Download or read book Materials Theory Simulations and Parallel Algorithms Volume 408 written by Efthimios Kaxiras and published by . This book was released on 1996-07-02 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant advances have been made towards understanding the properties of materials through theoretical approaches. These approaches are based either on first-principles quantum mechanical formulations or semi-empirical formulations, and have benefitted from increases in computational power. The advent of parallel computing has propelled the theoretical approaches to a new level of realism in modelling physical systems of interest. The theoretical methods and simulation techniques that are cur- rently under development are certain to become powerful tools in understanding, exploring and predicting the properties of existing and novel materials. This book discusses critically current developments in computations and simulational approaches specifically aimed at addressing real materials problems, with an emphasis on parallel computing and shows the most successful applications of computational and simulational work to date. Topics include: advances in computational methods; parallel algorithms and applications; fracture, brittle/ductile behavior and large-scale defects; thermodynamic stability of materials; surfaces and interfaces of materials; and complex materials simulations.

Download or read book Symposium Proceedings Materials Theory Simulations and Parallel Algorithms Held in Boston Massachusetts on 27 November 1 December 1995 written by and published by . This book was released on 1996 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant advances have been made recently toward understanding the properties of materials through theoretical approaches. These approaches are based either on first-principles quantum mechanical formulations or semi-empirical formulations, and have benefitted from increases in computational power. The advent of parallel computing has propelled the theoretical approaches to a new level of realism in modeling physical systems of interest. The theoretical methods and simulation techniques that are currently under development are bound to become powerful tools in understanding, exploring and predicting the properties of existing and novel materials. The aim of this symposium was to bring together scientists from several subfields of materials theory and simulations. Its purpose was: to make contact with traditional continuum approaches to materials theory; to discuss critically current developments in computational and simulational approaches specifically aimed at addressing real materials problems, and with emphasis on parallel computing; and to present examples of the most successful applications of computational and simulational work to date.

Download or read book Superplasticity in Advanced Materials ICSAM 2003 written by Richard Todd and published by Trans Tech Publications Ltd. This book was released on 2004-02-15 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Superplastic forming (SPF) has come a long way from its relatively recent history of being of interest only to the aerospace and aeronautical industries, and has made rapid inroads into applications in the automotive, rail, architectural, sports, dental and entertainment sectors.

Download or read book Electronic Structure of Disordered Alloys Surfaces and Interfaces written by Ilja Turek and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present, there is an increasing interest in the prediction of properties of classical and new materials such as substitutional alloys, their surfaces, and metallic or semiconductor multilayers. A detailed understanding based on a thus of the utmost importance for fu microscopic, parameter-free approach is ture developments in solid state physics and materials science. The interrela tion between electronic and structural properties at surfaces plays a key role for a microscopic understanding of phenomena as diverse as catalysis, corrosion, chemisorption and crystal growth. Remarkable progress has been made in the past 10-15 years in the understand ing of behavior of ideal crystals and their surfaces by relating their properties to the underlying electronic structure as determined from the first principles. Similar studies of complex systems like imperfect surfaces, interfaces, and mul tilayered structures seem to be accessible by now. Conventional band-structure methods, however, are of limited use because they require an excessive number of atoms per elementary cell, and are not able to account fully for e.g. substitu tional disorder and the true semiinfinite geometry of surfaces. Such problems can be solved more appropriately by Green function techniques and multiple scattering formalism.

Download or read book Properties of Complex Inorganic Solids written by A. Gonis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is common practice today to use the term "alloy" in connection with specific classes of materials, with prominence given to metals and semiconductors. However, there is good justification for considering alloys in a unified manner based on properties rather than types of materials because, after all, to alloy means to mix. The scientific aspects of mixing together different materials has a very long history going back to early attempts to understand and control materials behavior for the service of mankind. The case for using the scientific term "alloy" to mean any material consisting of more than one element can be based on the following two considerations. First, many alloys are mixtures of metallic, semiconducting, and/or insulating materials, and the properties of an alloy, i.e., metallic, semiconducting, or insulating, are often functions of composition and of external conditions, such as temperature and pressure. Second, and most importantly, in attempting to understand the various properties of materials, whether physical, chemical, or mechanical,one is apt to use the terminology and experimental, formal, and computational methods in their study that transcend the type of material being studied.

Download or read book Optoelectronic Materials Volume 417 written by Eric D. Jones and published by . This book was released on 1996-07-02 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the effects of spontaneous ordering or composition modulation on the properties of semiconductors and optoelectronic devices have been studied with great interest over the past several years, an understanding of the physics and chemistry of these two related phenomena is still in its infancy. This book brings together researchers from around the world to address issues concerning the physics, chemistry and growth parameters for spontaneous ordering and composition modulation. Developments in the use of artificial patterning to obtain new structured materials on a microscopic scale are featured. Advances in characterization techniques are also presented. Topics include: spontaneous ordering; self-assembled structures and quantum dots; self-organized epitaxial structures; composition modulation studies and optoelectronic materials.

Download or read book Layered Materials for Structural Applications Volume 434 written by J. J. Lewandowski and published by . This book was released on 1996-10-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Layered materials and systems based on metallic, intermetallic, polymeric and ceramic constituents have become increasingly important in meeting the structural requirements of current and future high-performance products. This book brings together investigators from industry, academia and government to focus on the structural applications of layered systems. Thermal barrier coatings, aircraft structural components and wear-resistant coatings for a wide variety of applications are highlighted. Processing techniques such as EB deposition, reactive sputter deposition, sedimentation processing, pressureless cosintering and rapid prototyping via laminated object manufacturing are also covered. And while microstability issues are addressed, they appear to be a critical area where further investigation is required. The largest number of papers focus on the mechanical behavior and modelling of layered systems and reveal significant effects of layer thickness, spacing and constituent properties on the fracture and fatigue behavior of such systems. Topics include: applications; processing; stability issues and mechanical behavior.

Download or read book Disordered Materials and Interfaces Volume 407 written by Herman Z. Cummins and published by . This book was released on 1996-03-26 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the fractal aspects of materials and disordered systems. Disorder plays a critical role in many naturally occurring and manufactured materials, both at the microscopic level (e.g., glasses) and the macroscopic level (e.g., foams, dendritic alloys, porous rock). The book addresses the dynamical processes involved in the formation and characterization of a wide range of disordered materials. Topics include: porous media; colloids; chemical reactions; dynamical aspects of the liquid-glass transition; disordered materials and surfaces and scaling and nanostructures.

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials Reliability in Microelectronics VI Volume 428 written by William F. Filter and published by . This book was released on 1996-11-18 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: MRS books on materials reliability in microelectronics have become the snapshot of progress in this field. Reduced feature size, increased speed, and larger area are all factors contributing to the continual performance and functionality improvements in integrated circuit technology. These same factors place demands on the reliability of the individual components that make up the IC. Achieving increased reliability requires an improved understanding of both thin-film and patterned-feature materials properties and their degradation mechanisms, how materials and processes used to fabricate ICs interact, and how they may be tailored to enable reliability improvements. This book focuses on the physics and materials science of microelectronics reliability problems rather than the traditional statistical, accelerated electrical testing aspects. Studies are grouped into three large sections covering electromigration, gate oxide reliability and mechanical stress behavior. Topics include: historical summary; reliability issues for Cu metallization; characterization of electromigration phenomena; modelling; microstructural evolution and influences; oxide and device reliability; thin oxynitride dielectrics; noncontact diagnostics; stress effects in thin films and interconnects and microbeam X-ray techniques for stress measurements.

Download or read book Thermodynamics and Kinetics of Phase Transformations Volume 398 written by James S. Im and published by . This book was released on 1996-09-10 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emphasis of this book is on the quantitative analysis of transformation kinetics, integrated with thermodynamics. Solidification is a success story for quantitative kinetics analysis. The work reported concentrates on phase selection under extreme processing - large undercooling or ultrarapid quenching - of the liquid. Theoretical treatments are concerned mainly with the analysis of morphological instabilities during directional solidification at more conventional rates. The coverage of particle-beam effects is distinguished by the materials studied: alkali halides, minerals, semiconductors and metals. The thermodynamics of interfaces are a particular focus, especially in connection with the solid-state formation of amorphous phases. A highlight of the book is the coverage of the Johnson-Mehl-Avrami-Kolmogorov analysis of overall transformation kinetics. This venerable treatment is revisited and new insights and limitations are explored. Topics include: transformations in undercooled liquids; directional solidification; particle beam-induced transformations; interfaces - thermodynamics and reactions; amorphous materials - structure and transformations; solid-state transformations and ordering and phase separation.

Download or read book Compound Semiconductor Electronics and Photonics Volume 421 written by R. J. Shul and published by . This book was released on 1996-10-14 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-V semiconductors have continued to find new applications in optical data transmission, full-color displays, automotive electronics and personal communication systems. Complex epitaxial growth, processing, device design and circuit architecture are all necessary for realization of these elements. This book brings together the diverse group of scientists and researchers that are required to develop the next-generation devices. The wide bandgap nitrides, GaN, AlN, InN and their alloys are featured. The commercial availability of blue- and green-light-emitting diodes based on the InGaN/AlGaN system, and the recent announcement of pulsed operation of a laser diode, have stimulated interest in the growth, characterization and processing of these materials. Potential applications in high-temperature/high-power electronics appear promising because of the good transport properties of these nitrides. Topics include: growth and characterization; photonics and processing; electronics and processing; wide bandgap semiconductors and novel devices and processing.

Download or read book Spectroscopic Properties of Inorganic and Organometallic Compounds written by G Davidson and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopic Properties of Inorganic and Organometallic Compounds provides a unique source of information on an important area of chemistry. Divided into sections mainly according to the particular spectroscopic technique used, coverage in each volume includes: NMR (with reference to stereochemistry, dynamic systems, paramagnetic complexes, solid state NMR and Groups 13-18); nuclear quadrupole resonance spectroscopy; vibrational spectroscopy of main group and transition element compounds and coordinated ligands; and electron diffraction. Reflecting the growing volume of published work in this field, researchers will find this Specialist Periodical Report an invaluable source of information on current methods and applications. Specialist Periodical Reports provide systematic and detailed review coverage in major areas of chemical research. Compiled by teams of leading experts in their specialist fields, this series is designed to help the chemistry community keep current with the latest developments in their field. Each volume in the series is published either annually or biennially and is a superb reference point for researchers. www.rsc.org/spr

Download or read book Advanced Laser Processing of Materials Volume 397 written by Rajiv K. Singh and published by . This book was released on 1996-09-09 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser processing has been used in a wide variety of applications and materials such as semiconductors, superconductors, ceramics, polymers and metals. Lasers provide a controlled source of atomic and electronic excitations involving nonequilibrium phenomena that lend themselves to processing of novel materials and structures. The range of laser-solid interactions involving electronic excitation, melting and evaporation result in the formation of novel phases, selective gas excitations, surface modification and low-temperature thin-film deposition. This book from MRS focuses on the use of lasers in both the fundamental understanding and applied aspects of laser-solid and laser-gas interactions relevant to materials processing. Applications featured include thin-film transistors formed by laser-induced crystallization of amorphous silicon, diamond coatings and micromachining. Topics include: fundamentals of laser-solid interactions; fundamentals of pulsed laser ablation; pulsed laser deposition; novel applications of laser processing; laser-driven formation of nanocrystals; laser annealing; surface modification and etching; and laser-assisted chemical vapor deposition.

Download or read book Rare Earth Doped Semiconductors II Volume 422 written by S. Coffa and published by . This book was released on 1996 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rare-earth doped semiconductors hold great potential for a variety of optoelectronic applications, including lasers, LEDs and optical amplifiers. In fact, the field has grown rapidly over the past several years, with a clear switch in direction. The first book by this name was devoted to rare-earth doped II-VI and III-V semiconductors; more than half of the papers in this new volume are devoted to rare-earth doped silicon. This indicates that rare-earth doping of silicon is now seriously considered as a means to achieve silicon-based optoelectronic devices. In addition, new reports on rare-earth doped III-nitrides are also presented. Researchers from 14 countries come together in the volume to discuss current trends, highlight new developments and identify potential electronic and optoelectronic applications. Topics include: incorporation methods and properties; structural, electrical and optical properties; excitation mechanisms and electroluminescence and integration.

Download or read book Covalent Ceramics III Volume 410 written by Aloysius F. Hepp and published by . This book was released on 1996-08-14 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: In years prior, there has been considerable research activity in an exciting class of materials - non-oxide covalent ceramics. These nitrides, carbides, sulfides and related materials have found a wide range of use, from electronics to aerospace/defense, optical sensors and devices, and mechanical/structural applications. In this book, the third in a continuing series, chemists, physicists, ceramists and materials scientists and engineers from around the world come together to share research and highlight recent advances in non-oxide materials. In contrast to its predecessors, the focus of the volume is less on production and fabrication, and more on applications and properties. Topics include: non-oxides for electronics and optoelectronics; preparation of bulk non-oxide ceramics; science of covalent ceramics - bonding, structure and microstructure; fabrication of covalent ceramic thin films; and technology of covalent ceramics - surfaces, composites and processing.

Download or read book Microwave Processing of Materials V Volume 430 written by Materials Research Society. Meeting and published by . This book was released on 1996-10-28 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on an international gathering of scientists and engineers from 17 countries, this book, the fifth in a continuing series, assesses microwave processing of materials as an emerging technology. Significant advances in understanding and control of microwave energy and its use in the processing and testing of materials are outlined. Future research and development needs are also explored. Topics include: scale-up and commercialization; microwave nondestructive testing; microwave processing; microwave system design; dielectric properties measurements and analysis; modelling of microwave heating; microwave interactions and mechanisms; microwave processing using variable frequency sources; alternate microwave sources; remediation of hazardous waste; temperature modelling and measurements; microwave processing of polymers; and plasma processing.