Download or read book Mathematical Analysis and Numerical Simulation of some Nonlinear Problems in Solid Mechanics written by María Teresa Sánchez Rúa and published by Univ Santiago de Compostela. This book was released on 2010 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical Modeling and Numerical Simulation in Continuum Mechanics written by Ivo Babuska and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first international symposium on mathematical foundations of the finite element method was held at the University of Maryland in 1973. During the last three decades there has been great progress in the theory and practice of solving partial differential equations, and research has extended in various directions. Full-scale nonlinear problems have come within the range of nu merical simulation. The importance of mathematical modeling and analysis in science and engineering is steadily increasing. In addition, new possibili ties of analysing the reliability of computations have appeared. Many other developments have occurred: these are only the most noteworthy. This book is the record of the proceedings of the International Sympo sium on Mathematical Modeling and Numerical Simulation in Continuum Mechanics, held in Yamaguchi, Japan from 29 September to 3 October 2000. The topics covered by the symposium ranged from solids to fluids, and in cluded both mathematical and computational analysis of phenomena and algorithms. Twenty-one invited talks were delivered at the symposium. This volume includes almost all of them, and expresses aspects of the progress mentioned above. All the papers were individually refereed. We hope that this volume will be a stepping-stone for further developments in this field.
Download or read book Nonlinear Solid Mechanics for Finite Element Analysis Dynamics written by Javier Bonet and published by Cambridge University Press. This book was released on 2021-03-18 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The perfect introduction to the theory and computer programming for the dynamic simulation of nonlinear solid mechanics.
Download or read book Nonlinear Solid Mechanics for Finite Element Analysis Statics written by Javier Bonet and published by Cambridge University Press. This book was released on 2016-06-23 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear and complete postgraduate introduction to the theory and computer programming for the complex simulation of material behavior.
Download or read book Error controlled Adaptive Finite Elements in Solid Mechanics written by Ekkehard Ramm and published by John Wiley & Sons. This book was released on 2002-12-30 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Methods are used for numerous engineering applications where numerical solutions of partial differential equations are needed. As computers can now deal with the millions of parameters used in these methods, automatic error estimation and automatic adaptation of the utilised method (according to this error estimation), has become a hot research topic. This text offers comprehensive coverage of this new field of automatic adaptation and error estimation, bringing together the work of eight outstanding researchers in this field who have completed a six year national research project within the German Science Foundation. The result is a state-of-the-art work in true reference style. Each chapter is self-contained and covers theoretical, algorithmic and software presentations as well as solved problems. A main feature consists of several carefully elaborated benchmarks of 2D- and 3D- applications. First book to go beyond the Finite Element Method in itself Covers material from a new research area Presents benchmarks of 2D- and 3D- applications Fits with the new trend for genetic strategies in engineering
Download or read book Non standard Discretisation Methods in Solid Mechanics written by Jörg Schröder and published by Springer Nature. This book was released on 2022-04-14 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume summarizes research being pursued within the DFG Priority Programme 1748: "Reliable Simulation Methods in Solid Mechanics. Development of non-standard discretisation methods, mechanical and mathematical analysis", the aim of which was to develop novel discretisation methods based e.g. on mixed finite element methods, isogeometric approaches as well as discontinuous Galerkin formulations, including a sound mathematical analysis for geometrically as well as physically nonlinear problems. The Priority Programme has established an international framework for mechanical and applied mathematical research to pursue open challenges on an inter-disciplinary level. The compiled results can be understood as state of the art in the research field and show promising ways of further research in the respective areas. The book is intended for doctoral and post-doctoral students in civil engineering, mechanical engineering, applied mathematics and physics, as well as industrial researchers interested in the field.
Download or read book Modeling in Engineering Using Innovative Numerical Methods for Solids and Fluids written by Laura De Lorenzis and published by Springer Nature. This book was released on 2020-02-08 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book examines innovative numerical methods for computational solid and fluid mechanics that can be used to model complex problems in engineering. It also presents innovative and promising simulation methods, including the fundamentals of these methods, as well as advanced topics and complex applications. Further, the book explores how numerical simulations can significantly reduce the number of time-consuming and expensive experiments required, and can support engineering decisions by providing data that would be very difficult, if not impossible, to obtain experimentally. It also includes chapters covering topics such as particle methods addressing particle-based materials and numerical methods that are based on discrete element formulations; fictitious domain methods; phase field models; computational fluid dynamics based on modern finite volume schemes; hybridizable discontinuous Galerkin methods; and non-intrusive coupling methods for structural models.
Download or read book The Finite Element Method for Solid and Structural Mechanics written by O. C. Zienkiewicz and published by Elsevier. This book was released on 2005-08-09 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the key text and reference for engineers, researchers and senior students dealing with the analysis and modelling of structures – from large civil engineering projects such as dams, to aircraft structures, through to small engineered components. Covering small and large deformation behaviour of solids and structures, it is an essential book for engineers and mathematicians. The new edition is a complete solids and structures text and reference in its own right and forms part of the world-renowned Finite Element Method series by Zienkiewicz and Taylor. New material in this edition includes separate coverage of solid continua and structural theories of rods, plates and shells; extended coverage of plasticity (isotropic and anisotropic); node-to-surface and 'mortar' method treatments; problems involving solids and rigid and pseudo-rigid bodies; and multi-scale modelling. - Dedicated coverage of solid and structural mechanics by world-renowned authors, Zienkiewicz and Taylor - New material including separate coverage of solid continua and structural theories of rods, plates and shells; extended coverage for small and finite deformation; elastic and inelastic material constitution; contact modelling; problems involving solids, rigid and discrete elements; and multi-scale modelling
Download or read book Numerical Simulation in Fluid Dynamics written by Michael Griebel and published by SIAM. This book was released on 1998-01-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this translation of the German edition, the authors provide insight into the numerical simulation of fluid flow. Using a simple numerical method as an expository example, the individual steps of scientific computing are presented: the derivation of the mathematical model; the discretization of the model equations; the development of algorithms; parallelization; and visualization of the computed data. In addition to the treatment of the basic equations for modeling laminar, transient flow of viscous, incompressible fluids - the Navier-Stokes equations - the authors look at the simulation of free surface flows; energy and chemical transport; and turbulence. Readers are enabled to write their own flow simulation program from scratch. The variety of applications is shown in several simulation results, including 92 black-and-white and 18 color illustrations. After reading this book, readers should be able to understand more enhanced algorithms of computational fluid dynamics and apply their new knowledge to other scientific fields.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Solid Interaction Dynamics written by Jing Tang Xing and published by Academic Press. This book was released on 2019-08-30 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid-Solid Interaction Dynamics: Theory, Variational Principles, Numerical Methods and Applications gives a comprehensive accounting of fluid-solid interaction dynamics, including theory, numerical methods and their solutions for various FSI problems in engineering. The title provides the fundamental theories, methodologies and results developed in the application of FSI dynamics. Four numerical approaches that can be used with almost all integrated FSI systems in engineering are presented. Methods are linked with examples to illustrate results. In addition, numerical results are compared with available experiments or numerical data in order to demonstrate the accuracy of the approaches and their value to engineering applications. The title gives readers the state-of-the-art in theory, variational principles, numerical modeling and applications for fluid-solid interaction dynamics. Readers will be able to independently formulate models to solve their engineering FSI problems using information from this book. - Presents the state-of-the-art in fluid-solid interaction dynamics, providing theory, method and results - Takes an integrated approach to formulate, model and simulate FSI problems in engineering - Illustrates results with concrete examples - Gives four numerical approaches and related theories that are suitable for almost all integrated FSI systems - Provides the necessary information for bench scientists to independently formulate, model, and solve physical FSI problems in engineering
Download or read book Dynamics Of Complex Fluids Proceedings Of The Second Royal Society unilever Indo uk Forum In Materials Science And Engineering written by M J Adams and published by World Scientific. This book was released on 1998-08-08 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume records the presentations and discussions at the Second Royal Society-Unilever Indo-UK Forum on 'Dynamics of Complex Fluids' which was the culmination of the six-month programme on this topic organised at the Issac Newton Institute for Mathematical Sciences, Cambridge University.The authors of this important volume present an up-to-date, wide-ranging view on developments in the analysis of complex fluid behaviour. Emphasis is placed upon the relation between small-scale structure and large-scale response: this brings together the approaches of molecular physics and continuum mechanics.Experiments, constitutive models and computer simulations are combined to yield new insights into the flow behaviour of polymer melts and solutions, colloidal and neutral particle suspensions, and pastes and soils.
Download or read book Mathematical Modelling in Solid Mechanics written by Francesco dell'Isola and published by Springer. This book was released on 2017-03-10 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new research results in multidisciplinary fields of mathematical and numerical modelling in mechanics. The chapters treat the topics: mathematical modelling in solid, fluid and contact mechanics nonconvex variational analysis with emphasis to nonlinear solid and structural mechanics numerical modelling of problems with non-smooth constitutive laws, approximation of variational and hemivariational inequalities, numerical analysis of discrete schemes, numerical methods and the corresponding algorithms, applications to mechanical engineering numerical aspects of non-smooth mechanics, with emphasis on developing accurate and reliable computational tools mechanics of fibre-reinforced materials behaviour of elasto-plastic materials accounting for the microstructural defects definition of structural defects based on the differential geometry concepts or on the atomistic basis interaction between phase transformation and dislocations at nano-scale energetic arguments bifurcation and post-buckling analysis of elasto-plastic structures engineering optimization and design, global optimization and related algorithms The book presents selected papers presented at ETAMM 2016. It includes new and original results written by internationally recognized specialists.
Download or read book Nonlinear Finite Element Methods written by Peter Wriggers and published by Springer Science & Business Media. This book was released on 2008-09-24 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element methods have become ever more important to engineers as tools for design and optimization, now even for solving non-linear technological problems. However, several aspects must be considered for finite-element simulations which are specific for non-linear problems: These problems require the knowledge and the understanding of theoretical foundations and their finite-element discretization as well as algorithms for solving the non-linear equations. This book provides the reader with the required knowledge covering the complete field of finite element analyses in solid mechanics. It is written for advanced students in engineering fields but serves also as an introduction into non-linear simulation for the practising engineer.
Download or read book Frontiers in Mathematical Analysis and Numerical Methods written by Jacques-Louis Lions and published by World Scientific. This book was released on 2004 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable volume is a collection of articles in memory ofJacques-Louis Lions, a leading mathematician and the founder of theContemporary French Applied Mathematics School. The contributions havebeen written by his friends, colleagues and students, including CBardos, A Bensoussan, S S Chern, P G Ciarlet, R Glowinski, Gu Chaohao, B Malgrange, G Marchuk, O Pironneau, W Strauss, R Temam, etc
Download or read book Handbook of Materials Modeling written by Sidney Yip and published by Springer Science & Business Media. This book was released on 2007-11-17 with total page 2903 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first reference of its kind in the rapidly emerging field of computational approachs to materials research, this is a compendium of perspective-providing and topical articles written to inform students and non-specialists of the current status and capabilities of modelling and simulation. From the standpoint of methodology, the development follows a multiscale approach with emphasis on electronic-structure, atomistic, and mesoscale methods, as well as mathematical analysis and rate processes. Basic models are treated across traditional disciplines, not only in the discussion of methods but also in chapters on crystal defects, microstructure, fluids, polymers and soft matter. Written by authors who are actively participating in the current development, this collection of 150 articles has the breadth and depth to be a major contributor toward defining the field of computational materials. In addition, there are 40 commentaries by highly respected researchers, presenting various views that should interest the future generations of the community. Subject Editors: Martin Bazant, MIT; Bruce Boghosian, Tufts University; Richard Catlow, Royal Institution; Long-Qing Chen, Pennsylvania State University; William Curtin, Brown University; Tomas Diaz de la Rubia, Lawrence Livermore National Laboratory; Nicolas Hadjiconstantinou, MIT; Mark F. Horstemeyer, Mississippi State University; Efthimios Kaxiras, Harvard University; L. Mahadevan, Harvard University; Dimitrios Maroudas, University of Massachusetts; Nicola Marzari, MIT; Horia Metiu, University of California Santa Barbara; Gregory C. Rutledge, MIT; David J. Srolovitz, Princeton University; Bernhardt L. Trout, MIT; Dieter Wolf, Argonne National Laboratory.
Download or read book Nonlinear Control and Analytical Mechanics written by Harry G. Kwatny and published by Springer Science & Business Media. This book was released on 2000-09-08 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade we have had to confront a series of control design prob lems - involving, primarily, multibody electro-mechanical systems - in which nonlinearity plays an essential role. Fortunately, the geometric theory of non linear control system analysis progressed substantially during the 1980s and 90s, providing crucial conceptual tools that addressed many of our needs. However, as any control systems engineer can attest, issues of modeling, computation, and implementation quickly become the dominant concerns in practice. The prob lems of interest to us present unique challenges because of the need to build and manipulate complex mathematical models for both the plant and controller. As a result, along with colleagues and students, we set out to develop computer algebra tools to facilitate model building, nonlinear control system design, and code generation, the latter for both numerical simulation and real time con an outgrowth of that continuing effort. As trol implementation. This book is a result, the unique features of the book includes an integrated treatment of nonlinear control and analytical mechanics and a set of symbolic computing software tools for modeling and control system design. By simultaneously considering both mechanics and control we achieve a fuller appreciation of the underlying geometric ideas and constructions that are common to both. Control theory has had a fruitful association with analytical mechanics from its birth in the late 19th century.
