Download or read book Materials and Technologies in Precision Machinery II written by Gow-Yi Tzou and published by Trans Tech Publications Ltd. This book was released on 2020-02-04 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains articles that were submitted to the 4th International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2019, Kenting, Taiwan, May 24-26, 2019) and present the last research results in the area of materials science and materials processing technologies. We hope this collection will be interesting and useful for many engineers and academic researchers.
Download or read book Materials and Technologies in Precision Machinery II written by Gow-Yi Tzou and published by . This book was released on 2020 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials and Technologies in Precision Machinery II written by Gow-Yi Tzou and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains articles that were submitted to the 4th International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2019, Kenting, Taiwan, May 24-26, 2019) and present the last research results in the area of materials science and materials processing technologies. We hope this collection will be interesting and useful for many engineers and academic researchers. Steel, Alloy, Composites, Metal Matrix Composites, Ceramics, Materials Processing Technologies, Mechanical Properties Materials Science, Mechanical Engineering, Manufacturing.
Download or read book Materials and Technologies in Precision Machinery written by Gow Yi Tzou and published by Trans Tech Publications Ltd. This book was released on 2015-09-02 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 1st International Conference on Precision Machinery and Manufacturing Technology 2015 (ICPMMT 2015), May 22-24, 2015, Pingtung, Taiwan
Download or read book Materials and Technologies in Precision Machinery III written by Gow-Yi Tzou and published by Trans Tech Publications Ltd. This book was released on 2020-10-05 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text papers from the 5th International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2020) Selected, peer-reviewed papers from the 5th International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2020) 3-7 February, 2020, Auckland, New Zealand
Download or read book Precision Machining of Advanced Materials written by Liangchi Zhang and published by . This book was released on 2001 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision machining is an essential manufacturing process to achieve high dimensional accuracy and high surface integrity of functional components for various technological applications, such as those in aeronautical, biomedical, mechanical, metrological, mechatronic, nano-technological and microscopy industries. To achieve a satisfactory operation of precision machining, however, one must have a deep understanding of the setting and control of machining conditions, mechanisms of material removal and effectiveness of the cutting tools. As a result, a quality precision machining requires a comprehensive integration of the development of machine tools, the improvement of machining methods and the wise application of materials science and engineering and mechanics of solids. recent research, development and applications on the precision machining of advanced materials. It covers three major aspects of precision machining, i.e., mechanisms of machining and material removal, friction and wear problems associated with cutting tools and development of new methods and new tools for more cost-effective processes. machining methods and conditions to achieve high surface integrity and accuracy. For example, silicon monocrystalls are brittle in nature and are chemically sensitive to machining environment. Composites have at least two phases with different mechanical properties. These need to be considered carefully in machining as otherwise unacceptable damage will take place in either the workpiece or the cutting tool or in both. The papers included in this volume deal with a wide range of difficult-to-machine materials, such as silicon, glass, carbon-fibre reinforced composites, CVD-SiC film and ceramics. The methodologies presented address both industrial production problems and fundamental issues, including polishing, grinding, electrochemical discharge machining, abrasive jet machining, laser sintering, chemo- mechanical machining, drilling, fractal analysis, molecular dynamics analysis and finite element simulation. The volume should therefore be of interest to production and research engineers, research students and academics in the area.
Download or read book Precision Engineering written by K. Narayanasamy and published by Alpha Science Int'l Ltd.. This book was released on 2000 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-electronics, micro-optics and micro-mechanical components form an integral part of advanced engineered products coming under the broad area of precision engineering. This book covers theme articles and research reports covering the broad area of precision engineering.
Download or read book Precision Manufacturing written by David A. Dornfeld and published by Springer Science & Business Media. This book was released on 2007-11-22 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision Manufacturing provides an introduction to precision engineering for manufacturing. With an emphasis on design and performance of precision machinery for manufacturing – machine tool elements and structure, sources of error, precision machining processes and process models sensors for process monitoring and control, metrology, actuators, and machine design. This book will be of interest to design engineers, quality engineers and manufacturing engineers, academics and those who may or may not have previous experience with precision manufacturing, but want to learn more.
Download or read book Microfabrication and Precision Engineering written by J. Paulo Davim and published by Woodhead Publishing. This book was released on 2016-11-19 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfabrication and precision engineering is an increasingly important area relating to metallic, polymers, ceramics, composites, biomaterials and complex materials. Micro-electro-mechanical-systems (MEMS) emphasize miniaturization in both electronic and mechanical components. Microsystem products may be classified by application, and have been applied to a variety of fields, including medical, automotive, aerospace and alternative energy. Microsystems technology refers to the products as well as the fabrication technologies used in production. With detailed information on modelling of micro and nano-scale cutting, as well as innovative machining strategies involved in microelectrochemical applications, microchannel fabrication, as well as underwater pulsed Laser beam cutting, among other techniques, Microfabrication and Precision Engineering is a valuable reference for students, researchers and professionals in the microfabrication and precision engineering fields. - Contains contributions by top industry experts - Includes the latest techniques and strategies - Special emphasis given to state-of-the art research and development in microfabrication and precision engineering
Download or read book Materials Characterisation and Mechanism of Micro Cutting in Ultra Precision Diamond Turning written by Sandy Suet To and published by Springer. This book was released on 2017-05-23 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an in-depth study and elucidation on the mechanisms of the micro-cutting process, with particular emphasis and a novel viewpoint on materials characterization and its influences on ultra-precision machining. Ultra-precision single point diamond turning is a key technology in the manufacture of mechanical, optical and opto-electronics components with a surface roughness of a few nanometers and form accuracy in the sub-micrometric range. In the context of subtractive manufacturing, ultra-precision diamond turning is based on the pillars of materials science, machine tools, modeling and simulation technologies, etc., making the study of such machining processes intrinsically interdisciplinary. However, in contrast to the substantial advances that have been achieved in machine design, laser metrology and control systems, relatively little research has been conducted on the material behavior and its effects on surface finish, such as the material anisotropy of crystalline materials. The feature of the significantly reduced depth of cut on the order of a few micrometers or less, which is much smaller than the average grain size of work-piece materials, unavoidably means that conventional metal cutting theories can only be of limited value in the investigation of the mechanisms at work in micro-cutting processes in ultra-precision diamond turning.
Download or read book Machines Advances and Trends in Non conventional Abrasive and Precision Machining written by Mariusz Deja and published by MDPI. This book was released on 2021-09-03 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work included in this book pertains to advanced abrasive and nonconventional machining processes. These processes are at the forefront of modern technology, with significant practical significance. Their importance is also made clear by the case studies that are included in the research that is presented in the book, pertaining to important materials and high-end applications. However, the particularities of these manufacturing processes need to be further investigated and the processes themselves need to be optimized. This is conducted in the presented works with significant experimental and modeling work, incorporating modern tools of analysis and measurements.
Download or read book Basics of Precision Engineering written by Richard Leach and published by CRC Press. This book was released on 2018-04-09 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in engineering precision have tracked with technological progress for hundreds of years. Over the last few decades, precision engineering has been the specific focus of research on an international scale. The outcome of this effort has been the establishment of a broad range of engineering principles and techniques that form the foundation of precision design. Today’s precision manufacturing machines and measuring instruments represent highly specialised processes that combine deterministic engineering with metrology. Spanning a broad range of technology applications, precision engineering principles frequently bring together scientific ideas drawn from mechanics, materials, optics, electronics, control, thermo-mechanics, dynamics, and software engineering. This book provides a collection of these principles in a single source. Each topic is presented at a level suitable for both undergraduate students and precision engineers in the field. Also included is a wealth of references and example problems to consolidate ideas, and help guide the interested reader to more advanced literature on specific implementations.
Download or read book Modern Machining Technology written by Bijoy Bhattacharyya and published by Academic Press. This book was released on 2019-09-17 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Machining Technology: Advanced, Hybrid, Micro Machining and Super Finishing Technology explores complex and precise components with challenging shapes that are increasing in demand in industry. As the first book to cover all major technologies in this field, readers will find the latest technical developments and research in one place, allowing for easy comparison of specifications. Technologies covered include mechanical, thermal, chemical, micro and hybrid machining processes, as well as the latest advanced finishing technologies. Each topic is accompanied by a basic overview, examples of typical applications and studies of performance criteria. In addition, readers will find comparative advantages, model questions and solutions. - Addresses a broad range of modern machining techniques, providing specifications for easy comparison - Includes descriptions of the main applications for each method, along with the materials or products needed - Provides the very latest research in processes, including hybrid machining
Download or read book Precision Engineering written by M. V. Suryaprakash and published by Alpha Science Int'l Ltd.. This book was released on 2004 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current focus of manufacturing is towards flexible automation and miniaturization.
Download or read book Fly Cutting Technology for Ultra precision Machining written by Suet To and published by Springer Nature. This book was released on 2023-09-24 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers the fly cutting technique, an ultra-precision mechanical machining technology which is regarded as the fastest and most reliable low-cost machining method to generate high quality complex surfaces. The ultra-precision raster milling provides more flexibility and suitability for freeform and structural surfaces with a uniform quality with sub-micrometric form error and nanometric surface roughness. These surfaces are widely applied into optics, medicine, biotechnology, electronics, and communications. The fundamental and latest advancing knowledge of fly-cutting technology is important for the future development and applications in ultra-precision mechanical machining technology. This book provides a good reference for fly-cutting technology in ultra-precision machining for undergraduate and postgraduate students, researchers, engineers, and postdoctoral fellow in advanced manufacturing area. It gives the audience an overview of the working principles, process mechanism, salient features, applications, and research directions of ultra-precision fly-cutting technology.
Download or read book Progress in Precision Engineering written by Peter Seyfried and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: by Professor Pat McKeown Cranfield Precision Engineering, UK Member of Joint Organising Committee IPES6/UME2 PROGRESS IN PRECISION ENGINEERING Metal working companies in tool making, prototype manu facture and subcontract machining often use the label "precision engineering" to indicate that they are accustomed to working to finer tolerances than is normally expected in series production. But what we are concerned with in this and our preceding international conferences is much wider and deeper than this. Precision engineering is a grouping of multidis ciplinary scientific and engineering skills and techniques, firmly based on dimensional metrology, by which a wide range of new advanced technology products is made possible. In the last 5 - 10 years we have witnessed dramatic progress in precision engineering, particularly by the rapid development of its important sub-sets, micro-engineering and nanotechnology. I t is a part icular pleasure for me and my colleagues on the Organising Committee to welcome you to Braunschweig on the occasion of this the first joint international meeting in high precision manufacturing/precision engineering to be held in Germany. Our aim is to bring together the world's leading precision engineering practitioners from areas of application as diverse as optics for astronomy, micro and nano machining process research, design and development of ul tra preclslon machine tools and metrology equipment, advanced materials, bio medical research and new sensor/transducer systems.
Download or read book Machine Learning Applications in Non Conventional Machining Processes written by Bose, Goutam Kumar and published by IGI Global. This book was released on 2021-02-05 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional machining has many limitations in today’s technology-driven world, which has caused industrial professionals to begin implementing various optimization techniques within their machining processes. The application of methods including machine learning and genetic algorithms has recently transformed the manufacturing industry and created countless opportunities in non-traditional machining methods. Significant research in this area, however, is still considerably lacking. Machine Learning Applications in Non-Conventional Machining Processes is a collection of innovative research on the advancement of intelligent technology in industrial environments and its applications within the manufacturing field. While highlighting topics including evolutionary algorithms, micro-machining, and artificial neural networks, this book is ideally designed for researchers, academicians, engineers, managers, developers, practitioners, industrialists, and students seeking current research on intelligence-based machining processes in today’s technology-driven market.
