Download or read book Materials Surface Processing by Directed Energy Techniques written by Yves Pauleau and published by Elsevier. This book was released on 2006-04-25 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current status of the science and technology related to coatings, thin films and surface modifications produced by directed energy techniques is assessed in Materials Surface Processing by Directed Energy Techniques. The subject matter is divided into 20 chapters - each presented at a tutorial level – rich with fundamental science and experimental results. New trends and new results are also evoked to give an overview of future developments and applications. Provides a broad overview on modern coating and thin film deposition techniques, and their applications Presents and discusses various problems of physics and chemistry involved in the production, characterization and applications of coatings and thin films Each chapter includes experimental results illustrating various models, mechanisms or theories

Download or read book Advanced Techniques for Surface Engineering written by W. Gissler and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's shortages of resources make the search for wear and corrosion resistant materials one of the most important tasks of the next century. Since the surface of a material is the location where any interaction occurs, it is that there the hardest requirements on the material are imposed: to be wear resistant for tools and bearings; to be corrosion resistant for turbine blades and tubes in the petrochemical industry; to be antireflecting for solar cells; to be decorative for architectural panels and to combine several of these properties in other applications. Surface engineering is the general term that incorporates all the techniques by which a surface modification can be accomplished. These techniques include both coating and modification of the surface by ion implantation and laser beam melting. In recent years a continuously growing number of these techniques were developed to the extent that it became more and more difficult to maintain an overlook and to understand which of these highly differentiated techniques might be applied to resolve a given surface engineering problem. A similar development is also occuring for surface characterization techniques. This volume contains contributions from renowned scientists and engineers to the Eurocourse the aim of which was to inform about the various techniques and to give a comprehensive survey of the latest development on this subject.

Download or read book Surface Processing of Light Alloys Subject to Concentrated Energy Flows written by Xizhang Chen and published by Springer Nature. This book was released on 2021-01-22 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents studies on the surface modification of aluminum and titanium alloys by electric explosive alloying and electron-beam processing. It also describes and analyzes the physical mechanism of energy actions of these technologies on physical and mechanical properties and discusses their potential use in industry to improve the characteristics of finished products. The book is intended for specialists in the field of condensed matter physics, metallurgy and heat treatment and materials science, as well as graduate and senior students in relevant fields.

Download or read book Materials Surface Processing written by E. E. Marinero and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal Spray Coatings Materials Techniques Applications written by Santosh Kumar and published by Bentham Science Publishers. This book was released on 2024-07-30 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book explores the techniques, materials, and real-world applications of thermal spray coatings across various industries, including power generation, aerospace, medical, and automotive sectors. Readers will learn about the basic science and engineering aspects of thermal spray technology, its historical developments, and the diverse range of materials used, from metallic to ceramic materials, and nano-crystallization materials. Distinct thermal spray techniques are explained (flame spray, detonation-gun spray, high-velocity oxy-fuel spray, electric arc spray, plasma spray and cold spray). Chapters on advanced topics also give an understanding of crucial material properties such as high temperature corrosion, oxidation, erosion or wear resistance, and biocompatibility. Key features - Contributions from materials science experts with references for each topic - Gives a comprehensive overview of materials and distinct spray techniques used in thermal coatings - Dedicated chapters for applications of thermal coatings in different industries - Covers recent trends and new advances such as surface modification techniques to improve functionality and performance This book is intended as a resource for an in-depth understanding of the fundamentals and applications of thermal spray coatings for students, professionals and researchers in materials science and chemical engineering disciplines.

Download or read book Tribology and Surface Engineering for Industrial Applications written by Catalin I. Pruncu and published by CRC Press. This book was released on 2021-11-23 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is a multidisciplinary science that encompasses mechanical engineering, materials science, surface engineering, lubricants, and additives chemistry with tremendous applications. Tribology and Surface Engineering for Industrial Applications discusses the latest in tribology and surface engineering for industrial applications. This book: Offers information on coatings and surface diagnostics Explains a variety of techniques for improved performance Describes applications in automotive, wheel and rail materials, manufacturing, and wind turbines Written for researchers and advanced students, this book encompasses a wide-ranging view of the latest in industrial applications of tribology and surface engineering for a variety of cross-disciplinary applications.

Download or read book Encyclopedia of Plasma Technology Two Volume Set written by J. Leon Shohet and published by CRC Press. This book was released on 2016-12-12 with total page 3082 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical plasmas have a wide range of industrial applications. The Encyclopedia of Plasma Technology covers all aspects of plasma technology from the fundamentals to a range of applications across a large number of industries and disciplines. Topics covered include nanotechnology, solar cell technology, biomedical and clinical applications, electronic materials, sustainability, and clean technologies. The book bridges materials science, industrial chemistry, physics, and engineering, making it a must have for researchers in industry and academia, as well as those working on application-oriented plasma technologies. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Electron Ion Plasma Modification of a Hypoeutectoid Al Si Alloy written by Dmitrii Zaguliaev and published by CRC Press. This book was released on 2020-09-27 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron-Ion-Plasma Modification of a Hypereutectic Al-Si Alloy details theoretical and experimental research and computer simulation of structural phase transformations in AlSi10Mn2Ni Silumin on different scale levels under electroexplosion alloying, electron beam processing and electron-plasma alloying at the nanolevel in order to create new materials. The authors summarize and analyze more than 10 years of research on the electron-ion-plasma effect on strength properties and structure-phase states’ transformations of hypoeutectic Silumin. Key Features: Details physical and mathematical models of mechanisms of surface layer hardening under conditions of varying energy effects Offers insights into improved strength characteristics of Silumin Explores optimal processing modes for increased strength and improved tribological characteristics This book is a valuable resource to researchers and engineers involved with the modification of light alloy surfaces for the automotive and aeronautical industry.

Download or read book Polymers Opportunities and Risks I written by Peter Eyerer and published by Springer. This book was released on 2010-08-06 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their first industrial use polymers have gained a tremendous success. The two volumes of "Polymers - Opportunities and Risks" elaborate on both their potentials and on the impact on the environment arising from their production and applications. Volume 11 "Polymers - Opportunities and Risks I: General and Environmental Aspects" is dedicated to the basics of the engineering of polymers – always with a view to possible environmental implications. Topics include: materials, processing, designing, surfaces, the utilization phase, recycling, and depositing. Volume 12 "Polymers - Opportunities and Risks II: Sustainability, Product Design and Processing" highlights raw materials and renewable polymers, sustainability, additives for manufacture and processing, melt modification, biodegradation, adhesive technologies, and solar applications. All contributions were written by leading experts with substantial practical experience in their fields. They are an invaluable source of information not only for scientists, but also for environmental managers and decision makers.

Download or read book Advanced Surfaces for Stem Cell Research written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2016-11-29 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book outlines first the importance of Extra Cellular Matrix (ECM), which is a natural surface for most of cells. In the following chapters the influence of biological, chemical, mechanical, and physical properties of surfaces in micro and nano-scale on stem cell behavior are discussed including the mechanotransduction. Biomimetic and bioinspired approaches are highlighted for developing microenvironment of several tissues, and surface engineering applications are discussed in tissue engineering, regenerative medicine and different type of biomaterials in various chapters of the book. This book brings together innovative methodologies and strategies adopted in the research and development of Advanced Surfaces in Stem Cell Research. Well-known worldwide researchers deliberate subjects including: Extracellular matrix proteins for stem cell fate The superficial mechanical and physical properties of matrix microenvironment as stem cell fate regulator Effects of mechanotransduction on stem cell behavior Modulation of stem cells behavior through bioactive surfaces Influence of controlled micro and nanoengineered surfaces on stem cell fate Nanostructured polymeric surfaces for stem cells Laser surface modification techniques and stem cells applications Plasma polymer deposition: a versatile tool for stem cell research Application of bioreactor concept and modeling techniques in bone regeneration and augmentation treatments Substrates and surfaces for control of pluripotent stem cell fate and function Application of biopolymer-based, surface modified devices in transplant medicine and tissue engineering Silk as a natural biopolymer for tissue engineering

Download or read book Advanced Engineering and Materials written by Wen Jin and published by Trans Tech Publications Ltd. This book was released on 2013-02-13 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 International Conference on Mechanical Engineering and Materials (ICMEM 2013), January 27-28, 2013, Sanya, China. The papers are grouped as follows: Chapter 1: Advanced Material Science and Engineering, Material Processing and Manufacturing Technology; Chapter 2: Applied Mechanics and Mechanical Engineering; Chapter 3: Manufacturing Engineering, Design, Modeling and Simulation in Manufacture and Industry; Chapter 4: Control and Automation, Applications of Tracking and Information Technologies.

Download or read book Photoenergy and Thin Film Materials written by Xiao-Yu Yang and published by John Wiley & Sons. This book was released on 2019-03-19 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest research & developments and future trends in photoenergy and thin film materials—two important areas that have the potential to spearhead the future of the industry. Photoenergy materials are expected to be a next generation class of materials to provide secure, safe, sustainable and affordable energy. Photoenergy devices are known to convert the sunlight into electricity. These types of devices are simple in design with a major advantage as they are stand-alone systems able to provide megawatts of power. They have been applied as a power source for solar home systems, remote buildings, water pumping, megawatt scale power plants, satellites, communications, and space vehicles. With such a list of enormous applications, the demand for photoenergy devices is growing every year. On the other hand, thin films coating, which can be defined as the barriers of surface science, the fields of materials science and applied physics are progressing as a unified discipline of scientific industry. A thin film can be termed as a very fine, or thin layer of material coated on a particular surface, that can be in the range of a nanometer in thickness to several micrometers in size. Thin films are applied in numerous areas ranging from protection purposes to electronic semiconductor devices. The 16 chapters in this volume, all written by subject matter experts, demonstrate the claim that both photoenergy and thin film materials have the potential to be the future of industry.

Download or read book Ferrite Nanostructured Magnetic Materials written by Jitendra Pal Singh and published by Woodhead Publishing. This book was released on 2023-04-28 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferrite Nanostructured Magnetic Materials: Technologies and Applications provides detailed descriptions of the physical properties of ferrite nanoparticles and thin films. Synthesis methods and their applications in numerous fields are also included. And, since characterization methods play an important role in investigating the materials’ phenomena, various characterization tools applied to ferrite materials are also discussed. To meet the requirements of next-generation characterization tools in the field of ferrite research, synchrotron radiation-based spectroscopic and imaging tools are thoroughly explored.Finally, the book discusses current and emerging applications of ferrite nanostructured materials in industry, health, catalytic and environmental fields, making this comprehensive resource suitable for researchers and practitioners in the disciplines of materials science and engineering, chemistry and physics. Reviews the fundamentals of ferrite materials, including their magnetic, electrical, dielectric and optical properties Includes discussions on the most relevant and emerging synthesis and optimization of ferrite nanostructured materials for a diverse range of morphologies Provides an overview of both the most relevant and emerging applications of ferrite magnetic materials in industry, health, energy and environmental remediation

Download or read book Physico chemical Aspects of Textile Coloration written by Stephen M. Burkinshaw and published by John Wiley & Sons. This book was released on 2015-11-30 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of textile materials comprises a very large and complex global industry that utilises a diverse range of fibre types and creates a variety of textile products. As the great majority of such products are coloured, predominantly using aqueous dyeing processes, the coloration of textiles is a large-scale global business in which complex procedures are used to apply different types of dye to the various types of textile material. The development of such dyeing processes is the result of substantial research activity, undertaken over many decades, into the physico-chemical aspects of dye adsorption and the establishment of ‘dyeing theory’, which seeks to describe the mechanism by which dyes interact with textile fibres. Physico-Chemical Aspects of Textile Coloration provides a comprehensive treatment of the physical chemistry involved in the dyeing of the major types of natural, man-made and synthetic fibres with the principal types of dye. The book covers: fundamental aspects of the physical and chemical structure of both fibres and dyes, together with the structure and properties of water, in relation to dyeing; dyeing as an area of study as well as the terminology employed in dyeing technology and science; contemporary views of intermolecular forces and the nature of the interactions that can occur between dyes and fibres at a molecular level; fundamental principles involved in dyeing theory, as represented by the thermodynamics and kinetics of dye sorption; detailed accounts of the mechanism of dyeing that applies to cotton (and other cellulosic fibres), polyester, polyamide, wool, polyacrylonitrile and silk fibres; non-aqueous dyeing, as represented by the use of air, organic solvents and supercritical CO2 fluid as alternatives to water as application medium. The up-to-date text is supported by a large number of tables, figures and illustrations as well as footnotes and widespread use of references to published work. The book is essential reading for students, teachers, researchers and professionals involved in textile coloration.

Download or read book Microstructure and Properties of Micro and Nanoscale Materials Films and Coatings NAP 2019 written by Alexander D. Pogrebnjak and published by Springer Nature. This book was released on 2020-01-28 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the findings of experimental and theoretical (including first-principles molecular dynamics simulation) studies of nanostructured and nanocomposite metal-based materials, and nanoscale multilayer coatings fabricated by physical or chemical vapor deposition, magnetron sputtering, electrospark alloying, ionic layer absorption, contact melting, and high-current electron beam irradiation. It also discusses novel methods of nanocomposite formation, as well as the structure of the deposited films, coatings and other nanoscale materials, their elemental and phase composition, and their physical–mechanical, tribological, magnetic and electrical properties. Lastly, it explores the influence of a various surface modification methods, such as thermal annealing, pulsed laser modification, and thermomechanical and ultrasonic treatment, as well as different properties of nanostructured films.

Download or read book Design Fabrication and Characterization of Multifunctional Nanomaterials written by Sabu Thomas and published by Elsevier. This book was released on 2021-11-24 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, Fabrication, and Characterization of Multifunctional Nanomaterials covers major techniques for the design, synthesis, and development of multifunctional nanomaterials. The chapters highlight the main characterization techniques, including X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, and scanning probe microscopy.The book explores major synthesis methods and functional studies, including: Brillouin spectroscopy; Temperature-dependent Raman spectroscopic studies; Magnetic, ferroelectric, and magneto-electric coupling analysis; Organ-on-a-chip methods for testing nanomaterials; Magnetron sputtering techniques; Pulsed laser deposition techniques; Positron annihilation spectroscopy to prove defects in nanomaterials; Electroanalytic techniques. This is an important reference source for materials science students, scientists, and engineers who are looking to increase their understanding of design and fabrication techniques for a range of multifunctional nanomaterials. Explains the major design and fabrication techniques and processes for a range of multifunctional nanomaterials; Demonstrates the design and development of magnetic, ferroelectric, multiferroic, and carbon nanomaterials for electronic applications, energy generation, and storage; Green synthesis techniques and the development of nanofibers and thin films are also emphasized.

Download or read book Handbook of Structural Life Assessment written by Raouf A. Ibrahim and published by John Wiley & Sons. This book was released on 2017-03-29 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important, self-contained reference deals with structural life assessment (SLA) and structural health monitoring (SHM) in a combined form. SLA periodically evaluates the state and condition of a structural system and provides recommendations for possible maintenance actions or the end of structural service life. It is a diversified field and relies on the theories of fracture mechanics, fatigue damage process, and reliability theory. For common structures, their life assessment is not only governed by the theory of fracture mechanics and fatigue damage process, but by other factors such as corrosion, grounding, and sudden collision. On the other hand, SHM deals with the detection, prediction, and location of crack development online. Both SLA and SHM are combined in a unified and coherent treatment.