Download or read book Materials Structures and Manufacturing for Aircraft written by Melih Cemal Kuşhan and published by Springer Nature. This book was released on 2022-04-25 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive look at materials science topics in aerospace, air vehicle structures and manufacturing methods for aerospace products, examining recent trends and new technological developments. Coverage includes additive manufacturing, advanced material removal operations, novel wing systems, design of landing gear, eco-friendly aero-engines, and light alloys, advanced polymers, composite materials and smart materials for structural components. Case studies and coverage of practical applications demonstrate how these technologies are being successfully deployed. Materials, Structures & Manufacturing for Aircraft will appeal to a broad readership in the aviation community, including students, engineers, scientists, and researchers, as a reference source for material science and modern production techniques.

Download or read book Composite Materials for Aircraft Structures written by Alan A. Baker and published by AIAA. This book was released on 2004 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Aerospace Materials written by Adrian P Mouritz and published by Elsevier. This book was released on 2012-05-23 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The structural materials used in airframe and propulsion systems influence the cost, performance and safety of aircraft, and an understanding of the wide range of materials used and the issues surrounding them is essential for the student of aerospace engineering.Introduction to aerospace materials reviews the main structural and engine materials used in aircraft, helicopters and spacecraft in terms of their production, properties, performance and applications. The first three chapters of the book introduce the reader to the range of aerospace materials, focusing on recent developments and requirements. Following these introductory chapters, the book moves on to discuss the properties and production of metals for aerospace structures, including chapters covering strengthening of metal alloys, mechanical testing, and casting, processing and machining of aerospace metals. The next ten chapters look in depth at individual metals including aluminium, titanium, magnesium, steel and superalloys, as well as the properties and processing of polymers, composites and wood. Chapters on performance issues such as fracture, fatigue and corrosion precede a chapter focusing on inspection and structural health monitoring of aerospace materials. Disposal/recycling and materials selection are covered in the final two chapters. With its comprehensive coverage of the main issues surrounding structural aerospace materials,Introduction to aerospace materials is essential reading for undergraduate students studying aerospace and aeronautical engineering. It will also be a valuable resource for postgraduate students and practising aerospace engineers. Reviews the main structural and engine materials used in aircraft, helicopters and space craft in terms of their properties, performance and applications Introduces the reader to the range of aerospace materials, focusing on recent developments and requirements, and discusses the properties and production of metals for aerospace structures Chapters look in depth at individual metals including aluminium, titanium, magnesium, steel and superalloys

Download or read book Aerospace Structures and Materials written by Yucheng Liu and published by Bentham Science Publishers. This book was released on 2016-10-07 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive volume presents a wide spectrum of information about the design, analysis and manufacturing of aerospace structures and materials. Readers will find an interesting compilation of reviews covering several topics such as structural dynamics and impact simulation, acoustic and vibration testing and analysis, fatigue analysis and life optimization, reversing design methodology, non-destructive evaluation, remotely piloted helicopters, surface enhancement of aerospace alloys, manufacturing of metal matrix composites, applications of carbon nanotubes in aircraft material design, carbon fiber reinforcements, variable stiffness composites, aircraft material selection, and much more. This volume is a key reference for graduates undertaking advanced courses in materials science and aeronautical engineering as well as researchers and professional engineers seeking to increase their understanding of aircraft material selection and design.

Download or read book Aeronautical Technologies for the Twenty First Century written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared at the request of NASA, Aeronautical Technologies for the Twenty-First Century presents steps to help prevent the erosion of U.S. dominance in the global aeronautics market. The book recommends the immediate expansion of research on advanced aircraft that travel at subsonic speeds and research on designs that will meet expected future demands for supersonic and short-haul aircraft, including helicopters, commuter aircraft, "tiltrotor," and other advanced vehicle designs. These recommendations are intended to address the needs of improved aircraft performance, greater capacity to handle passengers and cargo, lower cost and increased convenience of air travel, greater aircraft and air traffic management system safety, and reduced environmental impacts.

Download or read book Manufacturing Technology for Aerospace Structural Materials written by Flake C Campbell Jr and published by Elsevier. This book was released on 2011-08-31 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly-expanding aerospace industry is a prime developer and user of advanced metallic and composite materials in its many products. This book concentrates on the manufacturing technology necessary to fabricate and assemble these materials into useful and effective structural components. Detailed chapters are dedicated to each key metal or alloy used in the industry, including aluminum, magnesium, beryllium, titanium, high strength steels, and superalloys. In addition the book deals with composites, adhesive bonding and presents the essentials of structural assembly. This book will be an important resource for all those involved in aerospace design and construction, materials science and engineering, as well as for metallurgists and those working in related sectors such as the automotive and mass transport industries. Flake Campbell Jr has over thirty seven years experience in the aerospace industry and is currently Senior Technical Fellow at the Boeing Phantom Works in Missouri, USA. * All major aerospace structural materials covered: metals and composites * Focus on details of manufacture and use * Author has huge experience in aerospace industry * A must-have book for materials engineers, design and structural engineers, metallurgical engineers and manufacturers for the aerospace industry

Download or read book High Performance Materials in Aerospace written by Harvey M. Flower and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerospace presents an extremely challenging environment for structural materials and the development of new, or improved, materials: processes for material and for component production are the subject of continuous research activity. It is in the nature of high performance materials that the steps of material and of component production should not be considered in isolation from one another. Indeed, in some cases, the very process of material production may also incorporate part or all of the component production itself and, at the very least, will influence the choice of material/component production method to be employed. How ever, the developments currently taking place are to be discovered largely within the confines of specialist conferences or books each dedicated to perhaps a single element of the overall process. In this book contributors, experts drawn from both academia and the aerospace industry, have joined together to combine their individual knowledge to examine high performance aerospace materials in terms of their production, structure, properties and applications. The central interrelationships between the development of structure through the production route and between structure and the properties exhibited in the final component are considered. It is hoped that the book will be of interest to students of aeronautical engineering and of materials science, together with those working within the aerospace industry. Harvey M. Flower Imperial College 1 Design requirements for aerospace structural materials C. J. Peel and P. J. Gregson 1.

Download or read book New Materials for Next Generation Commercial Transports written by Committee on New Materials for Advanced Civil Aircraft and published by National Academies Press. This book was released on 1996-03-29 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future civil aircraft throughout their service life. The committee investigated the new materials and structural concepts that are likely to be incorporated into next generation commercial aircraft and the factors influencing application decisions. Based on these predictions, the committee attempted to identify the design, characterization, monitoring, and maintenance issues that are critical for the introduction of advanced materials and structural concepts into future aircraft.

Download or read book Aircraft Materials and Analysis written by Tariq Siddiqui and published by McGraw Hill Professional. This book was released on 2014-12-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete coverage of aircraft design, manufacturing, and maintenance Aircraft Materials and Analysis addresses aircraft design, mechanical and structural factors in aviation, flight loads, structural integrity, stresses, properties of materials, compression, bending, and aircraft fatigue. Detailed analysis of the failure process is provided. This authoritative guide examines materials used in aircraft construction such as aluminum, steel, glass, composite, rubber, and carbon fiber. Maintenance procedures for corrosion and aging aircraft are discussed and methods of inspection such as nondestructive testing and nondestructive inspection are described. Accident investigation case studies review aircraft design, material behavior, NTSB findings, safety, stress factors, and human factor involvement. End-of-chapter questions reinforce the topics covered in this practical resource. Aircraft Materials and Analysis covers: The aircraft--standards for design, structural integrity, and system safety Aircraft materials Loads on the aircraft Stress analysis Torsion, compression, and bending loads Aircraft riveted joints and pressure vessels Heat treatments of metals Aircraft fatigue/aircraft material fatigue Aircraft corrosion Dynamic stress, temperature stress, and experimental methods Composites Nondestructive Testing (NDT) Aviation maintenance management Case studies and human factors

Download or read book Revolutionizing Aircraft Materials and Processes written by Spiros Pantelakis and published by Springer. This book was released on 2021-03-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the emerging needs of the aerospace industry by discussing recent developments and future trends of aeronautic materials. It is aimed at advancing existing materials and fostering the ability to develop novel materials with less weight, increased mechanical properties, more functionality, diverse manufacturing methods, and recyclability. The development of novel materials and multifunctional materials has helped to increase efficiency and safety, reduce costs, and decrease the environmental foot print of the aeronautical industry. In this book, integral metallic structures designed by disruptive concepts, including topology optimization and additive manufacturing, are highlighted.

Download or read book Tooling for Composite Aerospace Structures written by Zeaid Hasan and published by Butterworth-Heinemann. This book was released on 2020-07-03 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tooling for Composite Aerospace Structures: Manufacturing and Applications offers a comprehensive discussion on the design, analysis, manufacturing and operation of tooling that is used in the lamination of composite materials and assembly. Chapters cover general topics, the materials that are typically used for tooling, design aspects and recommendations on how to approach the design, and what engineers need to consider, including examples of designs and their pros and cons, how to perform these type of details, and the methods of inspection needed to ensure quality control. The book concludes with an outlook on the industry and the future. Covers the entire lifecycle of tool design, starting with a discussion on composite materials and ending with new concepts and material Introduces aspects of how to use modeling and simulation for tooling with detailed examples and validation data Offers a list of materials and where they should be used depending on the application

Download or read book Additive Manufacturing of Aerospace Composite Structures written by Rani Elhajjar and published by SAE International. This book was released on 2017-05-20 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Aerospace Composite Structures: Fabrication and Reliability introduces the reader to the current state of technologies involved in processing and design of polymer-reinforced fiber composites using additive manufacturing's automated fiber placement methods, through ten seminal SAE International papers. Currently, the material layup strategy in terms of process selection and manufacturability is usually not prioritized in the design phase. Engineers do not have a good way to see how their design choices can affect the manufacturing process beyond their initial structural-level considerations. The result is typically a large amount of experimental testing necessary to qualify the materials and structures typified in the classical building-block approach. Such an environment makes mistakes difficult to solve and, should redesign be required, obtaining reliable information is hard to piece together. Additive Manufacturing of Aerospace Composite Structures: Fabrication and Reliability approaches the question of quality in these structures from a hands-on, solution-driven perspective.

Download or read book Aerospace Materials and Material Technologies written by N. Eswara Prasad and published by Springer. This book was released on 2016-11-11 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.

Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. Provides information on a broad range of materials and processes used in additive manufacturing Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry Covers a wide array of materials for use in the additive manufacturing of aerospace parts Discusses current standards in the area of aerospace AM parts

Download or read book Revolutionizing Aircraft Materials and Processes written by Spiros Pantelakis and published by Springer Nature. This book was released on 2020-03-11 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the emerging needs of the aerospace industry by discussing recent developments and future trends of aeronautic materials. It is aimed at advancing existing materials and fostering the ability to develop novel materials with less weight, increased mechanical properties, more functionality, diverse manufacturing methods, and recyclability. The development of novel materials and multifunctional materials has helped to increase efficiency and safety, reduce costs, and decrease the environmental foot print of the aeronautical industry. In this book, integral metallic structures designed by disruptive concepts, including topology optimization and additive manufacturing, are highlighted.

Download or read book Polymer Composites in the Aerospace Industry written by P. E. Irving and published by Elsevier. This book was released on 2014-09-17 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer composites are increasingly used in aerospace applications due to properties such as strength and durability compared to weight. Edited by two leading authorities in the field, this book summarises key recent research on design, manufacture and performance of composite components for aerospace structures. Part one reviews the design and manufacture of different types of composite component. Part two discusses aspects of performance such as stiffness, strength, fatigue, impact and blast behaviour, response to temperature and humidity as well as non-destructive testing and monitoring techniques.

Download or read book Composite Materials in Aircraft Structures written by Don H. Middleton and published by John Wiley & Sons. This book was released on 1990 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers on composite materials in aircraft structures. The topics covered range from micromechanics and the properties of fibre composites, to advanced composite tooling and manufacturing methods.