Download or read book Engineering Materials Technology written by James A. Jacobs and published by Prentice Hall. This book was released on 1985 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Technology written by Yvonne Dean and published by Routledge. This book was released on 2016-07-01 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Technology clearly identifies materials and technology as the fundamental generators of buildings and examines how they determine the structure, overall form and quality. It examines the issues that determine the choice of materials, and argues that the decision-making of architects, engineers and designers should take account of the environmental impact of sourcing the basic materials, and of the energy implications of their processing and use in manufacturing. Materials Technology is an essential resource for Materials Technology units in building, architecture and surveying degree and postgraduate courses; and students of BTEC HNC/D building and surveying. It will also be a useful reference tool for Advanced GNVQ Construction and the Built Environment courses and Built Environment NVQs at levels 3 and 4.
Download or read book Ancient Egyptian Materials and Technology written by Paul T. Nicholson and published by Cambridge University Press. This book was released on 2000-03-23 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes current research into all aspects of craftwork in ancient Egypt.
Download or read book Asphalt Materials Science and Technology written by James G. Speight and published by Butterworth-Heinemann. This book was released on 2015-10-01 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt is a complex but popular civil engineering material. Design engineers must understand these complexities in order to optimize its use. Whether or not it is used to pave a busy highway, waterproof a rooftop or smooth out an airport runway, Asphalt Materials Science and Technology acquaints engineers with the issues and technologies surrounding the proper selection and uses of asphalts. With this book in hand, researchers and engineering will find a valuable guide to the production, use and environmental aspect of asphalt. Covers the Nomenclature and Terminology for Asphalt including: Performance Graded (PG) Binders, Asphalt Cement (AC), Asphalt-Rubber (A-R) Binder, Asphalt Emulsion and Cutback Asphalt Includes Material Selection Considerations, Testing, and applications Biodegradation of Asphalt and environmental aspects of asphalt use
Download or read book Materials Technology written by Robert Snedden and published by Capstone Classroom. This book was released on 2007 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series, available for the first time in paperback, explores aspects of change in materials, including material characteristics and states of matter. It also covers uses, material processes, and the technology used to make or alter materials. Experiment boxes, activities, and profiles of famous scientists and discoveries round out each book.
Download or read book Advances in Materials Technology for Fossil Power Plants written by D. Gandy and J. Shingledecker and published by ASM International. This book was released on 2014-01-01 with total page 1520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference proceedings covering the latest technology developments for fossil fuel power plants, including nickel-based alloys for advanced ultrasupercritical power plants, materials for turbines, oxidation and corrosion, welding and weld performance, new alloys concepts, and creep and general topics.
Download or read book Advances in Mechanical and Materials Technology written by Kannan Govindan and published by Springer Nature. This book was released on 2022-01-01 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select papers from the International Conference on Energy, Material Sciences and Mechanical Engineering (EMSME) - 2020. The book covers the three core areas of energy, material sciences and mechanical engineering. The topics covered include non-conventional energy resources, energy harvesting, polymers, composites, 2D materials, systems engineering, materials engineering, micro-machining, renewable energy, industrial engineering and additive manufacturing. This book will be useful to researchers and professionals working in the areas of mechanical and industrial engineering, materials applications, and energy technology.
Download or read book Army Materials Technology Laboratory Closure written by and published by . This book was released on 1991 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Jets in the Development of New Materials Technology written by O. P. Solonenko and published by VSP. This book was released on 1990 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demands of industry for creating new functional materials with predetermined properties have stimulated an increasing interest in the investigation of processes occurring in plasma jets of complex chemical composition (homogeneous and heterogeneous) as well as their interaction with hard surfaces. This Proceedings volume contains contributions from leading international specialists on plasma science and technology which were presented at the 2nd International Workshop ''Plasma Jets in the Development in of New Materials Technology'', 3--9 September 1990, Frunze (USSR). The scope of the workshop incorporated the following aspects: -- modelling of the processes of momentum heat and mass transfer in homogeneous and heterogeneous plasma jets as well as interaction between the particles and the base; -- diagnostics of the parameters of gas and disperse phases in plasma flows; -- plasma-spraying processes investigations; -- processes of treatment and production of materials, including powder materials.
Download or read book Army Material Technology Laboratory Reuse and Disposal Town of Watertown Middlesex County Norfolk County Suffolk County Essex County written by and published by . This book was released on 1995 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials Technology written by S.M. Sapuan and published by CRC Press. This book was released on 2009-12-23 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial neural networks (ANN) can provide new insight into the study of composite materials and can normally be combined with other artificial intelligence tools such as expert system, genetic algorithm, and fuzzy logic. Because research on this field is very new, there is only a limited amount of published literature on the subject.Compiling in
Download or read book New structural materials technologies opportunities for the use of advanced ceramics and composites written by United States. Office of Technology Assessment and published by DIANE Publishing. This book was released on 1986 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Structural Materials Technologies written by and published by . This book was released on 1986 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technology for the United States Navy and Marine Corps 2000 2035 written by and published by National Academies. This book was released on 1997 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The future national security environment will present the naval forces with operational challenges that can best be met through the development of military capabilities that effectively leverage rapidly advancing technologies in many areas. The panel envisions a world where the naval forces will perform missions in the future similar to those they have historically undertaken. These missions will continue to include sea control, deterrence, power projection, sea lift, and so on. The missions will be accomplished through the use of platforms (ships, submarines, aircraft, and spacecraft), weapons (guns, missiles, bombs, torpedoes, and information), manpower, materiel, tactics, and processes (acquisition, logistics, and so on.). Accordingly, the Panel on Technology attempted to identify those technologies that will be of greatest importance to the future operations of the naval forces and to project trends in their development out to the year 2035. The primary objective of the panel was to determine which are the most critical technologies for the Department of the Navy to pursue to ensure U.S. dominance in future naval operations and to determine the future trends in these technologies and their impact on Navy and Marine Corps superiority. A vision of future naval operations ensued from this effort. These technologies form the base from which products, platforms, weapons, and capabilities are built. By combining multiple technologies with their future attributes, new systems and subsystems can be envisioned. Technology for the United States Navy and Marine Corps, 2000-2035 Becoming a 21st-Century Force: Volume 2: Technology indentifies those technologies that are unique to the naval forces and whose development the Department of the Navy clearly must fund, as well as commercially dominated technologies that the panel believes the Navy and Marine Corps must learn to adapt as quickly as possible to naval applications. Since the development of many of the critical technologies is becoming global in nature, some consideration is given to foreign capabilities and trends as a way to assess potential adversaries' capabilities. Finally, the panel assessed the current state of the science and technology (S&T) establishment and processes within the Department of the Navy and makes recommendations that would improve the efficiency and effectiveness of this vital area. The panel's findings and recommendations are presented in this report.
Download or read book Manufacturing Technology written by Helmi A. Youssef and published by CRC Press. This book was released on 2023-08-17 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition textbook provides comprehensive knowledge and insight into various aspects of manufacturing technology, processes, materials, tooling, and equipment. Its main objective is to introduce the grand spectrum of manufacturing technology to individuals who will be involved in the design and manufacturing of finished products and to provide them with basic information on manufacturing technologies. Manufacturing Technology: Materials, Processes, and Equipment, Second Edition, is written in a descriptive manner, where the emphasis is on the fundamentals of the process, its capabilities, typical applications, advantages, and limitations. Mathematical modeling and equations are used only when they enhance the basic understanding of the material dealt with. The book is a fundamental textbook that covers all the manufacturing processes, materials, and equipment used to convert the raw materials to a final product. It presents the materials used in manufacturing processes and covers the heat treatment processes, smelting of metals, and other technological processes such as casting, forming, powder metallurgy, joining processes, and surface technology. Manufacturing processes for polymers, ceramics, and composites are also covered. The book also covers surface technology, fundamentals of traditional and nontraditional machining processes, numerical control of machine tools, industrial robots and hexapods, additive manufacturing, and industry 4.0 technologies. The book is written specifically for undergraduates in industrial, manufacturing, mechanical, and materials engineering disciplines of the second to fourth levels to cover complete courses of manufacturing technology taught in engineering colleges and institutions all over the world. It also covers the needs of production and manufacturing engineers and technologists participating in related industries where it is expected to be part of their professional library. Additionally, the book can be used by students in other disciplines concerned with design and manufacturing, such as automotive and aerospace engineering.
Download or read book New Materials Processes and Methods Technology written by Mel Schwartz and published by CRC Press. This book was released on 2005-11-04 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials selection is a crucial factor in determining the cost, quality, and corrosion protection for every engineering project. The variety of increasingly durable materials and their combinations, coupled with the rise of new and more critical service requirements and the demand for lower costs, have expanded upon trial-and-error criteria into m
Download or read book Image Analysis written by Leszek Wojnar and published by CRC Press. This book was released on 2019-08-21 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minimizing theoretical background and mathematical formalism, Image Analysis sets forth the basic principles of image acquisition, enhancement, measurements, and interpretation in a very simple form, focused on applications and the properties of available tools. The author lists different tasks and offers complete solutions to these tasks based on his extensive experience with the procedures described. The book provides a multitude of illustrations, drawings, and bitmaps and serves as an outstanding resource for specialists using image analysis equipment, including technicians and students.
