Download or read book Materials for Tribology written by William Glaeser and published by Elsevier. This book was released on 1992-05-07 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an extensive reference source on the materials used in tribological applications. Materials used in tribological applications are, for the most part, common materials used for general engineering applications. Many conventional engineering materials have been adapted to tribological uses and examples of these are given throughout the text. Literature that so far has been scattered and difficult to retrieve is now presented for the first time in this comprehensive treatise. The author has used his expertise in selecting materials for a wide variety of friction and wear applications to develop this data base on materials for tribology. In addition information has been selected from the literature on the behaviour of these materials in bearings, seals, gears, brakes, clutches, wire rope, valves, cams and wear surfaces and is included in the descriptive text. The materials have been grouped in families, relating to their composition. A short table is provided at the beginning of each chapter, listing the ranges of selected properties for the materials under discussion. In addition there are short summaries of the tribological applications this class of materials is used for. On the first page of each chapter one can find a guide for the selection of materials. Sufficient references to the literature are given to enable the reader to follow up in more detail the various topics discussed.

Download or read book Tribology Friction and Wear of Engineering Materials written by Hutchings and published by Springer. This book was released on 1992 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology covers the fundamentals of tribology and the tribological response of all types of materials, including metals, ceramics, and polymers. The book provides a solid scientific foundation without relying on extensive mathematics, an approach that will allow readers to formulate appropriate solutions when faced with practical problems. Topics considered include fundamentals of surface topography and contact, friction, lubrication, and wear. The book also presents up-to-date discussions on the treatment of wear in the design process, tribological applications of surface engineering, and materials for sliding and rolling bearings. Tribology will be valuable to engineers in the field of tribology, mechanical engineers, physicists, chemists, materials scientists, and students. Features Provides an excellent general introduction to the friction, wear, and lubrication of materials Presents a balanced comparison of the tribological behavior of metals, ceramics, and polymers Includes discussions on tribological applications of surface engineering and materials for sliding and rolling bearings Emphasizes the scientific foundation of tribology Discusses the treatment of wear in the design process Uses SI units throughout and refers to U.S., U.K., and other European standards and material designations

Download or read book Tribology in Materials and Manufacturing written by Amar Patnaik and published by BoD – Books on Demand. This book was released on 2021-02-03 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology in Materials and Manufacturing - Wear, Friction and Lubrication brings an interdisciplinary perspective to accomplish a more detailed understanding of tribological assessments, friction, lubrication, and wear in advanced manufacturing. Chapters cover such topics as ionic liquids, non-textured and textured surfaces, green tribology, lubricants, tribolayers, and simulation of wear.

Download or read book Tribology of Ceramics and Composites written by Bikramjit Basu and published by John Wiley & Sons. This book was released on 2011-10-07 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book helps students and practicing scientists alike understand that a comprehensive knowledge about the friction and wear properties of advanced materials is essential to further design and development of new materials. With important introductory chapters on the fundamentals, processing, and applications of tribology, the book then examines in detail the nature and properties of materials, the friction and wear of structural ceramics, bioceramics, biocomposites, and nanoceramics, as well as lightweight composites and the friction and wear of ceramics in a cryogenic environment.

Download or read book Mechanical Tribology written by George E. Totten and published by CRC Press. This book was released on 2004-04-22 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studying the morphology, defects, and wear behavior of a variety of material surfaces, Mechanical Tribology examines popular and emerging surface characterization techniques for assessment of the physical, mechanical, and chemical properties of various modified surfaces, thin films, and coatings. Its chapters explore a wide range of tribolo

Download or read book Nano tribology and Materials in MEMS written by Sujeet K. Sinha and published by Springer Science & Business Media. This book was released on 2013-08-27 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together recent developments in the areas of MEMS tribology, novel lubricants and coatings for nanotechnological applications, biomimetics in tribology and fundamentals of micro/nano-tribology. Tribology plays important roles in the functioning and durability of machines at small length scales because of the problems associated with strong surface adhesion, friction, wear etc. Recently, a number of studies have been conducted to understand tribological phenomena at nano/micro scales and many new tribological solutions for MEMS have been proposed.

Download or read book Microstructure and Wear of Materials written by K.-H. Zum Gahr and published by Elsevier. This book was released on 1987-03-01 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book will be useful not only to practising engineers and scientists, but also to advanced students interested in wear. It reviews our current understanding of the influence of microstructural elements and physical properties of materials (metals, polymers, ceramics and composites) on wear. The introductory chapters describe the relation between microstructure and mechanical properties of materials, surfaces in contact and the classification of wear processes. The following chapters are concerned with wear modes of great practical interest such as grooving wear, sliding wear, rolling-sliding wear and erosive wear. Our present understanding of abrasion, adhesion, surface fatigue and tribochemical reactions as the relevant wear mechanisms is discussed, and new wear models are presented. In addition to extensive experimental results, sketches have been widely used for clarifying the physical events.

Download or read book Tribology and Applications of Self Lubricating Materials written by Emad Omrani and published by CRC Press. This book was released on 2017-11-06 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology and Applications of Self-Lubricating Materials provides insight into the complex mechanisms behind the development of self-lubricating materials, which due to their ability to transfer embedded solid lubricants to the contact surface to decrease wear rate and friction in the absence of an external lubricant, make up an important part of engineering materials used today. This book emphasizes an understanding of the tribological nature of different composites such as metal, polymer, and ceramic matrix composites and discusses the compatibility of these composites with specific lubricants. The book also offers a view of advancements in the development of self-lubricating mechanisms and covers the latest technologies in the field.

Download or read book Tribology of Metal Cutting written by Viktor P. Astakhov and published by Elsevier. This book was released on 2006-12-18 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology of Metal Cutting deals with the emerging field of studies known as Metal Cutting Tribology. Tribology is defined as the science and technology of interactive surfaces moving relative each other. It concentrates on contact physics and mechanics of moving interfaces that generally involve energy dissipation. This book summarizes the available information on metal cutting tribology with a critical review of work done in the past. The book covers the complete system of metal cutting testing. In particular, it presents, explains and exemplifies a breakthrough concept of the physical resource of the cutting tool. It also describes the cutting system physical efficiency and its practical assessment via analysis of the energy partition in the cutting system. Specialists in the field of metal cutting will find information on how to apply the major principles of metal cutting tribology, or, in other words, how to make the metal cutting tribology to be useful at various levels of applications. The book discusses other novel concepts and principles in the tribology of metal cutting such as the energy partition in the cutting system; versatile metrics of cutting tool wear; optimal cutting temperature and its use in the optimization of the cutting process; the physical concept of cutting tool resource; and embrittlement action. This book is intended for a broad range of readers such as metal cutting tool, cutting insert, and process designers; manufacturing engineers involved in continuous process improvement; research workers who are active or intend to become active in the field; and senior undergraduate and graduate students of manufacturing. · Introduces the cutting system physical efficiency and its practical assessment via analysis of the energy partition in the cutting system. · Presents, explains and exemplifies a breakthrough concept of the physical resource of the cutting tool. · Covers the complete system of metal cutting testing.

Download or read book Tribology of Polymeric Nanocomposites written by Klaus Friedrich and published by Butterworth-Heinemann. This book was released on 2013-05-14 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology of Polymeric Nanocomposites provides a comprehensive description of polymeric nanocomposites, both as bulk materials and as thin surface coatings, and provides rare, focused coverage of their tribological behavior and potential use in tribological applications. Providing engineers and designers with the preparation techniques, friction and wear mechanisms, property information and evaluation methodology needed to select the right polymeric nanocomposites for the job, this unique book also includes valuable real-world examples of polymeric nanocomposites in action in tribological applications. Provides a complete reference to polmer nanocomposite material use in tribology from preparation through to selection and use Explains the theory through examples of real-world applications, keeping this high-level topic practical and accessible Includes contributions from more than 20 international tribology experts to offer broad yet detailed coverage of this fast-moving field

Download or read book Tribology written by Ian Hutchings and published by Butterworth-Heinemann. This book was released on 2017-04-13 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology: Friction and Wear of Engineering Materials, Second Edition covers the fundamentals of tribology and the tribological response of all classes of materials, including metals, ceramics, and polymers. This fully updated and expanded book maintains its core emphasis on friction and wear of materials, but now also has a strengthened coverage of the more traditional tribological topics of contact mechanics and lubrication. It provides a solid scientific foundation that will allow readers to formulate appropriate solutions when faced with practical problems, as well as to design, perform and interpret meaningful tribological tests in the laboratory. Topics include the fundamentals of surface topography and contact mechanics, friction, lubrication, and wear (including tribo-corrosion), as well as surface engineering, selection of materials and design aspects. The book includes case studies on bearings, automotive tribology, manufacturing processes, medical engineering and magnetic data storage that illustrate some of the modern engineering applications in which tribological principles play vital roles. Each chapter is complemented by a set of questions suitable for self-study as well as classroom use. This book provides valuable material for advanced undergraduates and postgraduates studying mechanical engineering, materials science and other technical disciplines, and will also be a useful first reference point for any engineer or scientist who encounters tribological issues. Provides an excellent general introduction to friction, wear, and lubrication of materials Acts as the ideal entry point to the research literature in tribology Provides the tribological principles to underpin the design process Through systematic coverage of the subject and appropriate questions, develops the reader’s understanding and knowledge of tribology in a logical progression.

Download or read book Tribological Applications of Composite Materials written by Mohamed Thariq Hameed Sultan and published by Springer Nature. This book was released on 2020-12-14 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the current advances and practices in tribological applications of composite materials under various processes, presenting the development, characterization, and morphological properties of composite materials in tribological applications. It covers a wide range of subjects, extending from fundamental research on the tribological characteristics of various multi-phase materials to the final applications of composites in wear loaded, technical components. It brings together contributions from researchers who discusses innovative experimental approaches and analytical techniques, creating a reference with comprehensive coverage of modern research techniques and the potential application of tribological composites in biomedical, aerospace, automotive, marines and construction industries. This volume will be of interest to material science researchers working in both industry and academia

Download or read book Tribology of Plastic Materials written by Y. Yamaguchi and published by Elsevier. This book was released on 1990-06-18 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a thorough overview on workable theories and reliable experimental data on the use of plastic materials for sliding parts. Divided into four parts. Chapters 1 and 2 deal with current theories of friction and wear, and include discussion of various hypotheses based upon experimental studies. Chapter 3 details experiments designed to improve tribological performance via polymer blending and composite production, whilst Chapter 4 explains how the data obtained from these experiemnts can be applied to sliding machine parts. The work will prove useful in the design of plastic materials and components and will also provide a stepping-stone toward future innovations in this field.

Download or read book Tribology Materials Characterization and Applications written by Bernice Wyong and published by . This book was released on 2020-09-15 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: The engineering and science of interacting surfaces in relative motion is known as tribology. It studies and applies the principles of friction, wear and lubrication. Tribology is an interdisciplinary field which draws upon other disciplines such as physics, materials science, biology, engineering, chemistry and mathematics. The fundamental concepts of tribology include tribosystem, tribofilm and stribeck curve. Tribosystem is useful in providing a comprehensive assessment of the important outputs, inputs and losses to tribological systems. Tribofilms are layers which form upon surfaces that are tribologically stressed, and reduce friction and wear in the tribological systems. The stribeck curve is used to understand how the friction in fluid-lubricated contacts is a non-linear function of lubricant viscosity, contact load and entrainment velocity. The topics included in this book on tribology are of utmost significance and bound to provide incredible insights to readers. This book consists of contributions made by international experts. It will help the readers in keeping pace with the rapid changes in this field.

Download or read book Wear written by Gwidon W. Stachowiak and published by John Wiley & Sons. This book was released on 2006-08-14 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is emerging from the realm of steam engines and crank-case lubricants and becoming key to vital new technologies such as nanotechnology and MEMS. Wear is an integral part of tribology, and an effective understanding and appreciation of wear is essential in order to achieve the reliable and efficient operation of almost any machine or device. Knowledge in the field has increased considerably over recent years, and continues to expand: this book is intended to stimulate its readers to contribute towards the progress of this fascinating subject that relates to most of the known disciplines in physical science. Wear – Materials, Mechanisms and Practice provides the reader with a unique insight into our current understanding of wear, based on the contributions of numerous internationally acclaimed specialists in the field. Offers a comprehensive review of current knowledge in the field of wear. Discusses latest topics in wear mechanism classification. Includes coverage of a wide variety of materials such as metals, polymers, polymer composites, diamonds, and diamond-like films and ceramics. Discusses the chemo-mechanical linkages that control tribology, providing a more complete treatment of the subject than just the conventional mechanical treatments. Illustrated throughout with carefully compiled diagrams that provide a unique insight into the controlling mechanisms of tribology. The state of the art research on wear and the mechanisms of wear featured will be of interest to post-graduate students and lecturers in engineering, materials science and chemistry. The practical applications discussed will appeal to practitioners across virtually all sectors of engineering and industry including electronic, mechanical and electrical, quality and reliability and design.

Download or read book Handbook of Tribology written by Bharat Bhushan and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook seeks to present authoritative coverage of tribology, including: physics of materials; an overview of soft, solid-lubricants and hard, wear-resistant coatings and their deposition techniques; and surface treatment techniques and the latest engineering specifications. It provides data, mostly in tabular form, on friction and wear characteristics of bulk materials, allowing the user to decide the appropriate course of action for selecting the proper coating material, as well as surface treatment techniques for maximum friction and wear reduction.

Download or read book Fundamentals of Tribology written by Rahnejat Homer and published by World Scientific. This book was released on 1998-10-20 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Tribology deals with the fundamentals of lubrication, friction and wear, as well as mechanics of contacting surfaces and their topography. It begins by introducing the reader to the importance of tribology in everyday life and offers a brief history of the subject. It then describes the nature of rough surfaces and the mechanics of contacting elastic solids and their deformation under load and friction in their relative motion. The book goes on to discuss the importance of lubricant rheology with respect to viscosity and density. Then, the principles of hydrodynamic lubrication are covered with derivations of the governing Reynolds and energy equations. Applications of hydrodynamic lubrication in various forms of bearings -- journal bearings, thrust bearings and externally pressurised bearings -- are outlined. The important and still evolving subject of elastohydrodynamic lubrication is treated in some detail, both at its fundamentals and its applications in thin shell or overlay bearings, cam-followers and internal combustion engine pistons. The fundamentals of biotribology are also covered, particularly its applications to endo-articular mammalian joints such as hip and knee joints and their arthroplasty. In addition, there is a treatment of the rapidly emerging knowledge of tribological phenomena in lightly loaded vanishing conjunctions (nanotribology), in natural systems and very small devices, such as MEMS and high density data storage media. There is also a new chapter on the rapidly emerging subject of surface texturing to promote retention of microreservoirs of lubricant, acting as microbearings and improving lubrication of otherwise poorly lubricated conjunctions. This book targets the undergraduate and postgraduate body as well as engineering professionals in industry, where often a quick solution or understanding of certain tribological fundamentals is sought. The book can also form an initial basis for those interested in research into certain aspects of tribology.