Download or read book GaN and Related Alloys 2002 Volume 743 written by Materials Research Society. Meeting and published by . This book was released on 2003-06-02 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: This year's nitride symposium showed the scope of nitride-related advances spanning basic materials physics over process technology to high-performance devices. Progress was reported in bulk growth of GaN and AlN, growth on various substrates and substrate orientations, optical properties of InN, defect and doping analysis of p-doped GaN, and polarization properties. These led to new performance records in visible light emitter technology, i.e., higher efficiency/higher brightness, UV emitters with shorter wavelength, and UV and photo detectors. Advances in the development of nitride-based electronic devices with new heterostructure FET designs for RF power applications, including those on Si substrates and wafer fusion, are also reported. This book captures the exciting developments in this rapidly progressing field. Topics include: epitaxy - devices and defect reduction; defects and characterization; epitaxy - nonpolar orientations and alloys; optical properties; UV emitters and detectors; visible light emitters; electronic devices; characterization of defects and transport; and contacts, processing and p-type nitrides.

Download or read book GaN and Related Alloys written by and published by . This book was released on 2003 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solid State Ionics 2002 Volume 756 written by Philippe Knauth and published by . This book was released on 2003-04-17 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.

Download or read book Membranes Volume 752 written by Materials Research Society. Meeting and published by . This book was released on 2003-04-11 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this 2003 volume from the Materials Research Society is twofold - to provide an overview of advances in membrane science and technology and to enhance communication among membrane researchers from a variety of disciplines including chemistry, biology, biotechnology, chemical engineering and materials science. Membranes can be used for inert or reactive separations in a variety of fields including gas purification, water treatment, energy storage and conversion, bio-technology and biomedicine. The book brings together scientists involved in the entire spectrum of modern approaches to membrane science and technology to address synthesis, characterization and transport properties and their use in established and emerging applications. Topics include: membrane synthesis and preparation; surface modification and additives; hybrid and composite membranes; membrane characterization; transport phenomena in membranes; charged membranes and ion transfer; gas permeation and separation; pervaporation and vapor permeation; dense membranes for hydrogen separation; applications in biotechnology and biomedicine; and membrane R&D for industrial and emerging applications.

Download or read book Silicon Carbide 2002 Materials Processing and Devices Volume 742 written by Stephen E. Saddow and published by . This book was released on 2003-03-25 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in silicon carbide materials, processing and device design have recently resulted in implementation of SiC-based electronic systems and offer great promise in high-voltage, high-temperature and high-frequency applications. This volume focuses on new developments in basic science of SiC materials as well as rapidly maturing device technologies. The challenges in this field include understanding and decreasing defect densities in bulk SiC crystals, controlling morphology and residual impurities in epilayers, optimization of implant activation and oxide-SiC interfaces, and developing novel device structures. This book brings together the crystal growers, physicists and device experts needed to continue the rapid pace of silicon-carbide-based technology. Topics include: epitaxial growth; characterization/defects; MOS technology; SiC processing and devices.

Download or read book State of the Art Program on Compound Semiconductors XLI and Nitride and Wide Bandgap Semiconductors for Sensors Photonics and Electronics V written by H. M. Ng and published by The Electrochemical Society. This book was released on 2004 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Novel Materials and Processes for Advanced CMOS Volume 745 written by Mark I. Gardner and published by . This book was released on 2003-03-25 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in MOS integrated-circuit technology is largely driven by the ability to dimensionally scale the constituent components of individual devices and their associated interconnections. Given a set of materials with fixed properties, this scaling is finite and its predicted limits are rapidly approaching. The International Technology Roadmap for Semiconductors establishes the pace at which this scaling occurs and identifies many of the technological challenges ahead. This volume assembles representatives from the fields of materials science, physics, electrical and chemical engineering to provide an insightful review of current technology and understanding. Specifically, the intent is to discuss materials issues stemming from device scaling to sub-100nm technology nodes. Topics include: high-k characterization; atomic layer deposition; gate metal materials and integration; contacts and ultrashallow junction formation; theory and modeling and crystalline oxides for gate dielectrics.

Download or read book Three Dimensional Nanoengineered Assemblies Volume 739 written by T. M. Orlando and published by . This book was released on 2003-06-13 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in nanoscale materials processing are taking place at a rapid pace via myriad paths, including lithography, production of nanoparticle assemblies, surface manipulation and many others. Several of the techniques create structures that are three-dimensional or quasi three-dimensional. Even smaller structures intended to be two-dimensional have a 'more' three-dimensional geometry as their two-dimensional feature size and layer thickness become similar. The properties of these denser assemblies are driving different applications in electronics (single-electron devices), optics (photonic crystals and switches) and elsewhere. This 2003 book provides a venue for a productive scientific and technical exchange. The result is a compilation of papers which address fundamental studies, technological advances and novel approaches to developing and processing three-dimensional nanoscale assemblies. Topics include: nanofabrication via lithographic techniques; unconventional fabrication methods of nano-structures; physics, chemistry and modeling of nanostructures; fabrication and properties of 1D nanostructures; fabrication and properties of 3D nanostructures; applications of nanostructures and devices.

Download or read book Crystalline Oxide Volume 747 written by D. G. Schlom and published by . This book was released on 2003-06-23 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of two symposia held at the 2002 MRS Fall Meeting in Boston. Papers from Symposium T, Crystalline Oxides on Semiconductors, bring together experts from different technology areas - high-k gate dielectrics, novel memories, and ferroelectrics, for example - to examine commonality among the fields. These papers offer an overview of the field, highlight interesting experimental results and device ideas, and feature innovative theoretical approaches to understanding these systems. Symposium V, Interfacial Issues for Oxide-Based Electronics, covers a wide range of topics involving the interfaces between electro-optical oxide layers and other materials. Overall, it is clear that a new generation of materials and heterostructures has been enabled by the increasing control of interfacial phenomena. Topics include: epitaxial oxide-silicon heterostructures; ferroelectric thin films on silicon; theory and modeling; crystalline oxides for gate dielectrics; transparent conducting oxides; transparent conducting oxides and oxide growth and properties; field effect devices and gate dielectrics; ferroelectrics, capacitors and sensors; organic devices and interfacial growth issues.

Download or read book Solid State Chemistry of Inorganic Materials IV Volume 755 written by M. Á. Alario-Franco and published by . This book was released on 2003-08-14 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in the mid-twentieth century, solid-state chemistry has matured within the chemical sciences. In the same way that chemistry itself is considered a central science, solid-state chemistry is central in its many relations to physics, in particular to solid-state physics and also to materials science and engineering. There are few problems in materials science or engineering in which the preparation of the material itself is not a central issue and, more often than not, this will be a solid-state chemical problem. For these reasons, it is not surprising that in the technological development of the last century, solid-state chemistry has grown in importance. It is not only a synthesis science, it is also the science of structures, defects, stoichiometry, and physical chemical properties. Most of these are explored in the book. Topics include: metal-to-insulator transition; porous materials; dielectric materials; nanomaterials; synthesis of materials; films and catalytic materials; CMR materials; thermoelectric materials; dielectrics, catalysts, phosphors, films and properties and synthesis and crystal growth.

Download or read book Defect Properties and Related Phenomena in Intermetallic Alloys Volume 753 written by Materials Research Society. Meeting and published by . This book was released on 2003-06-25 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defects such as dislocations, antiphase domains and grain boundaries, interstitials/substitutionals, and vacancies affect many physical and mechanical properties of ordered intermetallics. As a result, they often play a decisive role in determining the macroscopic behavior of not just structural intermetallics but also 'functional' intermetallics such as shape memory alloys and hydrogen storage materials. This book follows in the general tradition of the highly successful series of MRS symposia titled High-Temperature Ordered Intermetallic Alloys. However, it also represents a significant departure from its predecessors: it includes papers on functional intermetallics in addition to papers on structural intermetallics; and focuses on defects and how they affect various properties of interest in structural and functional intermetallics. Roughly 30 percent of the papers in the book are on functional intermetallics, including materials for hydrogen storage, magnetic, and shape memory applications. The remaining papers deal with structural intermetallics, including the still active areas of nickel-, iron-, and titanium-aluminides, as well as the newer materials for ultrahigh-temperature applications.

Download or read book Mechanical Properties Derived from Nanostructuring Materials written by David F. Bahr and published by . This book was released on 2003 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Magnetoelectronics and Magnetic Materials Novel Phenomena and Advanced Characterization Volume 746 written by Shufeng Zhang and published by . This book was released on 2003-04 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the proceedings of Symposium Q, Magnetoelectronics-Novel Magnetic Phenomena in Nanostructures, and Symposium R, Advanced Characterization of Artificially Structured Magnetic Materials, both from the 2002 MRS Fall Meeting in Boston. The common focus is on artificially engineered nanostructured magnetic systems. The two symposia address new phenomena in magnetoelectronic applications, their preparation, and advanced methodology for characterization. Interest in nanomagnetism has been catalyzed by advances in two fields of research. 1) Advances in materials synthesis of structures whose length scales transcend magnetic length scales and open the possibility for creating materials with new magnetic properties. Such structures include interfaces, superlattices, tunneling devices, nanostructures, and single-molecule magnets. 2) Advances in sample characterization techniques for nano-magnetism which allow detailed exploration of structure-property relationships in nanostructured magnetic systems. The volume highlights current trends in both fields and offers an outlook for further advances and new capabilities.

Download or read book Self assembled Nanostructured Materials written by Yunfeng Lu and published by . This book was released on 2003 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructures with critical dimensions less than 100nm endow materials with unique and often superior mechanical, electronic, magnetic and optical properties, which are expected to lead to numerous advanced applications. The current nanotechnology roadmap focuses on exploration and prediction of novel properties of materials at the nanoscale, of efficient synthesis and manufacture of nanoscale materials, and of the integration of nanoscale materials into real-world devices and applications. Self assembly, in which complex building blocks are organized into hierarchical structures via noncovalent interactions, has emerged as one of the most promising techniques for the efficient fabrication of nanostructured materials. This proceedings volume focuses on synthesis of novel nanostructured materials via self assembly, the fundamental understanding of self-assembly processes, the unique properties of nanostructured materials, and their potential applications. The volume is a compendium of current discussions of these topics with special emphasis on the synthesis and fabrication of nanostructured materials via self assembly of organic molecules such as surfactants and block copolymers, inorganic and metallic nanoclusters, nanoparticles, nanorods, nanowires, and other building blocks. It also contains reports on the novel properties and applications of nanostructured materials.

Download or read book Materials Inspired by Biology written by James L. Thomas (Ph. D.) and published by . This book was released on 2003 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continued interest in the field of biologically inspired materials is strongly motivated by the fact that the nanoscale and microscale organization found in biological materials often leads to exceptional macroscopic materials properties. The ability to mimic these structures should lead to new synthetic materials with similarly remarkable behavior in both biomedical and materials arenas. This has led to an enormous amount of research in a variety of materials areas, including those aimed at: 1) unique ceramics or composites for use in biomaterials, magnetic and optical applications; 2) self-assembled biopolymeric systems for use in biomaterials and biosensor applications; and 3) colloidal and amphiphilic systems for application in biomedicine, nanotechnology and biosensors. Accordingly, this volume brings together a broad range of researchers whose interests span the full breadth of biology, and in addition, those who find different inspiration in biology itself. For some, that inspiration is in the creation of new materials that have important biological (especially biomedical) applications. For others, it is the imitation of the behavior of a biological material, molecule or process that is of interest. Finally, with increasing frequency, researchers are drawing inspiration from the synthetic pathways that biology uses, exploiting these pathways, and modifying them chemically or genetically to make entirely novel molecules and materials. Biologically inspired materials is a rapidly evolving arena of materials science research, and the work presented here reflects recent advances and new perspectives in the field. Topics include: tissue engineering and biomaterials; novel biomimeticand bioinspired polymers; biomineralization, colloidal and templated materials; and amphiphilic membranes and surfaces.

Download or read book Multiscale Phenomena in Materials Experiments and Modeling Related to Mechanical Behavior Volume 779 written by Materials Research Society. Meeting and published by . This book was released on 2003-09-05 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners. This 2003 volume focuses on experimentally validated multiscale modeling of ductile metals and alloys.

Download or read book Solid State Ionics written by and published by . This book was released on 2003 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: