Download or read book Materials and Processes for Next Generation Lithography written by and published by Elsevier. This book was released on 2016-11-08 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the requirements of the semiconductor industry have become more demanding in terms of resolution and speed it has been necessary to push photoresist materials far beyond the capabilities previously envisioned. Currently there is significant worldwide research effort in to so called Next Generation Lithography techniques such as EUV lithography and multibeam electron beam lithography. These developments in both the industrial and the academic lithography arenas have led to the proliferation of numerous novel approaches to resist chemistry and ingenious extensions of traditional photopolymers. Currently most texts in this area focus on either lithography with perhaps one or two chapters on resists, or on traditional resist materials with relatively little consideration of new approaches. This book therefore aims to bring together the worlds foremost resist development scientists from the various community to produce in one place a definitive description of the many approaches to lithography fabrication. Assembles up-to-date information from the world’s premier resist chemists and technique development lithographers on the properties and capabilities of the wide range of resist materials currently under investigation Includes information on processing and metrology techniques Brings together multiple approaches to litho pattern recording from academia and industry in one place

Download or read book Microlithography written by Bruce W. Smith and published by CRC Press. This book was released on 2020-05-01 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised Third Edition to the bestselling Microlithography: Science and Technology provides a balanced treatment of theoretical and operational considerations, from fundamental principles to advanced topics of nanoscale lithography. The book is divided into chapters covering all important aspects related to the imaging, materials, and processes that have been necessary to drive semiconductor lithography toward nanometer-scale generations. Renowned experts from the world’s leading academic and industrial organizations have provided in-depth coverage of the technologies involved in optical, deep-ultraviolet (DUV), immersion, multiple patterning, extreme ultraviolet (EUV), maskless, nanoimprint, and directed self-assembly lithography, together with comprehensive descriptions of the advanced materials and processes involved. New in the Third Edition In addition to the full revision of existing chapters, this new Third Edition features coverage of the technologies that have emerged over the past several years, including multiple patterning lithography, design for manufacturing, design process technology co-optimization, maskless lithography, and directed self-assembly. New advances in lithography modeling are covered as well as fully updated information detailing the new technologies, systems, materials, and processes for optical UV, DUV, immersion, and EUV lithography. The Third Edition of Microlithography: Science and Technology authoritatively covers the science and engineering involved in the latest generations of microlithography and looks ahead to the future systems and technologies that will bring the next generations to fruition. Loaded with illustrations, equations, tables, and time-saving references to the most current technology, this book is the most comprehensive and reliable source for anyone, from student to seasoned professional, looking to better understand the complex world of microlithography science and technology.

Download or read book Micro and Nano Machining of Engineering Materials written by Kaushik Kumar and published by Springer. This book was released on 2018-09-26 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the recent developments in the production of micro and nano size products, which cater to the needs of the industry. The processes to produce the miniature sized products with unique characteristics are addressed. Moreover, their application in areas such as micro-engines, micro-heat exchangers, micro-pumps, micro-channels, printing heads and medical implants are also highlighted. The book presents such microsystem-based products as important contributors to a sustainable economy. The recent research in this book focuses on the development of new micro and nano manufacturing platforms while integrating the different technologies to manufacture the micro and nano components in a high throughput and cost effective manner. The chapters contain original theoretical and applied research in the areas of micro- and nano-manufacturing that are related to process innovation, accuracy, and precision, throughput enhancement, material utilization, compact equipment development, environmental and life-cycle analysis, and predictive modeling of manufacturing processes with feature sizes less than one hundred micrometers.

Download or read book Microlithography written by Bruce W. Smith and published by CRC Press. This book was released on 2018-10-03 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the bestselling Microlithography: Science and Technology provides a balanced treatment of theoretical and operational considerations, from elementary concepts to advanced aspects of modern submicron microlithography. Each chapter reflects the current research and practices from the world's leading academic and industrial laboratories detailed by a stellar panel of international experts. New in the Second Edition In addition to updated information on existing material, this new edition features coverage of technologies developed over the last decade since the first edition appeared, including: Immersion Lithography 157nm Lithography Electron Projection Lithography (EPL) Extreme Ultraviolet (EUV) Lithography Imprint Lithography Photoresists for 193nm and Immersion Lithography Scatterometry Microlithography: Science and Technology, Second Edition authoritatively covers the physics, chemistry, optics, metrology tools and techniques, resist processing and materials, and fabrication methods involved in the latest generations of microlithography such as immersion lithography and extreme ultraviolet (EUV) lithography. It also looks ahead to the possible future systems and technologies that will bring the next generations to fruition. Loaded with illustrations, equations, tables, and time-saving references to the most current literature, this book is the most comprehensive and reliable source for anyone, from student to seasoned professional, looking to achieve robust, accurate, and cost-effective microlithography processes and systems.

Download or read book Electronics written by Michael Olorunfunmi Kolawole and published by CRC Press. This book was released on 2020-06-15 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives clear explanations of the technical aspects of electronics engineering from basic classical device formulations to the use of nanotechnology to develop efficient quantum electronic systems. As well as being up to date, this book provides a broader range of topics than found in many other electronics books. This book is written in a clear, accessible style and covers topics in a comprehensive manner. This book’s approach is strongly application-based with key mathematical techniques introduced, helpful examples used to illustrate the design procedures, and case studies provided where appropriate. By including the fundamentals as well as more advanced techniques, the author has produced an up-to-date reference that meets the requirements of electronics and communications students and professional engineers. Features Discusses formulation and classification of integrated circuits Develops a hierarchical structure of functional logic blocks to build more complex digital logic circuits Outlines the structure of transistors (bipolar, JFET, MOSFET or MOS, CMOS), their processing techniques, their arrangement forming logic gates and digital circuits, optimal pass transistor stages of buffered chain, sources and types of noise, and performance of designed circuits under noisy conditions Explains data conversion processes, choice of the converter types, and inherent errors Describes electronic properties of nanomaterials, the crystallites’ size reduction effect, and the principles of nanoscale structure fabrication Outlines the principles of quantum electronics leading to the development of lasers, masers, reversible quantum gates, and circuits and applications of quantum cells and fabrication methods, including self-assembly (quantum-dot cellular automata) and tunneling (superconducting circuits), and describes quantum error-correction techniques Problems are provided at the end of each chapter to challenge the reader’s understanding

Download or read book Drug Delivery Devices and Therapeutic Systems written by Eric Chappel and published by Academic Press. This book was released on 2020-11-07 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drug Delivery Devices and Therapeutic Systems examines the current technology and innovations moving drug delivery systems (DDS) forward. The book provides an overview on the therapeutic use of drug delivery devices, including design, applications, and a description of the design of each device. While other books focus on the therapy, the primary emphasis in this book is on current technologies for DDS applications, including microfluidics, nanotechnology, biodegradable hydrogel and microneedles, with a special emphasis on wearable DDS. As part of the Developments in Biomedical Engineering and Bioelectronics series, this book is written by experts in the field and informed with information directly from manufacturers. Pharmaceutical scientists, medical researchers, biomedical engineers and clinical professionals will find this an essential reference. Provides essential information on the most recent drug delivery systems available Explains current technology and its applications to drug delivery Contains contributions from biomedical engineers, pharmaceutical scientists and manufacturers

Download or read book Nanoimprint Lithography written by Hongbo Lan and published by Nova Science Publishers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithography, the fundamental fabrication process of semiconductor devices, has been playing a critical role in micro-nanofabrication technologies and manufacturing of Integrated Circuits (IC). Traditional optical lithography including contact and project photolithography has contributed significantly to the semiconductor device advancements. Currently, maintaining the rapid pace of half-pitch reduction requires overcoming the challenge of improving and extending the incumbent optical projection lithography technology while simultaneously developing alternative, next generation lithography (NGL) technologies to be used when optical projection lithography is no longer more economical than the alternatives. Furthermore, NIL is also one of the most promising low-cost, high-throughput technologies for manufacturing nanostructures as this highly technical book will give new insight to.

Download or read book Nanoimprint Lithography An Enabling Process for Nanofabrication written by Weimin Zhou and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoimprint Lithography: An enabling process for nanofabrication presents a comprehensive description of nanotechnology that is one of the most promising low-cost, high-throughput technologies for manufacturing nanostructures, and an emerging lithography candidates for 22, 16 and 11 nm nodes. It provides the exciting, multidisciplinary field, offering a wide range of topics covering: principles, process, material and application. This book would be of specific interest for researchers and graduate students in the field of nanoscience, nanotechnology and nanofabrication, material, physical, chemical, electric engineering and biology. Dr. Weimin Zhou is an associate professor at Shanghai Nanotechnology Promotion Center, China.

Download or read book Nanomaterials in Manufacturing Processes written by Dhiraj Sud and published by CRC Press. This book was released on 2022-08-02 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the manufacturing sector, nanomaterials offer promising outcomes for cost reduction in production, quality improvement, and minimization of environmental hazards. This book focuses on the application of nanomaterials across a wide range of manufacturing areas, including in paint and coatings, petroleum refining, textile and leather industries, electronics, energy storage devices, electrochemical sensors, as well as in industrial waste treatment. This book: Examines nanofluids and nanocoatings in manufacturing and their characterization. Discusses nanomaterial applications in fabricating lightweight structural components, oil refining, smart leather processing and textile industries, and the construction industry. Highlights the role of 3D printing in realizing the full potential of nanotechnology. Considers synthetic strategies with a focus on greener protocols for the fabrication of nanostructured materials with enhanced properties and better control, including these materials' characterization and significant properties for ensuring smart outputs. Offers a unique perspective on applications in industrial waste recycling and treatment, along with challenges in terms of safety, economics, and sustainability in industrial processes. This work is written for researchers and industry professionals across a variety of engineering disciplines, including materials, manufacturing, process, and industrial engineering.

Download or read book Micro Nanolithography written by Jagannathan Thirumalai and published by BoD – Books on Demand. This book was released on 2018-05-02 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to give proficient people a comprehensive review of up-to-date global improvements in hypothetical and experimental evidences, perspectives and prospects of some newsworthy instrumentation and its numerous technological applications for a wide range of lithographic fabrication techniques. The present theme of this book is concomitant with the lithographic ways and means of deposition, optimization parameters and their wide technological applications. This book consists of six chapters comprehending with eminence of lithography, fabrication and reproduction of periodic nanopyramid structures using UV nanoimprint lithography for solar cell applications, large-area nanoimprint lithography and applications, micro-/nanopatterning on polymers, OPC under immersion lithography associated to novel luminescence applications, achromatic Talbot lithography (ATL) and the soft X-ray interference lithography. Individual chapters provide a base for a wide range of readers from different fiels, students and researchers, who may be doing research pertinent to the topics discussed in this book and find basic as well as advanced principles of designated subjects related to these phenomena explained plainly. The book contains six chapters by experts in different fields of lithographic fabrication and technology from over 15 research institutes across the globe.

Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2017-12-19 with total page 1720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on... Silicon-on-insulator (SOI) materials and devices Supercritical CO2 in semiconductor cleaning Low-κ dielectrics Atomic-layer deposition Damascene copper electroplating Effects of terrestrial radiation on integrated circuits (ICs) Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication. While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.

Download or read book Direct Write Technologies for Rapid Prototyping Applications written by Alberto Pique and published by Academic Press. This book was released on 2002 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct-Write Technologies covers applications, materials, and the techniques in using direct-write technologies. This book provides an overview of the different direct write techniques currently available, as well as a comparison between the strengths and special attributes for each of the techniques. The techniques described open the door for building prototypes and testing materials. The book also provides an overview of the state-of-the-art technology involved in this field. Basic academic researchers and industrial development engineers who pattern thin film materials will want to have this text on their shelves as a resource for specific applications. Others in this or related fields will want the book to read the introductory material summarizing isuses common to all approaches, in order to compare and contrast different techniques. Everyday applications include electronic components and sensors, especially chemical and biosensors. There is a wide range of research and development problems requiring state-of-the-art direct write tools. This book will appeal to basic researchers and development engineers in university engineering departments and at industrial and national research laboratories. This text should appeal equally well in the United States, Asia, and Europe. Both basic academic researchers and industrial development engineers who pattern thin film materials will want to have this text on their shelves as a resource for specific applications. An overview of the different direct write techniques currently available A comparison between the strengths and special attributes for each of the techniques An overview of the state-of-the-art technology involved in this field

Download or read book Nano and Giga Challenges in Microelectronics written by J. Greer and published by Elsevier. This book was released on 2003-10-24 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed as an introduction for engineers and researchers wishing to obtain a fundamental knowledge and a snapshot in time of the cutting edge in technology research. As a natural consequence, Nano and Giga Challenges is also an essential reference for the "gurus" wishing to keep abreast of the latest directions and challenges in microelectronic technology development and future trends. The combination of viewpoints presented within the book can help to foster further research and cross-disciplinary interaction needed to surmount the barriers facing future generations of technology design. Key Features: • Quickly becoming the hottest topic of the new millennium (2.4 billion dollars funding in US alone • Current status and future trends of micro and nanoelectronics research • Written by leading experts in the corresponding research areas • Excellent tutorial for graduate students and reference for "gurus"

Download or read book Advanced Processes for 193 nm Immersion Lithography written by Yayi Wei and published by SPIE Press. This book was released on 2009 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to advanced processes and materials used in 193-nm immersion lithography (193i). It is an important text for those new to the field as well as for current practitioners who want to broaden their understanding of this latest technology. The book can be used as course material for graduate students of electrical engineering, material sciences, physics, chemistry, and microelectronics engineering and can also be used to train engineers involved in the manufacture of integrated circuits. It provides techniques for selecting critical materials (topcoats, photoresists, and antireflective coatings) and optimizing immersion processes to ensure higher performance and lower defectivity at lower cost. This book also includes sections on shrinking, trimming, and smoothing of the resist pattern to reduce feature sizes and line-edge roughness. Finally, it describes the recent development of 193i in combination with double exposure and double patterning.

Download or read book Semiconductor Lithography written by Wayne M. Moreau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor lithography is one of the key steps in the manufacturing of integrated silicon-based circuits. In fabricating a semiconductor device such as a transistor, a series of hot processes consisting of vacuum film deposition, oxidations, and dopant implantation are all patterned into microscopic circuits by the wet processes of lithography. Lithography, as adopted by the semiconductor industry, is the process of drawing or printing the pattern of an integrated circuit in a resist material. The pattern is formed and overlayed to a previous circuit layer as many as 30 times in the manufacture of logic and memory devices. With the resist pattern acting as a mask, a permanent device structure is formed by subtractive (removal) etching or by additive deposition of metals or insulators. Each process step in lithography uses inorganic or organic materials to physically transform semiconductors of silicon, insulators of oxides, nitrides, and organic polymers, and metals, into useful electronic devices. All forms of electromagnetic radiation are used in the processing. Lithography is a mUltidisciplinary science of materials, processes, and equipment, interacting to produce three-dimensional structures. Many aspects of chemistry, electrical engineering, materials science, and physics are involved. The purpose of this book is to bring together the work of many scientists and engineers over the last 10 years and focus upon the basic resist materials, the lithographic processes, and the fundamental principles behind each lithographic process.

Download or read book Magnetic Materials Processes and Devices VI written by and published by The Electrochemical Society. This book was released on 2001 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Silicon Compatible Materials Processes and Technologies for Advanced Integrated Circuits and Emerging Applications 6 written by Fred Roozeboom and published by The Electrochemical Society. This book was released on with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: