Download or read book Materials Information for CAD CAM written by Philip Sargent and published by Elsevier. This book was released on 2016-02-26 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Information for CAD/CAM addresses the problem of designing databases, expert system, communication systems, and decision support aids that can be integrated with manual and software-supported tasks in design and manufacture, in CAD and CAM. This book covers tasks of materials selection, materials process simulation, and materials modelling that involve access to materials identification or property information. Organized into eight chapters, this book begins with an overview of the use of materials information in engineering design and manufacture. This text then explains how computerized CAD/CAM systems change the ways in which this information has been effectively used. Other chapters consider the organizational and technical aspects of data interchange in general. This book discusses as well the requirements in representing materials information in databases. The final chapter deals with integrated design environments with respects to their capabilities for utilizing materials information. This book is intended to be suitable for anyone who is planning the construction, management, or use of any kind of engineering materials property information system.
Download or read book Computer Aided Materials Selection During Structural Design written by National Research Council and published by National Academies Press. This book was released on 1995-04-03 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection of the proper materials for a structural component is a critical activity that is governed by many, often conflicting factors. Incorporating materials expert systems into CAD/CAM operations could assist designers by suggesting potential manufacturing processes for particular products to facilitate concurrent engineering, recommending various materials for a specific part based on a given set of characteristics, or proposing possible modifications of a design if suitable materials for a particular part do not exist. This book reviews the structural design process, determines the elements, and capabilities required for a materials selection expert system to assist design engineers, and recommends the areas of expert system and materials modeling research and development required to devise a materials-specific design system.
Download or read book CAD CAM CIM written by P. Radhakrishnan and published by New Age International. This book was released on 2008 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Technology Of Cad/Cam/Cim Deals With The Creation Of Information At Different Stages From Design To Marketing And Integration Of Information And Its Effective Communication Among The Various Activities Like Design, Product Data Management, Process Planning, Production Planning And Control, Manufacturing, Inspection, Materials Handling Etc., Which Are Individually Carried Out Through Computer Software. Seamless Transfer Of Information From One Application To Another Is What Is Aimed At.This Book Gives A Detailed Account Of The Various Technologies Which Form Computer Based Automation Of Manufacturing Activities. The Issues Pertaining To Geometric Model Creation, Standardisation Ofgraphics Data, Communication, Manufacturing Information Creation And Manufacturing Control Have Been Adequately Dealt With. Principles Of Concurrent Engineering Have Been Explained And Latest Software In The Various Application Areas Have Been Introduced.The Book Is Written With Two Objectives To Serve As A Textbook For Students Studying Cad/Cam/Cim And As A Reference Book For Professional Engineers.
Download or read book Computerization and Networking of Materials Databases written by Thomas Ian Barry and published by ASTM International. This book was released on 1992 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the symposium on the Computerization and Use of Materials Property Data, held in Cambridge, UK, September 1991, sponsored by the ASTM and the (UK) National Physical Laboratory. The volume is divided into four sections: standards and data representation, integration of materials i
Download or read book Handbook of Materials Selection for Engineering Applications written by George Murray and published by CRC Press. This book was released on 1997-07-03 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the rapid advances in new materials development, this work offers up-to-date information on the properties and applications of various classes of metals, polymers, ceramics and composites. It aims to simplify the materials selection process and show how to lower materials and manufacturing costs, drawing on such sources as vendor supplied and quality control test data.
Download or read book Manual on the Building of Materials Databases written by and published by ASTM International. This book was released on with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Aided Design and Manufacturing written by Zhuming Bi and published by John Wiley & Sons. This book was released on 2020-02-04 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broad coverage of digital product creation, from design to manufacture and process optimization This book addresses the need to provide up-to-date coverage of current CAD/CAM usage and implementation. It covers, in one source, the entire design-to-manufacture process, reflecting the industry trend to further integrate CAD and CAM into a single, unified process. It also updates the computer aided design theory and methods in modern manufacturing systems and examines the most advanced computer-aided tools used in digital manufacturing. Computer Aided Design and Manufacturing consists of three parts. The first part on Computer Aided Design (CAD) offers the chapters on Geometric Modelling; Knowledge Based Engineering; Platforming Technology; Reverse Engineering; and Motion Simulation. The second part on Computer Aided Manufacturing (CAM) covers Group Technology and Cellular Manufacturing; Computer Aided Fixture Design; Computer Aided Manufacturing; Simulation of Manufacturing Processes; and Computer Aided Design of Tools, Dies and Molds (TDM). The final part includes the chapters on Digital Manufacturing; Additive Manufacturing; and Design for Sustainability. The book is also featured for being uniquely structured to classify and align engineering disciplines and computer aided technologies from the perspective of the design needs in whole product life cycles, utilizing a comprehensive Solidworks package (add-ins, toolbox, and library) to showcase the most critical functionalities of modern computer aided tools, and presenting real-world design projects and case studies so that readers can gain CAD and CAM problem-solving skills upon the CAD/CAM theory. Computer Aided Design and Manufacturing is an ideal textbook for undergraduate and graduate students in mechanical engineering, manufacturing engineering, and industrial engineering. It can also be used as a technical reference for researchers and engineers in mechanical and manufacturing engineering or computer-aided technologies.
Download or read book CAD CAM Computer Aided Design and Manufacturing written by Groover and published by Pearson Education India. This book was released on 2013 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors examine interactive computer graphics and its use in designing industrial robots, computer control of manufacturing processes, computer-integrated production control, automated inspections, and flexible manufacturing systems. They also discuss the implementation of turnkey CAD/CAM systems.
Download or read book Composite Materials Technology written by S.M. Sapuan and published by CRC Press. This book was released on 2009-12-23 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial neural networks (ANN) can provide new insight into the study of composite materials and can normally be combined with other artificial intelligence tools such as expert system, genetic algorithm, and fuzzy logic. Because research on this field is very new, there is only a limited amount of published literature on the subject.Compiling in
Download or read book Resistant Materials written by Lesley Cresswell and published by Heinemann. This book was released on 2003 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The student-friendly format and specification-matched content makes this a vital tool for achieving success at AS and A2 level.
Download or read book Dental Materials written by W. Stephan Eakle and published by Elsevier Health Sciences. This book was released on 2019-09-16 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: - NEW! Additional application criteria listings support optimal decision making. - NEW! Additional modern illustrations enhance comprehension of complex biomaterials concepts. - NEW! Evidence-based content on dynamic areas such as esthetics, ceramics, implants, and impressions. - IMPROVED! Test Bank with cognitive leveling based on Bloom's Taxonomy and mapping to National Board Dental Hygiene Examination (NBDHE) blueprint.
Download or read book Material Design written by Thomas Schröpfer and published by Walter de Gruyter. This book was released on 2012-12-13 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The approach of "Informing Architecture by Materiality" opens the way to an innovative use of materials in the design professions. Taking material qualities and properties such as texture, elasticity, transparency and fluidity as a point of departure, the concept described and employed here transcends the conventional definitions of building materials. Instead, the focus is on a multitude of material operations, like folding and bending, carving and cutting, weaving and knitting, mirroring and screening. The featured design strategies and methods address established and "new" materials alike. They are applied both to the scale of the detail and the entire building. The examples comprise prototype structures as well as large building projects. Eight chapters deal with surfaces and layers, joints and juctions, weaving and texturing, nanoscale transformations, responsiveness, the integration of ephemeral factors like wind and light as well as material collections providing professional resources. Written by renowned experts in this field, the book features many examples from international contemporary architecture. The introductory part provides the conceptual background, while a final chapter describes consequences for pressing issues of today, like sustainability or life cycle assessment.
Download or read book CIM Computer Integrated Manufacturing written by August-Wilhelm Scheer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern information technology has opened up new possibilities of flexibilization and cost reduction in production. The author defines CIM - Computer Integrated Manufacturing - as a concept for the structuring of industrial enterprises. Manufacturing technologies demand a CIM concept which can be realized through the capabilities of information processing available today. The idea of integrating different areas of CIM, such as production planning and control (PPC), computer aided design (CAD) and computer aided manufacturing (CAM), is explained through operating chains and put into a CIM architecture based on a hierarchy of EDP systems. The stance taken in this book of defining CIM as a total concept for industrial enterprises is increasingly gaining ground. The book does not aim to put the functional details of the individual CIM components (PPC, CAD, CAP and CAM) in the foreground, but rather to emphasize the integration principles for the functional demands of the individual components. This book appeared in the Federal Republic of Germany in 1987, and within one year it had run to three editions. The author contributes to this book not only his scientific knowledge but also his experience as a consultant for implementing CIM concepts.
Download or read book CAD CAM Robotics and Factories of the Future 90 written by Suren N. Dwivedi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexibility is as acceptable an objective for today's industrial community as is automation. Thus, the title of this conference proceedings volume - Flexible Automation - reflects an added emphasis to the usual industrial automation. As with general automation that has impacted every component of the manufacturing office and plant, the identity of flexible automation can possess various forms and functions. The papers in this volume have been grouped into two main categories. One category deals with implementation of so-called "intelligent manufacturing". This means use of algorithmic methods and artificial intelligence approaches to various problems encountered in practical factory automation tasks. The placement of papers into five chapters of this part cannot be very precise, due to multidisciplinary nature and constant rapid change of the field. The categories are arranged starting from problems of enhancement of current factory settings, and followed by the papers addressing more specific issues of production planning, process technology and product engineering. The fifth chapter contains papers on the very important aspects of factory automation - problems of design, simulation, operation and monitoring of manufacturing cells.
Download or read book Principles and Practices of CAD CAM written by Vikram Sharma and published by CRC Press. This book was released on 2023-12-18 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: CAD/CAM systems are perhaps the most crucial advancement in the field of new technology relating to engineering, design and drawing in all technical domains. CAD/CAM stands for computer-aided design and computer-aided manufacturing. These systems are useful in all facets of contemporary design and architecture. The fundamentals of CAD/CAM systems are covered in detail throughout this book. This book aims to introduce the fundamental aspects, complete with an adequate numberof illustrations and examples, without delving too deeply into the specifics of the subject matter. This book is valuable in the classroom for both teachers and students. Features Each chapter begins with the Learning Outcomes (LOs) section, which highlights the critical points of that chapter. All LOs, solved examples, and questions are mapped to six Bloom Taxonomy levels (BT levels). Offers fundamental concepts of CAD/CAM without becoming too complicated. Solved examples are presented in each section after the theoretical discussion to clarify the concept of that section. Chapter-end summaries reinforce key ideas and help readers recall the concepts discussed. Students and professionals need to have a working knowledge of CAD/CAM since it has many applications and continues to expand. Students at the undergraduate and graduate levels of engineering courses use this book as their primary textbook. It will also be helpful for managers, consultants, and professionals.
Download or read book Engineering Documentation for CAD CAM Applications written by Charles S. Knox and published by CRC Press. This book was released on 2020-08-13 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasizes the importance of consistent, well-planned, and computer-oriented engineering documentation systems to engineering, manufacturing, and accounting. It discusses the systems needed to optimize flow of information and increase the efficiency of modern CAD/CAM systems.
Download or read book Designing with Plastics written by P. R. Lewis and published by iSmithers Rapra Publishing. This book was released on 1993 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this report Dr Lewis surveys the current state of the art in designing with plastics, in terms of materials properties and processing technologies. He also considers the legal implications of intellectual property and product liability, as well as ergonomic and aesthetic design, parts consolidation and recyclability. His review is supported throughout by references to key processes and applications, including many well known consumer products, and further information can be derived from the 435 abstracts of published papers which complete the report.
