Download or read book Mathematical and Physical Simulation of the Properties of Hot Rolled Products written by Maciej Pietrzyk and published by Elsevier. This book was released on 1999-07-05 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this publication is to comprehensively discuss the possibilities of producing steels with pre-determined attributes, demanded by the customer to fit exacting specifications. The information presented in the book has been designed to indicate the reasons for the expenses and to aid in the process of overcoming the difficulties and reducing the costs. In nine detailed chapters, the authors cover topics including: • steel as a major contributor to the economic wealth of a country in terms of its capabilities and production • current concerns of major steel producers • phenomena contributing to the quality of the product • information concerning the boundary conditions of the rolling process and initial conditions, put to use by mathematical models • the solid state incremental approach and flow formulation • parameters and variables - most of which make use of the exponential nature of phenomena that are activated by thermal energy • the application of three dimensional analysis to shape rolling • the evaluation of parameters by a form of inverse analysis to the flat rolling process • knowledge based modeling, using artificial intelligence, expert systems and neural networks They conclude that when either mathematical or physical modeling of the rolling process is considered and the aim is to satisfy the demands for customers, it is possible to produce what the customer wants, exactly.

Download or read book Microstructure Evolution in Metal Forming Processes written by J Lin and published by Elsevier. This book was released on 2012-07-09 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monitoring and control of microstructure evolution in metal processing is essential in developing the right properties in a metal. Microstructure evolution in metal forming processes summarises the wealth of recent research on the mechanisms, modelling and control of microstructure evolution during metal forming processes. Part one reviews the general principles involved in understanding and controlling microstructure evolution in metal forming. Techniques for modelling microstructure and optimising processes are explored, along with recrystallisation, grain growth, and severe plastic deformation. Microstructure evolution in the processing of steel is the focus of part two, which reviews the modelling of phase transformations in steel, unified constitutive equations and work hardening in microalloyed steels. Part three examines microstructure evolution in the processing of other metals, including ageing behaviour in the processing of aluminium and microstructure control in processing nickel, titanium and other special alloys. With its distinguished editors and international team of expert contributors, Microstructure evolution in metal forming processes is an invaluable reference tool for metal processors and those using steels and other metals, as well as an essential guide for academics and students involved in fundamental metal research. Summarises the wealth of recent research on the mechanisms, modelling and control of microstructure evolution during metal forming processes Comprehensively discusses microstructure evolution in the processing of steel and reviews the modelling of phase transformations in steel, unified constitutive equations and work hardening in microalloyed steels Examines microstructure evolution in the processing of other materials, including ageing behaviour in the processing of aluminium

Download or read book Modeling Steel Deformation in the Semi Solid State written by Marcin Hojny and published by Springer. This book was released on 2017-09-07 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique approach to integrated high-temperature process modelling, intended to serve as a design aid for new metal processing technologies. The second edition has been substantially expanded to include new content such as: a new algorithm and test results of 3D stereoscopic visualization; new programming procedures for modelling; the validation of computer simulation using experimental results; a multiscale model of grain growth; a conceptual methodology developing “high-temperature” CCT (continuous cooling transformation) diagrams, and many more examples validating the numerical simulations. The models presented are applied in comprehensive tests in order to solve problems related to the high-temperature deformation of steel. The testing methods include both physical tests using specialist laboratory instruments, and advanced mathematical modelling: the Finite Element method (FE), Smoothed Particle Hydrodynamics method (SPH) and Mo nte Carlo method (MC).This approach, which integrates the fields of physical and computer-based simulations, forms the basis for the described concept of integrated high-temperature process modelling, presented in detail in this book.

Download or read book Metallurgical Design of Flat Rolled Steels written by Vladimir B. Ginzburg and published by CRC Press. This book was released on 2020-11-25 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines the basic principles of metallurgical design of flat rolled steels to obtain flat steel products with required metallurgical and mechanical properties. These principles establish the requirements for steel chemical composition and the process parameters, including steelmaking, reheating, hot rolling, annealing and cold rolling. Metallurgical Design of Flat Rolled Steels reviews the current theories and experimental works conducted in this area, and gives a comparative analysis of the obtained results in application to a large variety of steels produced around the world. This guide presents essential material in a fashion that permits rapid application to practical problems while providing the structure and understanding necessary for long-term growth. It first explains how the components fit and work together to make a successful experimental design, then analyzes each component in detail, presenting the various approaches in the form of menus of different strategies and options. Then the text illustrates equations developed by various researchers and compares them in both table and graphic forms. Written in a clear and concise manner, the material is presented using a modular or "building block" approach so readers get to see how the entire structure fits together and learn the essential techniques and terminology necessary to develop more complex designs and analyses.

Download or read book Oxide Scale Behavior in High Temperature Metal Processing written by Michal Krzyzanowski and published by John Wiley & Sons. This book was released on 2010-03-30 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The result of a fruitful, on-going collaboration between academia and industry, this book reviews recent advances in research on oxide scale behavior in high-temperature forming processes. Presenting novel, previously neglected approaches, the authors emphasize the pivotal role of reproducible experiments to elucidate the oxide scale properties and develop quantitative models with predictive accuracy. Each chapter consists of a detailed, systematic examination of different aspects of oxide scale formation with immediate impact for researchers and developers in industry. The clear and stringent style of presentation makes this monograph both coherent and easily readable.

Download or read book Advances in Fluid Mechanics VII written by M. Rahman and published by WIT Press. This book was released on 2008-05-09 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the latest developments in this field, this text features edited versions of papers presented at the Seventh International Conference on Advances in Fluid Mechanics.

Download or read book Metal Forming Science and Practice written by J.G. Lenard and published by Elsevier. This book was released on 2002-10-08 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication has been written to honour the contribution to science and education made by the Distinguished Professor Emeritus Professor Schey on his eightieth birthday. The contributors to his book are among the countless researchers who have read, studied and learned from Professor Schey's work, which includes books, research monographs, invited papers, keynote papers, scientific journals and conferences. The topics include manufacturing, sheet and bulk metal forming and tribology, amongst others. The topics included in this book include: John Schey and value-added manufacturing; Surface finish and friction in cold-metal rolling; Direct observation of interface for tribology in metal forming; An examination of the coefficient of friction; Studies on micro plasto hydrodynamic lubrication in metal forming; Numerical simulation of sheet metal forming; Geometric and mechanics model of sheet forming; Modelling and optimisation of metal forming processes; The mathematical modelling of hot rolling steel; Identification of rheological and tribological parameters; Oxide behaviour in hot rolling; Friction, lubrication and surface response in wire drawing; and Modelling and control of temper rolling and skin pass rolling.

Download or read book Internet of Production written by Christian Brecher and published by Springer Nature. This book was released on 2024-01-30 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This seminal compendium, available through open access, illuminates the forefront of digital collaboration in production. It introduces the visionary concept of the Internet of Production (IoP), an ambitious initiative by Germany's esteemed Cluster of Excellence at RWTH Aachen University. This handbook pioneers the integration of data, models, and knowledge across development, production, and user cycles, offering interdisciplinary insights into production technology's horizons with the overall objective to create a worldwide lab. The work is organized into seven key parts, each contributing to a comprehensive understanding of the IoP. Part I lays the foundation with interdisciplinary visions and concepts. Part II delves into IoP's infrastructure, encompassing digital shadows and actionable artificial intelligence. Part III examines materials within the digitalized production landscape. Part IV confronts the challenges and potentials of production processes under novel digitalization methods. Part V focuses on production management with data-driven decision support, while Part VI explores agile development processes. Finally, Part VII delves into the interplay between internal and external perspectives in the IoP, human-centered work design, and platform-based ecosystems. Supported by the German Research Foundation (DFG), this compendium redefines manufacturing through the transformative IoP lens. Embrace this scholarly endeavor to embrace technological advancement. This is an open access book.

Download or read book Physical and Numerical Simulation of Materials Processing VII written by L. Pentti Karjalainen and published by Trans Tech Publications Ltd. This book was released on 2013-07-01 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 7th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS 13), June 16-19, 2013, Oulu, Finland

Download or read book The Deformation and Processing of Structural Materials written by Z. X. Guo and published by Elsevier. This book was released on 2005-05-25 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having a good understanding of a construction material’s performance under different conditions is essential for helping engineers in selecting the right type of material for a job and for setting design specifications. Keeping abreast of the latest research is an important part of this. The deformation and processing of structural materials is divided into eight chapters, each one exploring a material’s processing and deformation behaviour. They also consider how the microstructural composition of materials is affected by processing and what influence this has on its subsequent in situ performance. The materials and behaviours looked at in the chapters include: aluminium and its alloys; magnesium alloys; ferrous alloys; superalloys (Ni-based alloys); semisolid metal (SSM) processing of metallic alloys; plastic deformation of intermetallic alloys; metal matrix composites (MMCs); and fine grain superplasticity in SP materials. The first of its kind to give comprehensive coverage to the subject, The deformation and processing of structural materials is a valuable resource for engineers, researchers in mechanical, civil and structural engineering. Contains research on the preformance of materials Valuable resource for researchers in mechanical, civil and structural engineering Comprehensive coverage to the deformation and processing of all types of structural materials

Download or read book Handbook of Software Solutions for ICME written by Georg J. Schmitz and published by John Wiley & Sons. This book was released on 2016-10-31 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the results of an ambitious project, this handbook provides a well-structured directory of globally available software tools in the area of Integrated Computational Materials Engineering (ICME). The compilation covers models, software tools, and numerical methods allowing describing electronic, atomistic, and mesoscopic phenomena, which in their combination determine the microstructure and the properties of materials. It reaches out to simulations of component manufacture comprising primary shaping, forming, joining, coating, heat treatment, and machining processes. Models and tools addressing the in-service behavior like fatigue, corrosion, and eventually recycling complete the compilation. An introductory overview is provided for each of these different modelling areas highlighting the relevant phenomena and also discussing the current state for the different simulation approaches. A must-have for researchers, application engineers, and simulation software providers seeking a holistic overview about the current state of the art in a huge variety of modelling topics. This handbook equally serves as a reference manual for academic and commercial software developers and providers, for industrial users of simulation software, and for decision makers seeking to optimize their production by simulations. In view of its sound introductions into the different fields of materials physics, materials chemistry, materials engineering and materials processing it also serves as a tutorial for students in the emerging discipline of ICME, which requires a broad view on things and at least a basic education in adjacent fields.

Download or read book Architecting Robust Co Design of Materials Products and Manufacturing Processes written by Anand Balu Nellippallil and published by Springer Nature. This book was released on 2020-06-13 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores systems-based, co-design, introducing a “Decision-Based, Co-Design” (DBCD) approach for the co-design of materials, products, and processes. In recent years there have been significant advances in modeling and simulation of material behavior, from the smallest atomic scale to the macro scale. However, the uncertainties associated with these approaches and models across different scales need to be addressed to enable decision-making resulting in designs that are robust, that is, relatively insensitive to uncertainties. An approach that facilitates co-design is needed across material, product design and manufacturing processes. This book describes a cloud-based platform to support decisions in the design of engineered systems (CB-PDSIDES), which feature an architecture that promotes co-design through the servitization of decision-making, knowledge capture and use templates that allow previous solutions to be reused. Placing the platform in the cloud aids mass collaboration and open innovation. A valuable reference resource reference on all areas related to the design of materials, products and processes, the book appeals to material scientists, design engineers and all those involved in the emerging interdisciplinary field of integrated computational materials engineering (ICME).

Download or read book Primer on Flat Rolling written by John G. Lenard and published by Newnes. This book was released on 2013-12-04 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primer on Flat Rolling is a fully revised second edition, and the outcome of over three decades of involvement with the rolling process. It is based on the author's yearly set of lectures, delivered to engineers and technologists working in the rolling metal industry. The essential and basic ideas involved in designing and analysis of the rolling process are presented. The book discusses and illustrates in detail the three components of flat rolling: the mill, the rolled metal, and their interface. New processes are also covered; flexible rolling and accumulative roll-bonding. The last chapter contains problems, with solutions that illustrate the complexities of flat rolling. New chapters include a study of hot rolling of aluminum, contributed by Prof. M. Wells; advanced applications of the finite element method, by Dr. Yuli Liu and by Dr. G. Krallics; roll design by Dr. J. B. Tiley and the history of the development of hot rolling mills, written by Mr. D. R. Adair and E. B. Intong. Engineers, technologists and students can all use this book to aid their planning and analysis of flat rolling processes. Provides clear descriptions for engineers and technologists working in steel mills Evaluates the predictive capabilities of mathematical models Assignments and their solutions are included within the text

Download or read book High Performance and Optimum Design of Structures and Materials written by W. P. De Wilde and published by WIT Press. This book was released on 2014-06-09 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of novel materials and new structural concepts nowadays is not restricted to highly technical areas like aerospace, aeronautical applications or the automotive industry, but affects all engineering fields including those such as civil engineering and architecture. Addressing issues involving advanced types of structures, particularly those based on new concepts or new materials and their system design, contributions highlight the latest developments in design, optimisation, manufacturing and experimentation. Also included are contributions on new software, numerical methods and different optimisation techniques. Optimisation problems of interest involve those related to size, shape and topology of structures and materials. Most high performance structures require the development of a generation of new materials, which can more easily resist a range of external stimuli or react in a non-conventional manner. Particular emphasis is placed on intelligent structures and materials as well as the application of computational methods for their modelling, control and management. Optimisation techniques have much to offer to those involved in the design of new industrial products. The formulation of optimum design has evolved from the time it was purely an academic topic, able now to satisfy the requirements of real life prototypes. The development of new algorithms and the appearance of powerful commercial computer codes, with easy to use graphical interfaces, have created a fertile field for the incorporation of optimisation in the design process in all engineering disciplines. This proceedings volume is the first from a new edition of the High Performance Design of Structures and Materials and the Optimum Design of Structures conferences, which follows the success of a number of meetings that originated in 1989. Topics covered include: Composite materials & structures; Material characterisation; Experiments and numerical analysis; Steel structures; High performance concretes; Natural fibre composites; Transformable structures; Lightweight structures; Timber structures; Environmentally friendly and sustainable structures; Emerging structural applications; Optimisation in civil engineering; Evolutionary methods in optimisation; Shape and topology optimisation; Aerospace structures; Structural optimisation; Biomechanics application; Material optimisation; Life cost optimisation; Intelligence structures and smart materials.

Download or read book Rod and Bar Rolling written by Youngseog Lee and published by CRC Press. This book was released on 2004-06-22 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rod and Bar Rolling: Theory and Applications highlights the underlying relationship between solid mechanics and materials science. It provides a detailed overview of the deformation of material at high temperatures, an assessment of rod and bar rolling processes, and an in-depth review of the basics of hot rolling, elasticity, plasticity, and recrystallization for a clear understanding of the solid mechanics in engineering applications. The also reference presents methods utilized at modern rod and bar rolling facilities and current topics such as interstand tension, roll wear at elevated temperatures, water cooling of a workpiece during rolling.

Download or read book Multiscale Modelling and Optimisation of Materials and Structures written by Tadeusz Burczynski and published by John Wiley & Sons. This book was released on 2022-05-19 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the very topical, crucial and original subject of parameter identification and optimization within multiscale modeling methods Multiscale Modelling and Optimization of Materials and Structures presents an important and challenging area of research that enables the design of new materials and structures with better quality, strength and performance parameters as well as the creation of reliable models that take into account structural, material and topological properties at different scales. The authors’ approach is four-fold; 1) the basic principles of micro and nano scale modeling techniques; 2) the connection of micro and/or nano scale models with macro simulation software; 3) optimization development in the framework of multiscale engineering and the solution of identification problems; 4) the computer science techniques used in this model and advice for scientists interested in developing their own models and software for multiscale analysis and optimization. The authors present several approaches such as the bridging and homogenization methods, as well as the general formulation of complex optimization and identification problems in multiscale modelling. They apply global optimization algorithms based on robust bioinspired algorithms, proposing parallel and multi-subpopulation approaches in order to speed-up computations, and discuss several numerical examples of multiscale modeling, optimization and identification of composite and functionally graded engineering materials and bone tissues. Multiscale Modelling and Optimization of Materials and Structures is thereby a valuable source of information for young scientists and students looking to develop their own models, write their own computer programs and implement them into simulation systems. Describes micro and nano scale models developed by the authors along with case studies of analysis and optimization Discusses the problems of computing costs, efficiency of information transfer, effective use of the computer memory and several other aspects of development of multiscale models Includes real physical, chemical and experimental studies with modern experimental techniques Provides a valuable source of information for young scientists and students looking to develop their own models, write their own computer programs, and implement them into simulation systems.

Download or read book Computational Materials Engineering written by Maciej Pietrzyk and published by Butterworth-Heinemann. This book was released on 2015-07-14 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Materials Engineering: Achieving High Accuracy and Efficiency in Metals Processing Simulations describes the most common computer modeling and simulation techniques used in metals processing, from so-called "fast" models to more advanced multiscale models, also evaluating possible methods for improving computational accuracy and efficiency. Beginning with a discussion of conventional fast models like internal variable models for flow stress and microstructure evolution, the book moves on to advanced multiscale models, such as the CAFÉ method, which give insights into the phenomena occurring in materials in lower dimensional scales. The book then delves into the various methods that have been developed to deal with problems, including long computing times, lack of proof of the uniqueness of the solution, difficulties with convergence of numerical procedures, local minima in the objective function, and ill-posed problems. It then concludes with suggestions on how to improve accuracy and efficiency in computational materials modeling, and a best practices guide for selecting the best model for a particular application. Presents the numerical approaches for high-accuracy calculations Provides researchers with essential information on the methods capable of exact representation of microstructure morphology Helpful to those working on model classification, computing costs, heterogeneous hardware, modeling efficiency, numerical algorithms, metamodeling, sensitivity analysis, inverse method, clusters, heterogeneous architectures, grid environments, finite element, flow stress, internal variable method, microstructure evolution, and more Discusses several techniques to overcome modeling and simulation limitations, including distributed computing methods, (hyper) reduced-order-modeling techniques, regularization, statistical representation of material microstructure, and the Gaussian process Covers both software and hardware capabilities in the area of improved computer efficiency and reduction of computing time