Download or read book Performance of Cement Based Materials in Aggressive Aqueous Environments written by Mark Alexander and published by Springer Science & Business Media. This book was released on 2012-12-18 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete and cement-based materials must operate in increasingly aggressive aqueous environments, which may be either natural or industrial. These materials may suffer degradation in which ion addition and/or ion exchange reactions occur, leading to a breakdown of the matrix microstructure and consequent weakening. Sometimes this degradation can be extremely rapid and serious such as in acidic environments, while in other cases degradation occurs over long periods. Consequences of material failure are usually severe – adversely affecting the health and well-being of human communities and disturbing ecological balances. There are also large direct costs of maintaining and replacing deteriorated infrastructure and indirect costs from loss of production during maintenance work, which place a great burden on society. The focus of this book is on addressing issues concerning performance of cement-based materials in aggressive aqueous environments , by way of this State-of-the-Art Report. The book represents the work of many well-known and respected authors who contributed chapters or parts of chapters. Four main themes were addressed: I. Nature and kinetics of degradation and deterioration mechanisms of cement-based materials in aggressive aqueous environments, II. Modelling of deterioration in such environments, III. Test methods to assess performance of cement-based materials in such environments, and which can be used to characterise and rate relative performance and inform long term predictions, IV. Engineering implications and consequences of deterioration in aggressive aqueous environments, and engineering approaches to the problem.
Download or read book Stress corrosion Cracking written by Russell H. Jones and published by ASM International(OH). This book was released on 1992 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the many conditions under which stress-corrosion cracking (SCC) can occur, the parameters which control SCC, and the methodologies for mitigating and testing for SCC, plus information on mechanisms of SCC with experimental data on a variety of materials. Contains information about environmen
Download or read book Performance of Bio based Building Materials written by Dennis Jones and published by Woodhead Publishing. This book was released on 2017-07-07 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance of Bio-based Building Materials provides guidance on the use of bio-based building materials (BBBM) with respect to their performance. The book focuses on BBBM currently present on the European market. The state-of-the-art is presented regarding material properties, recommended uses, performance expectancies, testing methodology, and related standards. Chapters cover both ‘old and traditional’ BBBM since quite a few of them are experiencing a comeback on the market. Promising developments that could become commercial in the near future are presented as well. The book will be a valuable reference resource for those working in the bio-based materials research community, architects and agencies dealing with sustainable construction, and graduate students in civil engineering. Takes a unique approach to bio-based materials and presents a broad overview of the topics on relevant areas necessary for application and promotion in construction Contains a general description, notable properties related to performance, and applications Presents standards that are structured according to performance types
Download or read book Materials Performance Maintenance written by R.W. Revie and published by Elsevier. This book was released on 2016-04-20 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 25 papers taken from proceedings of the Thirtieth Annual Conference of Metallurgists, the first to be organized by the Corrosion Science Section of the Metallurgical Society of CIM. The keynote paper, Environmental Definition, presented by Dr. Roger Staehle, sets the tone for the volume with a focus on maintaining reliable performance by controlling corrosion. In the subsequent papers presented here, topics discussed include corrosion protection and histories, water mains, inhibitors, and expert systems and data handling.
Download or read book Materials Performance and the Deep Sea written by American society for testing and materials and published by ASTM International. This book was released on 1969 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Food Industry and Packaging Materials Performance oriented Guidelines for Users written by Salvatore Parisi and published by Smithers Rapra. This book was released on 2013-04-18 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed and comprehensible information about Quality Control (QC) in the industry. Different viewpoints are explained in relation to food companies, packaging producers and technical experts, including regulatory aspects. One of the most important steps is the comprehension of QC failures in relation to the 'food product' (food/packaging). The book also presents a detailed selection of proposals about new testing methods. On the basis of regulatory obligations in the EU about the technological suitability of food packaging materials, a list of 'performance-oriented' guidelines is proposed. Food sectors are mentioned in relation to products, related packaging materials, known failures and existing quality control procedures. This volume serves as a practical guide on food packaging and QC methods and a quick reference to food operators, official safety inspectors, public health institutions, Certification bodies, students and researchers from the academia and the industry.
Download or read book Concepts and Design of Materials Nanoarchitectonics written by Omar Azzaroni and published by Royal Society of Chemistry. This book was released on 2022-02-09 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of nanoarchitechtonics was introduced to describe the correct manipulation of nanoscale materials in the creation of nano-devices and applications. Nanoarchitectonics has begun to spread into many fields including nanostructured materials synthesis, supramolecular assembly, nanoscale structural fabrications, materials hybridizations, materials and structures for energy and environmental sciences, device and physical application, and bio- and medical applications. Following on from the 2012 title Manipulation of Nanoscale Materials, Concepts and Design of Materials Nanoarchitectonics covers the introductory features underlying the field, presenting a unifying overview of the theoretical aspects and emerging applications that are changing the capability to understand and design advanced functional materials. Edited by pioneers of the field, this book will appeal to researchers working in nanoscience, materials science, supramolecular chemistry, physical chemistry and organic chemistry, as well as graduate students in these areas.
Download or read book Biological Performance of Materials written by Jonathan Black and published by CRC Press. This book was released on 2005-12-20 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioengineers need a thorough grounding in biocompatibility - the biological performance of materials. Until now, there were no publications suitable for a neophyte in the field; prior publications were either not comprehensive or focused on rather narrow interests. Drawing on the author's 35 years of experience as a teacher, researcher, and consult
Download or read book Laser Additive Manufacturing of High Performance Materials written by Dongdong Gu and published by Springer. This book was released on 2015-04-21 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book entitled “Laser Additive Manufacturing of High-Performance Materials” covers the specific aspects of laser additive manufacturing of high-performance new materials components based on an unconventional materials incremental manufacturing philosophy, in terms of materials design and preparation, process control and optimization and theories of physical and chemical metallurgy. This book describes the capabilities and characteristics of the development of new metallic materials components by laser additive manufacturing process, including nanostructured materials, in situ composite materials, particle reinforced metal matrix composites, etc. The topics presented in this book, similar as laser additive manufacturing technology itself, show a significant interdisciplinary feature, integrating laser technology, materials science, metallurgical engineering and mechanical engineering. This is a book for researchers, students, practicing engineers and manufacturing industry professionals interested in laser additive manufacturing and laser materials processing. Dongdong Gu is a Professor at College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics (NUAA), PR China.
Download or read book Cement based Composites Materials Mechanical Properties and Performance written by A.M. Brandt and published by CRC Press. This book was released on 1994-11-03 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers the properties and behaviour of cement-based materials from the point of view of composite science and technology. It deals particularly with newer forms of cement-based materials and also with a composite approach to conventional materials and their special properties. Emphasis is put on non-conventional reinforcement and design methods, problems at interfaces in the materials and on durability of structures made with them.
Download or read book High Performance Construction Materials written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Materials in Aerospace written by Harvey M. Flower and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerospace presents an extremely challenging environment for structural materials and the development of new, or improved, materials: processes for material and for component production are the subject of continuous research activity. It is in the nature of high performance materials that the steps of material and of component production should not be considered in isolation from one another. Indeed, in some cases, the very process of material production may also incorporate part or all of the component production itself and, at the very least, will influence the choice of material/component production method to be employed. How ever, the developments currently taking place are to be discovered largely within the confines of specialist conferences or books each dedicated to perhaps a single element of the overall process. In this book contributors, experts drawn from both academia and the aerospace industry, have joined together to combine their individual knowledge to examine high performance aerospace materials in terms of their production, structure, properties and applications. The central interrelationships between the development of structure through the production route and between structure and the properties exhibited in the final component are considered. It is hoped that the book will be of interest to students of aeronautical engineering and of materials science, together with those working within the aerospace industry. Harvey M. Flower Imperial College 1 Design requirements for aerospace structural materials C. J. Peel and P. J. Gregson 1.
Download or read book Performance of Bituminous and Hydraulic Materials in Pavements written by S.F. Brown and published by Routledge. This book was released on 2017-10-02 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains contributions from international experts, reflecting the rapid advances in the design of new improved bitumen and hydraulic bound composites, the trends in the use of waste and recycled materials and up-to-date methods of testing and evaluation.
Download or read book Shotcrete written by Dudley Robert Morgan and published by CRC Press. This book was released on 2022-03-29 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shotcrete: Materials, Performance and Use is a comprehensive textbook covering the current state-of-the-art shotcrete technology. It provides an overview of the many and various uses of shotcrete. Shotcrete is well suited for construction of curvilinear structures (domes, shells, bobsleigh/luge tracks, etc.) and overhead shotcrete applications (seismic retrofit, repairs, ground support, etc.) that could not be constructed technically and/or economically using conventional formed, cast-in-place concrete construction methods. It contains chapters on history, shotcrete materials and mixture proportioning, performance, shotcrete research, equipment and shotcrete application. It is also comprised of shotcrete case history examples including buildings and structures, infrastructure repair and rehabilitation, ground support and shoring, underground support in tunnels and mines, swimming pools and spas, and, finally, architectural shotcrete. This text should be of interest to design engineers and architects considering the use of the technology, as well as academics. It serves as a useful guide to contractors using shotcrete in one or more of its many and various applications.
Download or read book Materials Performance written by and published by . This book was released on 1998 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Elastomeric Materials Reinforced by Nano Carbons written by Luca Valentini and published by Elsevier. This book was released on 2019-08-20 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Performance Elastomeric Materials Reinforced by Nanocarbons: Multifunctional Properties and Industrial Applications provides detailed information on the latest techniques and state-of-the-art developments regarding elastomeric materials reinforced by nano-carbon. The book supports academic researchers and postgraduate students who are looking to further advance the research and study of high-performance, multifunctional materials. In addition, it enables those in industry to improve manufacture and end products by using these materials. Enables the reader to understand the latest advanced applications of high-performance elastomers reinforced by nano-carbons Unlocks the door to essential properties for harsh environments, such as thermal conductivity, oil resistance, permeability, de-icing, and cracking resistance Covers the processability of elastomers reinforced by nano-carbons, including extrusion, compression, molding methods and techniques
Download or read book Analytical Sample Preparation With Nano and Other High Performance Materials written by Rafael Lucena and published by Elsevier. This book was released on 2021-10-23 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Sample Preparation With Nano- and Other High-Performance Materials covers advanced sample treatment techniques and the new materials that can be used to boost their performance. The evolution of sample treatment over the last two decades has resulted in the development of new techniques and application of new materials. This is a must-have resource for those studying advanced analytical techniques and the role of high-performance materials in analytical chemistry. The book explains the underlying principles needed to properly understand sample preparation, and also examines the latest materials - including nanomaterials - that result in greater sensitivity and specificity. The book begins with a section devoted to all the various sample preparation techniques and then continues with sections on high-performance sorbents and high-performance solvents. Combines basic, fundamental principles and advanced concepts and applications for a comprehensive treatment of sample preparation with new materials Defines nano- and other high-performance materials in this context, including carbon nanoparticles, inorganic nanoparticles, ionic liquids, supramolecular solvents, and more Includes discussion of all the latest advancements and new findings in both techniques and materials used for proper sample preparation
