Download or read book Metals and Alloys written by Mark Anthony Benvenuto and published by Walter de Gruyter GmbH & Co KG. This book was released on 2016-06-06 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals and Alloys continues the series of graduate textbooks on Industrial Chemistry by Mark A. Benvenuto. It shows the essential industrial applications, processes and chemistry background for the extraction of metals, as well as the production and applications of alloys. The book discusses how large scale and minor processes affect every-day life, challenges in prevention and removal of waste by-products and illustrates selected chemical processes for which efforts have been made to improve and “green” industrial production of metals and alloys. Sources for metals are sorted by metal and alloy and backed by basic chemical background information and process set up. Overviews on worldwide ore distribution, refined metal and alloy production numbers are another focus of the book. Discusses sources, key processes and applications. Connects what students learn in class to real, large-scale metals chemistry that makes modern life possible. Intended for students, graduate students and beginners in the fiield of Chemistry, Chemical Process Engineering, Chemical Engineering and Materials Science. Visit degruyter.com for more information on books by Mark A. Benvenuto: Industrial Chemistry (2013), Industrial Chemistry: For Advanced Students (2015) and Industrial Inorganic Chemistry (2015). About the Author: Mark Anthony Benvenuto A Fellow of the American Chemical Society, he received his PhD in inorganic chemistry from the University of Virginia. After a post-doctoral fellowship at the Pennsylvania State University, he joined the University of Detroit Mercy, where he is now the Department Chairman and teaches an industrial chemistry course.

Download or read book Aluminum Alloys Contemporary Research and Applications written by A. K. Vasudevan and published by Elsevier. This book was released on 2012-12-02 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the structure and properties of the current and potential aluminum alloys in terms of their structure (and structural transformations by new processing methods) and the relationship between structure and mechanical and other properties. The alternative materials that challenge aluminum are considered as well, since the challenge of new competitive materials is a strong influence on innovation. The book bridges the gap between current scientific understanding and engineering practice. It is an up-to-date reference that will be of use to researchers and advanced students in metallurgy and materials engineering.

Download or read book Solidification and Crystallization Processing in Metals and Alloys written by Hasse Fredriksson and published by John Wiley & Sons. This book was released on 2012-07-02 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solidification and Crystallization Processing in Metals and Alloys Hasse Fredriksson KTH, Royal Institute of Technology, Stockholm, Sweden Ulla Åkerlind University of Stockholm, Sweden Solidification or crystallization occurs when atoms are transformed from the disordered liquid state to the more ordered solid state, and is fundamental to metals processing. Conceived as a companion volume to the earlier works, Materials Processing during Casting (2006) and Physics of Functional Materials (2008), this book analyzes solidification and crystallization processes in depth. Starting from the thermodynamic point of view, it gives a complete description, taking into account kinetics and mass transfer, down to the final structure. Importantly, the book shows the relationship between the theory and the experimental results. Topics covered include: Fundamentals of thermodynamics Properties of interfaces Nucleation Crystal growth - in vapours, liquids and melts Heat transport during solidification processes Solidification structures - faceted, dendritic, eutectic and peritectic Metallic glasses and amorphous alloy melts Solidification and Crystallization Processing in Metals and Alloys features many solved examples in the text, and exercises (with answers) for students. Intended for Masters and PhD students as well as researchers in Materials Science, Engineering, Chemistry and Metallurgy, it is also a valuable resource for engineers in industry.

Download or read book Phase Transformations in Materials written by G. Kostorz and published by Wiley-VCH. This book was released on 2001-10-25 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: For all kinds of materials, phase transformations show common phenomena and mechanisms, and often turn a material, for example metals, multiphase alloys, ceramics or composites, into its technological useful form. The physics and thermodynamics of a transformation from the solid to liquid state or from one crystal form to another are therefore essential for creating high-performance materials. This handbook covers phase transformations, a general phenomenon central to understanding the behavior of materials and for creating high-performance materials. It will be an essential reference for all materials scientists, physicists and engineers involved in the research and development of new high performance materials. It is the revised and enhanced edition of the renowned book edited by the late P. Haasen in 1990 (Vol. 5, Materials Science and Technology).

Download or read book Smithells Metals Reference Book written by William F. Gale and published by Elsevier. This book was released on 2003-12-09 with total page 2072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smithells is the only single volume work which provides data on all key apsects of metallic materials.Smithells has been in continuous publication for over 50 years. This 8th Edition represents a major revision.Four new chapters have been added for this edition. these focus on; * Non conventional and emerging materials - metallic foams, amorphous metals (including bulk metallic glasses), structural intermetallic compounds and micr/nano-scale materials. * Techniques for the modelling and simulation of metallic materials. * Supporting technologies for the processing of metals and alloys.* An Extensive bibliography of selected sources of further metallurgical information, including books, journals, conference series, professional societies, metallurgical databases and specialist search tools.* One of the best known and most trusted sources of reference since its first publication more than 50 years ago* The only single volume containing all the data needed by researchers and professional metallurgists* Fully updated to the latest revisions of international standards

Download or read book The Theory of Transformations in Metals and Alloys written by John Christian and published by Newnes. This book was released on 2002-12-10 with total page 1202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.

Download or read book Science Technology and Applications of Metals in Additive Manufacturing written by Bhaskar Dutta and published by Elsevier. This book was released on 2019-08-15 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, Technology and Applications of Metal Additive Manufacturing provides a holistic picture of metal Additive Manufacturing (AM) that encompasses the science, technology and applications for the use of metal AM. Users will find design aspects, various metal AM technologies commercially available, a focus on merits and demerits, implications for qualification and certification, applications, cost modeling of AM, and future directions. This book serves as an educational guide, providing a holistic picture of metal AM that encompasses science, technology and applications for the real-life use of metal AM. - Includes an overall understanding of metal additive manufacturing, Including steps involved (process flow) - Discusses available commercial metal AM technologies and their relative strengths and weaknesses - Reviews the process of qualification of AM parts, various applications, cost modeling, and the future directions of metal AM

Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Download or read book Alloying written by Joseph R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloying: Understanding the Basics is a comprehensive guide to the influence of alloy additions on mechanical properties, physical properties, corrosion and chemical behavior, and processing and manufacturing characteristics. The coverage considers "alloying" to include any addition of an element or compound that interacts with a base metal to influence properties. Thus, the book addresses the beneficial effects of major alloy additions, inoculants, dopants, grain refiners, and other elements that have been deliberately added to improve performance, as well the detrimental effects of minor elements or residual (tramp) elements included in charge materials or that result from improper melting or refining techniques. The content is presented in a concise, user-friendly format. Numerous figures and tables are provided. The coverage has been weighted to provided the most detailed information on the most industrially important materials.

Download or read book Advances in Processing of Lightweight Metal Alloys and Composites written by R. Vaira Vignesh and published by Springer Nature. This book was released on 2022-11-18 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most important aspects of lightweight metal alloys including history, physical metallurgy, overview of production technologies, alloy development, compositing, post-processing (heat treatment, surface engineering, bulk-deformation), and joining methodologies. It discusses the microstructural evolution, fractography, morphology of corroded and worn surface to enable easy understanding of the mechanism. The topics covered in this book include lightweight metallic materials, instrumental characterization of light weight metal alloys and composites, severe plastic deformation processing of aluminum alloys, solid-state welding of aluminum alloys, aluminum metal matrix composite for automotive and aircraft applications, and heat treatment of aluminum metal matrix composites. The book is highly useful for students, researchers, academicians, scientists, and engineers working on lightweight materials.

Download or read book Refractory Metal Alloys Metallurgy and Technology written by I. Machlin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication documents Proceedings of the Symposium on Metal lurgy and Technology of Refractory Metal Alloys, held in Washington, D.C. at the Washington Hilton Hotel on April 25-26, 1968, under sponsorship of the Refractory Metals Committee, Institute of Metals Division, of the Metallurgical Society of AIME, and the National Aeronautics and Space Administration. The Symposium presented critical reviews of selected topics in refractory metal alloys, thereby contributing to an in-depth understanding of the state-of-the-art, and establishing a base line for further research, development, and application. This Symposium is fifth in a series of conferences on refractory metals, sponsored by the Metallurgical Society of AlME. Publications issuing from the conferences are valuable technical and historical source books, tracing the evolution of refractory metals from early laboratory alloying studies to their present status as useful engineering materials. Refractory metals are arbitrarily defined by melting point. A 0 melting temperature of over 3500 F was selected as the minimum for this Symposium, thus excluding chromium and vanadium, which logically could be treated with other refractory metals in Groups VA and VIA of the periodic table. The Refractory Metals Committee is planning reviews of chromium and vanadium in subsequent conferences.

Download or read book Materials Processing written by Lorraine F. Francis and published by Academic Press. This book was released on 2015-12-28 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Processing is the first textbook to bring the fundamental concepts of materials processing together in a unified approach that highlights the overlap in scientific and engineering principles. It teaches students the key principles involved in the processing of engineering materials, specifically metals, ceramics and polymers, from starting or raw materials through to the final functional forms. Its self-contained approach is based on the state of matter most central to the shaping of the material: melt, solid, powder, dispersion and solution, and vapor. With this approach, students learn processing fundamentals and appreciate the similarities and differences between the materials classes. The book uses a consistent nomenclature that allow for easier comparisons between various materials and processes. Emphasis is on fundamental principles that gives students a strong foundation for understanding processing and manufacturing methods. Development of connections between processing and structure builds on students' existing knowledge of structure-property relationships. Examples of both standard and newer additive manufacturing methods throughout provide students with an overview of the methods that they will likely encounter in their careers. This book is intended primarily for upper-level undergraduates and beginning graduate students in Materials Science and Engineering who are already schooled in the structure and properties of metals, ceramics and polymers, and are ready to apply their knowledge to materials processing. It will also appeal to students from other engineering disciplines who have completed an introductory materials science and engineering course. - Coverage of metal, ceramic and polymer processing in a single text provides a self-contained approach and consistent nomenclature that allow for easier comparisons between various materials and processes - Emphasis on fundamental principles gives students a strong foundation for understanding processing and manufacturing methods - Development of connections between processing and structure builds on students' existing knowledge of structure - property relationships - Examples of both standard and newer additive manufacturing methods throughout provide students with an overview of the methods that they will likely encounter in their careers

Download or read book Fundamentals of Radiation Materials Science written by GARY S. WAS and published by Springer. This book was released on 2016-07-08 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised second edition of this established text offers readers a significantly expanded introduction to the effects of radiation on metals and alloys. It describes the various processes that occur when energetic particles strike a solid, inducing changes to the physical and mechanical properties of the material. Specifically it covers particle interaction with the metals and alloys used in nuclear reactor cores and hence subject to intense radiation fields. It describes the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys. Updated throughout, some major enhancements for the new edition include improved treatment of low- and intermediate-energy elastic collisions and stopping power, expanded sections on molecular dynamics and kinetic Monte Carlo methodologies describing collision cascade evolution, new treatment of the multi-frequency model of diffusion, numerous examples of RIS in austenitic and ferritic-martensitic alloys, expanded treatment of in-cascade defect clustering, cluster evolution, and cluster mobility, new discussion of void behavior near grain boundaries, a new section on ion beam assisted deposition, and reorganization of hardening, creep and fracture of irradiated materials (Chaps 12-14) to provide a smoother and more integrated transition between the topics. The book also contains two new chapters. Chapter 15 focuses on the fundamentals of corrosion and stress corrosion cracking, covering forms of corrosion, corrosion thermodynamics, corrosion kinetics, polarization theory, passivity, crevice corrosion, and stress corrosion cracking. Chapter 16 extends this treatment and considers the effects of irradiation on corrosion and environmentally assisted corrosion, including the effects of irradiation on water chemistry and the mechanisms of irradiation-induced stress corrosion cracking. The book maintains the previous style, concepts are developed systematically and quantitatively, supported by worked examples, references for further reading and end-of-chapter problem sets. Aimed primarily at students of materials sciences and nuclear engineering, the book will also provide a valuable resource for academic and industrial research professionals. Reviews of the first edition: "...nomenclature, problems and separate bibliography at the end of each chapter allow to the reader to reach a straightforward understanding of the subject, part by part. ... this book is very pleasant to read, well documented and can be seen as a very good introduction to the effects of irradiation on matter, or as a good references compilation for experimented readers." - Pauly Nicolas, Physicalia Magazine, Vol. 30 (1), 2008 “The text provides enough fundamental material to explain the science and theory behind radiation effects in solids, but is also written at a high enough level to be useful for professional scientists. Its organization suits a graduate level materials or nuclear science course... the text was written by a noted expert and active researcher in the field of radiation effects in metals, the selection and organization of the material is excellent... may well become a necessary reference for graduate students and researchers in radiation materials science.” - L.M. Dougherty, 07/11/2008, JOM, the Member Journal of The Minerals, Metals and Materials Society.

Download or read book Aluminum Lithium Alloys written by Olga Grushko and published by CRC Press. This book was released on 2016-11-18 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminum–Lithium Alloys: Process Metallurgy, Physical Metallurgy, and Welding provides theoretical foundations of the technological processes for melting, casting, forming, heat treatment, and welding of Al–Li alloys. It contains a critical survey of the research in the field and presents data on commercial Al–Li alloys, their phase composition, microstructure, and heat treatment of the ingots, sheets, forgings, and welds of Al–Li alloys. It details oxidation kinetics, protective alloying, hydrogen in Al–Li alloys, and crack susceptibility. It also discusses grain structure and solidification, as well as structural and mechanical properties. The book is illustrated with examples of Al–Li alloy applications in aircraft structures. Based on the vast experience of the coauthors, the book presents recommendations on solving practical problems involved with melting and casting ingots, welding of Al–Li alloys, and producing massive stampings for welded products. Provides comprehensive coverage of Al–Li alloys, not available in any single source. Presents research that is at the basis of the production technology for of ingots and products made of Al–Li alloys. Combines basic science with applied research, including upscaling and industrial implementation. Covers welding of Al–Li alloys in detail. Discusses gas and alkali-earth impurities in Al–Li alloys. Describes technological recommendations on casting and deformation of Al–Li alloys.

Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.

Download or read book Materials Science and Engineering Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2017-01-11 with total page 1837 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and study of materials is a pivotal component to new discoveries in the various fields of science and technology. By better understanding the components and structures of materials, researchers can increase its applications across different industries. Materials Science and Engineering: Concepts, Methodologies, Tools, and Applications is a compendium of the latest academic material on investigations, technologies, and techniques pertaining to analyzing the synthesis and design of new materials. Through its broad and extensive coverage on a variety of crucial topics, such as nanomaterials, biomaterials, and relevant computational methods, this multi-volume work is an essential reference source for engineers, academics, researchers, students, professionals, and practitioners seeking innovative perspectives in the field of materials science and engineering.

Download or read book Laser Metal Deposition Process of Metals Alloys and Composite Materials written by Rasheedat Modupe Mahamood and published by Springer. This book was released on 2017-09-05 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the industrial potential and explains the physics behind laser metal deposition (LMD) technology. It describes the laser metal deposition (LMD) process with the help of numerous diagrams and photographs of real-world process situations, ranging from the fabrication of parts to the repair of existing products, and includes case studies from current research in this field. Consumer demand is moving away from standardized products to customized ones, and to remain competitive manufacturers require manufacturing processes that are flexible and able to meet consumer demand at low cost and on schedule. Laser metal deposition (LMD) is a promising alternative manufacturing process in this context. This book enables researchers and professionals in industry gain a better understanding of the LMD process, which they can then use in real-world applications. It also helps spur on further innovations.