane coupled to sulphate reduction (AOM-SR), diverse potential electron donors and acceptors were added to in vitro incubations of an AOM-SR enrichment at high pressure. Acetate was formed in the control group, probably resulting from the reduction of CO2. These results support the hypothesis that acetate may serve as an intermediate in the AOM-SR process.
Download or read book Mathematical Modeling and Digital Simulation of a Commercial Scale High Temperature Gas cooled Reactor HTGR Steam Power Plant written by Asok Ray and published by . This book was released on 1976 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Modelling written by Alisson Brito and published by BoD – Books on Demand. This book was released on 2010-01-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: When talking about modelling it is natural to talk about simulation. Simulation is the imitation of the operation of a real-world process or systems over time. The objective is to generate a history of the model and the observation of that history helps us understand how the real-world system works, not necessarily involving the real-world into this process. A system (or process) model takes the form of a set of assumptions concerning its operation. In a model mathematical and logical assumptions are considered, and entities and their relationship are delimited. The objective of a model – and its respective simulation – is to answer a vast number of “what-if” questions. Some questions answered in this book are: What if the power distribution system does not work as expected? What if the produced ships were not able to transport all the demanded containers through the Yangtze River in China? And, what if an installed wind farm does not produce the expected amount of energyt? Answering these questions without a dynamic simulation model could be extremely expensive or even impossible in some cases and this book aims to present possible solutions to these problems.
Download or read book Mathematical Modeling in Gas liquid Systems written by H. Assadipour and published by . This book was released on 1980 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
