Download or read book Materials Selection Deskbook written by Nicholas P. Cheremisinoff and published by William Andrew. This book was released on 1996-12-31 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemical and allied industries employ a multitude of unit operations in product manufacturing. Both chemicals and physical mechanisms are employed in these operations, ranging from simple bulk handling and preparation of chemical feedstocks to complex chemical reactions in the presence of heat and or mass transfer. These operations require application of scientific and engineering principles to ensure efficient, safe and economical process operations. To meet these objectives, process equipment must perform intended functions under actual operating conditions and do so in a continuous and reliable manner. Equipment must have the characteristics of mechanical reliability, which includes strength, rigidity, durability and tightness. In addition, it must be designed at an optimized ratio of capital investment to service life. This book is designed as a handy desk reference covering fundamental engineering principles of project planning schemes and layout, corrosion principles and materials properties of engineering importance. It is intended as a general source of typical materials property data, useful for first pass materials selection in process design problems.
Download or read book Franchise Desk Book written by W. Michael Garner and published by American Bar Association. This book was released on 2001 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: Franchise Desk Book is your primary reference to the text of generally applicable franchise registration, disclosure and relationship statutes and accompanying regulations. You'll benefit from the expert commentary on franchise statutes and cases that provide you with a look behind the scenes with respect to the covered state's laws. In addition, this manual includes annotations of reported and unreported cases that are arranged and keyed to topics that franchise lawyers need and can understand, such as franchise fees, exemptions from registration and more. The unique annotation system that is designed specially for franchise lawyers will allow you to put your finger on cases that focus upon the issues that matter most.
Download or read book Selection of Engineering Materials written by and published by Al Manhal. This book was released on 2011-01-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: A key objective of any design is to define the dimensions of a component and the materials from which it is made so that it can perform a function acceptably. Materials selection ultimately depends upon the performance criteria of the product that usually includes aesthetics and cost effectiveness. Analyzing how a material is expected to perform with respect to requirements such as mechanical, electrical, and chemical requirements can be essential to the selection process. The design engineer translates product requirements into material properties. Characteristics and properties of materials that correlate with performances are referred to as engineering properties.
Download or read book Handbook of Highly Toxic Materials Handling and Management written by Stanley S. Grossel and published by CRC Press. This book was released on 1994-12-13 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides practical, technological information on the toxicological aspects of dangerously hazardous chemicals, the design and maintenance of facilities for processing them, as well as preventive and mitigative procedures for controlling their accidental release. Key areas of industrial toxicology, including major routes of occupational exposure, and general toxic properties of selected chemicals, are discussed.
Download or read book Model Rules of Professional Conduct written by American Bar Association. House of Delegates and published by American Bar Association. This book was released on 2007 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Model Rules of Professional Conduct provides an up-to-date resource for information on legal ethics. Federal, state and local courts in all jurisdictions look to the Rules for guidance in solving lawyer malpractice cases, disciplinary actions, disqualification issues, sanctions questions and much more. In this volume, black-letter Rules of Professional Conduct are followed by numbered Comments that explain each Rule's purpose and provide suggestions for its practical application. The Rules will help you identify proper conduct in a variety of given situations, review those instances where discretionary action is possible, and define the nature of the relationship between you and your clients, colleagues and the courts.
Download or read book Franchise Desk Book Selected State Laws Commentary and Annotations Second Edition written by W. Michael Garner and published by American Bar Association. This book was released on with total page 1628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Science and Engineering Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2017-01-11 with total page 1837 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and study of materials is a pivotal component to new discoveries in the various fields of science and technology. By better understanding the components and structures of materials, researchers can increase its applications across different industries. Materials Science and Engineering: Concepts, Methodologies, Tools, and Applications is a compendium of the latest academic material on investigations, technologies, and techniques pertaining to analyzing the synthesis and design of new materials. Through its broad and extensive coverage on a variety of crucial topics, such as nanomaterials, biomaterials, and relevant computational methods, this multi-volume work is an essential reference source for engineers, academics, researchers, students, professionals, and practitioners seeking innovative perspectives in the field of materials science and engineering.
Download or read book Comprehensive Materials Finishing written by M.S.J. Hashmi and published by Elsevier. This book was released on 2016-08-29 with total page 1467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finish Manufacturing Processes are those final stage processing techniques which are deployed to bring a product to readiness for marketing and putting in service. Over recent decades a number of finish manufacturing processes have been newly developed by researchers and technologists. Many of these developments have been reported and illustrated in existing literature in a piecemeal manner or in relation only to specific applications. For the first time, Comprehensive Materials Finishing, Three Volume Set integrates a wide body of this knowledge and understanding into a single, comprehensive work. Containing a mixture of review articles, case studies and research findings resulting from R & D activities in industrial and academic domains, this reference work focuses on how some finish manufacturing processes are advantageous for a broad range of technologies. These include applicability, energy and technological costs as well as practicability of implementation. The work covers a wide range of materials such as ferrous, non-ferrous and polymeric materials. There are three main distinct types of finishing processes: Surface Treatment by which the properties of the material are modified without generally changing the physical dimensions of the surface; Finish Machining Processes by which a small layer of material is removed from the surface by various machining processes to render improved surface characteristics; and Surface Coating Processes by which the surface properties are improved by adding fine layer(s) of materials with superior surface characteristics. Each of these primary finishing processes is presented in its own volume for ease of use, making Comprehensive Materials Finishing an essential reference source for researchers and professionals at all career stages in academia and industry. Provides an interdisciplinary focus, allowing readers to become familiar with the broad range of uses for materials finishing Brings together all known research in materials finishing in a single reference for the first time Includes case studies that illustrate theory and show how it is applied in practice
Download or read book Information Sources in Engineering written by Roderick A. Macleod and published by Walter de Gruyter GmbH & Co KG. This book was released on 2012-04-17 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current, thoroughly revised and updated edition of this approved title, evaluates information sources in the field of technology. It provides the reader not only with information of primary and secondary sources, but also analyses the details of information from all the important technical fields, including environmental technology, biotechnology, aviation and defence, nanotechnology, industrial design, material science, security and health care in the workplace, as well as aspects of the fields of chemistry, electro technology and mechanical engineering. The sources of information presented also contain publications available in printed and electronic form, such as books, journals, electronic magazines, technical reports, dissertations, scientific reports, articles from conferences, meetings and symposiums, patents and patent information, technical standards, products, electronic full text services, abstract and indexing services, bibliographies, reviews, internet sources, reference works and publications of professional associations. Information Sources in Engineering is aimed at librarians and information scientists in technical fields as well as non-professional information specialists, who have to provide information about technical issues. Furthermore, this title is of great value to students and people with technical professions.
Download or read book Handbook of International Electrical Safety Practices written by Princeton Energy Resources International and published by John Wiley & Sons. This book was released on 2011-01-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable and comprehensive safety reference for any organization working with or around electricity. This comprehensive guide informs working professionals in multiple industries, such as manufacturing, processing, or energy, about safety procedures that should be used on the job. It informs the reader about the hazards in the work place and what to do to make sure he/she is protected. The Handbook of International Electrical Safety Practices presents readers with the proper organizational skills needed to avoid hazardous injuries, details environmental monitoring techniques, and discusses how to ensure that proper protection is used on the job. The authors cover not only obvious electrical safety considerations, such as exposed wires and evacuation plans, but everything related to electrical safety, such as air quality, sound level, and radiation. This reference provides the most comprehensive coverage for any company to keep employees informed and to keep their work environment safe. The Handbook of International Electrical Safety Practices: Contains working plans and templates for evaluating safety proceduresand conditions in the plant Covers common hazards and how to avoid them, such as radiation, noise, air quality, fire, and electric shock Gives a comprehensive view of workers' rights and international regulations Goes beyond regulations and laws to provide a workable blueprint for creating a safe industrial environment
Download or read book Chemical Resistance of Engineering Thermoplastics written by Erwin Baur and published by William Andrew. This book was released on 2016-07-22 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Resistance of Engineering Thermoplastics provides a comprehensive, cross-referenced compilation of chemical resistance data that explains the effect of thousands of reagents, the environment, and other exposure media on the properties and characteristics of engineering thermoplastics – plastics which are generally used in higher performance applications. A huge range of exposure media are included, from aircraft fuel to alcohol, corn syrup to hydrochloric acid, and salt to silver acetate. This information has been substantially updated, curated, and organized by the engineers at M-Base Engineering + Software, a leading supplier of material databases, material information systems, product information systems, and material related simulation software. This book is a must-have reference for engineers and scientists who are designing and working with plastics and elastomers in environments where they come into contact with corrosive or reactive substances, from food, pharmaceuticals, and medical devices to the automotive, aerospace, and semiconductor industries. - Explains the effect of thousands of reagents, the environment, and other exposure media on the properties and characteristics of engineering thermoplastics - Substantially updated, curated, and organized by the engineers at M-Base Engineering + Software, a leading supplier of material databases and material information systems - Provides a comprehensive, cross-referenced compilation of chemical resistance data
Download or read book Chemical Resistance of Commodity Thermoplastics written by Erwin Baur and published by William Andrew. This book was released on 2016-07-22 with total page 1192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Resistance of Commodity Thermoplastics provides a comprehensive, cross-referenced compilation of chemical resistance data that explains the effect of thousands of reagents, the environment and other exposure media on the properties and characteristics of commodity thermoplastics – plastics which are generally used in higher performance applications. A huge range of exposure media are included, from aircraft fuel to alcohol, corn syrup to hydrochloric acid, and salt to silver acetate. This information has been substantially updated, curated, and organized by the engineers at M-Base Engineering + Software, a leading supplier of material databases, material information systems, product information systems, and material related simulation software. This book is a must-have reference for engineers and scientists designing and working with plastics and elastomers in environments where they come into contact with corrosive or reactive substances, from food, pharmaceuticals, and medical devices, to the automotive, aerospace, and semiconductor industries. - Explains the effect of thousands of reagents, the environment and other exposure media on the properties and characteristics of commodity thermoplastics - Organized by the engineers at M-Base Engineering + Software, a leading supplier of material databases, material information systems, product information systems, and material related simulation software - A must-have reference for engineers and scientists designing and working with plastics and elastomers in environments where they come into contact with corrosive or reactive substances
Download or read book Heat Exchanger Design Handbook written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2000-02-23 with total page 1142 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This comprehensive reference covers all the important aspects of heat exchangers (HEs)--their design and modes of operation--and practical, large-scale applications in process, power, petroleum, transport, air conditioning, refrigeration, cryogenics, heat recovery, energy, and other industries. Reflecting the author's extensive practical experienc
Download or read book Virginia School Law Deskbook written by and published by . This book was released on 2007 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Legislative Drafter s Deskbook written by Tobias A. Dorsey and published by TheCapitol.Net Inc. This book was released on 2006 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Legislative Drafter's Deskbook offers practical advice and insight for those engaged in legislative drafting, those more interested in policy than drafting itself, or those interested in reading and interpreting the law. The Legislative Drafter's Deskbook helps anyone understand why laws are drafted the way they are. This book explains why laws are drafted the way they are. Legislative drafting is - to the extent it is writing at all - the form of writing used for legislative measures, a category that covers original bills and resolutions as well as amendments. Ultimately, legislative drafting is the form of writing used for enacted law. The focus of this book is on legislative drafting for the Congress of the United States, but many, if not most, of the principles described here apply just as well to drafting for other legislatures. As forms of writing go, drafting is not freewheeling like poetry, nor showy like rhetoric, nor personal like a novel. Drafting is disciplined, rigorous, and analytical. Done well, drafting can also be creative, elegant, and clever. (Unfortunately, drafting is not always done well.) The purpose of this book is to provide practical advice on drafting to anyone who does, or may, engage in drafting, and indirectly to provide insight into the drafting process to other interested people. For example, this book is for people who are more interested in policy than in drafting, but want to understand why drafters operate the way they do. It is also for people who are more interested in reading and interpreting the law than in drafting, but want to understand why laws are drafted the way they are. It is hoped that this book will be accessible to beginners while remaining valuable to veterans. The traditional method of training drafters is to train them on the job; the consensus is that drafting is best learned holistically, on a case-by-case basis. For that reason this book is best used as a resource, not a course. It is a supplement to, not a substitute for, the learning that comes from experience. The author designed this book to answer the variety of questions about drafting that arise daily in the work of individuals with a professional interest in how bills, resolutions, and laws are drafted. The approach used here is pragmatic: You will find no linguistic theories or esoteric conundrums discussed here. What you will find is solid advice for everyday drafting projects. "A masterful work. It is comprehensive and exceptionally well written. It is an essential tool for anyone who drafts legislation or interprets the law." -- William K. Suter, Clerk of the United States Supreme Court "An essential and indispensable book, both as a reference work and as a thorough introduction to Federal legislative drafting." -- Frank Burk, Legislative Counsel of the United States Senate 1991-1998 "The succinct and thorough assessment of good legislative drafting techniques provides a set of 'best practices' for drafters at all levels of government." -- Elizabeth Garrett, Sydney M. Irmas Professor of Public Interest Law, University of Southern California "State legislative drafters will also greatly appreciate this work." -- Bruce Feustel, Senior Fellow, NCSL Summary of Contents 1. Being a Drafter 2. Understanding How Laws Are Made 3. Considering the Courts: Statutory Interpretation 4. Thinking Through the Policy 5. Choosing the Right Measure 6. Writing Effectively 7. Organizing and Arranging 8. Using the Right Style 9. Affecting and Amending Other Laws 10. Working in, and Working with, the Executive Branch Appendices Back of the Book Table of Cases Table of Constitutional Provisions Table of Statutes at Large Table of Public Laws Table of U.S. Code Sections Index Complete Table of Contents online at www.LegislativeDraftersDeskbook.com
Download or read book Real Estate Closing Deskbook written by K. F. Boackle and published by American Bar Association. This book was released on 2003 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide provides a firm understanding of real estate concepts and explains mechanics of handling a closing.
Download or read book Heat Exchanger Design Handbook Second Edition written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2013-05-20 with total page 1275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated to reflect current advances in heat exchanger technology, Heat Exchanger Design Handbook, Second Edition includes enhanced figures and thermal effectiveness charts, tables, new chapter, and additional topics––all while keeping the qualities that made the first edition a centerpiece of information for practicing engineers, research, engineers, academicians, designers, and manufacturers involved in heat exchange between two or more fluids. See What’s New in the Second Edition: Updated information on pressure vessel codes, manufacturer’s association standards A new chapter on heat exchanger installation, operation, and maintenance practices Classification chapter now includes coverage of scrapped surface-, graphite-, coil wound-, microscale-, and printed circuit heat exchangers Thorough revision of fabrication of shell and tube heat exchangers, heat transfer augmentation methods, fouling control concepts and inclusion of recent advances in PHEs New topics like EMbaffle®, Helixchanger®, and Twistedtube® heat exchanger, feedwater heater, steam surface condenser, rotary regenerators for HVAC applications, CAB brazing and cupro-braze radiators Without proper heat exchanger design, efficiency of cooling/heating system of plants and machineries, industrial processes and energy system can be compromised, and energy wasted. This thoroughly revised handbook offers comprehensive coverage of single-phase heat exchangers—selection, thermal design, mechanical design, corrosion and fouling, FIV, material selection and their fabrication issues, fabrication of heat exchangers, operation, and maintenance of heat exchangers —all in one volume.
